• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.62-67
• /
• 2002

While upwelling regions account for only 0.1% of the ocean surface, they yield over 40% of world's fish catch. Thus it is vary important making upwelling region by various methods. This study was performed to find out basic hydrodynamic characteristics (function, stability..,) of artificial upwelling structures. The hydrodynamic characteristics of artificial upwelling structures can be summarized as follows: 1) The falling velocity of blocks was effected size($l_B$) of blocks than incident current velocity( $V_0$). 2) The falling horizontal distance was reduced as induce of stratification parameters and block' size. 3) Generation of artificial upwelling current was effected by size of structures and incident current. When stratification parameters was about 3.0 and relative height(hs/h) of structures was about $0.125{\sim}0.15$, stable artificial upwelling current was generated in the back-side of structures.

• 한국해양공학회지
• /
• 제21권4호
• /
• pp.21-27
• /
• 2007

The multiplication equipment of marine products with artificial upwelling structures could be useful in the fishing grounds near coastal areas. Artificial upwelling structures could move the inorganic nutrients from the bottom to the surface. Artificial upwelling structures have been used to improve the productivity of fishing grounds. Until now, research on artificial upwelling structures has been related to the distribution of the upwelling region, upwelling structures, and the marine environment. However, little work on the optimum design of the rubber-mound artificial upwelling structures has been done to increase the efficiency of drawing up the inorganic nutrients. This study investigated the optimum cross-section of rubber-mound artificial upwelling structures by means of hydraulic experiments. The hydraulic experiments include the falling test of rubber. Based on the results of the falling test, the relationship between the length of the rubber mound and water velocity, and the relationship between the shape of the rubber and the stratification parameter were established. In addition, the effect of the void ratio of various artificial structures on the stratification parameter was studied. From the experiment, it was found that upwelling could be enhanced when the ratio of structure height to water depth was 0.3 and stratification parameter was 3.0. The upwelling was not improved when the void ratio exceeded 0.43. The optimum size of rubber mounds was determined when the incident velocity was influenced by the mean horizontal length rather than size of block.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.277-282
• /
• 2002

This study was performed to find out basic function of artificial upwelling structures. Generation of artificial upwelling current was affected by size of structures, incident current and porosity. when stratification parameters was about 3.0, relative height(hs/h) of structures was $0.125{\sim}0.15$, stable artificial upwelling current was generated in the back-side of structures. when porosity is lower than 50%, the effect of artificial upwelling structure was to be better than little by little.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.290-293
• /
• 2006

From the hydraulic experiment, it was concluded that upwelling could be enhanced when the relative structure height (the ratio of structure height to water depth) was 0.3 and stratification parameter was 3.0. In addition, the optimum size of rubbers was determined that the effect of the mean horizontal length of block was affected incident velocity than size of block. In the numerical experiment, the relation between the shape of rubber and stratification parameter was verified, ana the hydraulic characteristics of 3-D flow field around the artificial structures were investigated. Phenomena of flow field around the artificial upwelling structures corresponded with the results of hydraulic experiment. The position with maximum velocity in artificial upwelling structure was the center of top of its front side and the slip stream occurred at the inside and behind-bottom of artificial upwelling structures. The velocity of slip stream and early amplitude of velocity were higher in the inside than the behind-bottom.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2005년도 추계학술대회지
• /
• pp.133-137
• /
• 2005

인공용승구조물 설치해역에서 구조물 설치에 따른 해양환경변화를 조사하였다. 남해안의 전선역에 인접한 연구해역의 남동역에서 고온$\cdot$고염의 분포가 하계에 뚜렷하게 나타났다. 또한 구조물 설치 해역에서는 구조물 설치에 따른 유동의 변화 양상을 볼 수 있었다. 하계 영양염은 표층과 중층에서 구조물 투하 전인 2002년보다 구조물 투하 후인 2005년에 크게 증가하였다. 인공용승구조물설치에 따른 해역의 해양환경특성을 파악하기 위해서는 구조물 효과에 의한 구조물 투하 전$\cdot$후의 보다 장기적인 해양환경조사를 통한 환경변화를 정량적으로 파악할 필요가 있다.

• 해양환경안전학회지
• /
• 제14권1호
• /
• pp.21-27
• /
• 2008

삼각형상 구조물은 바다에서 풍요로운 어장을 만들기 위해 용승류를 발생시키기 위한 인공용승구조물의 기본적인 형태로 이용되고 있다. 인공용승류는 많은 양의 영양염류를 포함하고 있는 저층의 바닷물을 해저로부터 표층으로 끌어 올리는 작용을 한다. 이 연구의 목적은 여러 가지 성층계수에 따른 삼각형상 수중구조물 주위의 유동특성을 규명하는 것이다. 회류수조 내에서 삼각형상 구조물 모델을 대상으로 유동특성을 조사하기 위하여 유동가시화 방법을 이용한 실험적 연구를 수행하였고, 입자영상유속계(PIV)를 이용하여 수중구조물 주위의 유동장을 계측하였다. 실험결과 구조물 후상부 영역에서의 용승효과는 수심이 구조물 높이의 2배이고, 성층계수가 약 3.0일 때 가장 좋은 결과가 나타났다. 이러한 정량적인 데이터는 인공용승구조물의 기능적 효율을 결정하는 데에 유용하게 이용될 수 있을 것이다.

• 해양환경안전학회지
• /
• 제12권1호
• /
• pp.1-8
• /
• 2006

인공용승구조물 설치해역에서 구조물 설치에 따른 해양환경변화를 조사하였다. 남해안의 전선역에 인접한 연구해역의 남동역에서 고온 고염의 분포가 하계에 뚜렷하게 나타났다. 또한 구조물 설치에 따른 유동의 변화 양상을 볼 수 있었다. 한편, 영양염 분포를 보면, 하계 영양염은 표층과 중층에서 구조물 투하 전인 2002년보다 구조물 투하 후인 2005년에 크게 증가하였다. 따라서 구조물 설치로 인한 구조물 설치 전과 후의 해양환경 변화양상은 구조물 설치 효과에 영향을 받고 있음을 알 수 있다. 인공용승구조물설치에 따른 해역의 해양환경특성을 파악하기 위해서는 구조물 설치 전 후의 단기적 비교로부터 보다 장기적인 해양환경조사를 통하여 구조물설치에 따른 효과가 제시되어야 한다.

• 수산해양기술연구
• /
• 제44권3호
• /
• pp.207-217
• /
• 2008

Costal regions in Korea often suffer severe damages due to wave-induced disasters, storm surge disasters and so on. therefore, many engineers and researchers have devoted their energy to prevent these costal disasters. The development of artificial reefs including sunken vessels is one of their remarkable achievements and various kind of these artificial upwelling structures have been designed and applied. However, the flow characteristics around a Tetrapod under the water has not been investigated experimentally. So in this article, in uniform flow of circulating water channel and some different velocities, PIV measurement has been conducted on the flow characteristics behind a Tetrapod. The results were analyzed on the flow characteristics of both cases of a Tetrapod. Therefore, it can be concluded that the both cases have its own distinctive flow characteristics behind the bluff body; Case A has an steep upstream flow pattern. On the contrary, Case B has an developed downstream flow pattern in the near wake of the Tetrapod. The velocity gradient at position x=150mm of Case-A appears gently up and down But, the velocity gradient at the same position of Case-B appears better highly up and down.