• Journal of the Korean Solar Energy Society
• /
• v.32 no.6
• /
• pp.11-21
• /
• 2012

In the normal office building, the energy consumption to maintain the reasonable intensity of illumination for the work by using the artificial illumination occupies 30% or greater of the whole building electric energy consumption. If the dependability of the artificial illumination is dropt by positively using the natural lighting from the outside, the large amount of electrical energy can be saved, in addition the more nice visual environment for work can be created. Daylight is lighting source that most closely match visual response of the human, because sunlight and skylight achieve the harmony. For this reason, the daylight of small amount than amount of the artificial lighting source also can give the same effect in work activities of human. In addition, if there is daylight at the window of the building, the energy can be saved by controlling the artificial lighting. In this paper, in the building using the photovoltaic power generation analyze the correlation between the amount of energy generated by photovoltaic and indoor illumination and this was proved through the simulation with Relux 2010. In addition, the amount of daylight inflow in the room and distribution was drawn by the equation and the ratio for the sectional dimming control of each lighting equipment was predicted and the energy saving amount according to this was calculated. As a result, the indoor illumination was satisfied with recommended illumination value of the office and consumption power could be reduced approximately with 20~70%.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.210-216
• /
• 2004

Flow visualization techniques were employed to qualitatively visualize the flow patterns through a 400％ scaled up centrifugal blood pump. The apparatus comprised of a scaled up centrifugal pump. high speed video camera. Argon Ion Laser Light Sheet and custom coded particle tracking software. Reynolds similarity laws are applied in order to reduce the rotational speed of the pump. The outlet (cutwater) region was identified as a site of high turbulence and thus a likely source of haemolysis. The region underneath the impeller was identified as a region of lower flow.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.41-51
• /
• 2014

The purpose of this study is to understand the relationship between physical characteristics and general people's perception. In this study, the physical quantities of artificial lighting were measured from the visual point of the pedestrian and general public perception including preference and satisfaction was examined. As a result of this study, the total luminance and mean luminance had different value in each site. However, there were no significant differences in area and number of light source between sites. The effects of these factors are affected by indoor lighting. In the group of respondents, 10s people, male, students, meeting, 1~2 times a month and 18:00~20:00 had higher satisfaction compared to other groups respectively. A total luminance and mean luminance gave effect on the satisfaction of physical quantities of artificial lighting and the satisfaction on night landscape. With increase in total luminance and mean luminance, the satisfaction was lowered. It is necessary to reflect these factors on the future policies of nightscape.

• KIEAE Journal
• /
• v.12 no.5
• /
• pp.77-84
• /
• 2012

Daylighting is the controlled admission of natural light into a space, reducing electric lighting and saving energy. By providing a direct link to the dynamic and perpetually evolving patterns of outdoor illumination, daylighting helps create a visually stimulating and comfort environment for building occupants, while reducing energy costs. Especially, however, glare is the most important factor in daylighting, which is issued by incoming direct sunlight into windows. This study analyzed the discomfort glare on a daylighting window by using Image processing methodology and found a solution to problems with glare source of occupants. There are several ways to evaluate discomfort glare such as UGR (Unified Glare Rating) of CIE, DGI (Daylight Glare Index, Hopkinson, 1972) and VCP (Visual Comfort Probability) of IES. These are used to apply to the relatively little artificial light source and they cannot cover discomfort glare from a real daylighting window. In this regarding, this paper aimed to calculate DGI index of the real daylighting window in a experimental space by using image processing methodology. The variables and outcomes are luminance distribution of non-shading window, effect of venetian blind installed on the window and locations related to position index of DGI.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.2 no.1
• /
• pp.113-121
• /
• 2000

The effect of Sunlight exposure on reducing the microorganism counts in the bedding materials was experimented by using 3 kinds of microorganisms(S. aureus, K. pnenmoniae and E. coli) and 3 kinds of fabrics (cotton, silk and polyester). Counts of the microorganism were examined before and after sunlight exposure. The sunlights were controlled U.V and Daylight D50 using MacBeth artificial light source. The specimens were exposed for 5 min, 10 min and 30 minutes under the $20^{\circ}C$ and 60% R.H, distance is 50cm from the light source. Results were as follows, 1. The reduction rate of the 3kinds of microorganisms was remarkably great under the U.V exposure. The U.V. exposure was very effective way to sterlize the bedding materials in the house care. 2. S. aureus was the most susceptible to U.V. exposure and the sunlight exposure. E. coli was the most resistant to the U.V and the sunlight exposure. 3. The reduction rate of the 3 kinds of fabrics was not significantly different. The polyester is more resistant than the silk and the cotton. Those were shown good reduction rate if all kinds of microorganism under the U.V and daylight.

• Journal of the Korean Home Economics Association
• /
• v.48 no.5
• /
• pp.17-24
• /
• 2010

Although design, color, and material are important elements in stage costumes, stage lightning also plays significant role in the presentation of stage costumes. Costumes color, material and perception can be significantly influenced by visual effects. Stage illumination can be arranged or managed so that colors are closely related to or enhanced or change the effects of costume colors on the runway or display at specific times. The results of this thesis are as follow; 1) Fabric tone, name, brightness, and chroma of colors were changed by the colors of stage lighting. 2) An achromatic color was changed to a chromatic color after being combined with colors of stage lighting. 3) Stage illuminations can make fabric, colors look similar to stage colors. 4) Plain satin silk fabric which reflects light shows high brightness and chroma after being influenced by stage lighting its shining effects and color changes were clear and apparent. 5) Velvet pile fabric which absorbs light shows low brightness and chroma after being influenced by stage lightning its shining effects and changes of colors were not clear and apparent. In conclusion, natural lights did not significantly influence fabric colors and perception, while artificial lights had wide range of effects on fabric colors and perception.

• Electronics and Telecommunications Trends
• /
• v.39 no.1
• /
• pp.48-61
• /
• 2024

The integration of high-capacity terrestrial networks with non-terrestrial communication using satellites has become essential to support seamless low-latency services based on artificial intelligence and big data. Tunable light sources have been instrumental in resolving the complexity of channel management in wavelength division multiplexing (WDM) systems, contributing to increased network flexibility and serving as optical sources for long-distance coherent systems. Recently, these light sources have been applied to beam-steering devices in laser communication and sensing applications across ground, aerial, and satellite transport. We examine the utilization and requirements of tunable lasers in WDM networks and describe the relevant development status. In addition, performance requirements and development directions for tunable lasers used in optical interference systems and beam-steering devices are reviewed.

• Current Optics and Photonics
• /
• v.6 no.5
• /
• pp.479-488
• /
• 2022

To account for the internal thermal effects of solid-state lasers, a method using a back propagation (BP) neural network integrated with a particle swarm optimization (PSO) algorithm is developed, which is a new wavefront distortion correction technique. In particular, by using a slab laser model, a series of fiber pumped sources are employed to form a controlled array to pump the gain medium, allowing the internal temperature field of the gain medium to be designed by altering the power of each pump source. Furthermore, the BP artificial neural network is employed to construct a nonlinear mapping relationship between the power matrix of the pump array and the thermally induced wavefront aberration. Lastly, the suppression of thermally induced wavefront distortion can be achieved by changing the power matrix of the pump array and obtaining the optimal pump light intensity distribution combined using the PSO algorithm. The minimal beam quality β can be obtained by optimally distributing the pumping light. Compared with the method of designing uniform pumping light into the gain medium, the theoretically computed single pass beam quality β value is optimized from 5.34 to 1.28. In this numerical analysis, experiments are conducted to validate the relationship between the thermally generated wavefront and certain pumping light distributions.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.3
• /
• pp.193-200
• /
• 2017

BACKGROUND: Plant growth under smart greenhouse (that is plant factory system) conditions of an artificial light type is significantly depending on the artificial light sources such as a fluorescent lamps or Light-Emitting Diodes (LEDs) with specific spectral wavelengths regardless of the outside environmental changes. In this experiment, characteristics on the growth and compound synthesis of kale seedlings affected by light qualities and intensities provided by LEDs were mentioned. METHODS AND RESULTS: The kale seedlings which developed 3~4 true leaves were exposed by fluorescent lamps or LEDs lights of red (R), blue+white (BW), blue+red (BR) with 50 (L) or $100(H){\mu}mol/m^2/s^1$ photosynthetic photon flux (PPF) under hydroponic culture system of deep flow technique for 50 days. Shoot fresh weight increased under the RH, BWH, and BRH treatments with higher PPF. Shoot elongation of the seedlings decreased, and polyphenol synthesis promoted by the higher light intensity conditions. Sugar synthesis in the leaves was above 2 times greater under the RH treatment of monochromic red light quality with $100{\mu}mol/m^2/s^1\;PPF$ than $50{\mu}mol/m^2/s^1\;PPF$. CONCLUSION: The results show that the control of light quality and intensity in the smart greenhouse conditions with artificial lights significantly affects the growth and compound synthesis in the fresh kale leaves with higher culture efficiency compared to the conventional soil culture under greenhouse or field conditions. Researches on the optimum light intensities of the LEDs with special spectral wavelengths are necessary for maximum growth and metabolism in the seedlings.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.8-14
• /
• 2020

Recently, there was an increasing demand for an integrated access control system which is capable of user recognition, door control, and facility operations control for smart buildings automation. The market available door lock access control solutions need to be improved from the current level security of door locks operations where security is compromised when a password or digital keys are exposed to the strangers. At present, the access control system solution providers focusing on developing an automatic access control system using (RF) based technologies like bluetooth, WiFi, etc. All the existing automatic door access control technologies required an additional hardware interface and always vulnerable security threads. This paper proposes the user identification and authentication solution for automatic door lock control operations using camera based visible light communication (VLC) technology. This proposed approach use the cameras installed in building facility, user smart devices and IoT open source controller based LED light sensors installed in buildings infrastructure. The building facility installed IoT LED light sensors transmit the authorized user and facility information color grid code and the smart device camera decode the user informations and verify with stored user information then indicate the authentication status to the user and send authentication acknowledgement to facility door lock integrated camera to control the door lock operations. The camera based VLC receiver uses the artificial intelligence (AI) methods to decode VLC data to improve the VLC performance. This paper implements the testbed model using IoT open-source based LED light sensor with CCTV camera and user smartphone devices. The experiment results are verified with custom made convolutional neural network (CNN) based AI techniques for VLC deciding method on smart devices and PC based CCTV monitoring solutions. The archived experiment results confirm that proposed door access control solution is effective and robust for automatic door access control.