• Structural Engineering and Mechanics
• /
• v.74 no.5
• /
• pp.601-609
• /
• 2020

In this article, the Strain Energy Density (SED) averaged over a well-defined control volume at a notch edge was applied in combination with the Equivalent Material Concept (EMC) to assess the fracture behaviors of some keyhole-notched specimens made of a High-Density Polyethylene (HDPE-PE80) material under mixed-mode loading conditions. An experimental program was performed and 54 new experimental data were totally provided. Additionally, different loading mode ratios were regarded by changing the inclination angles of the notches with respect to the applied load directions. The results obtained from the determined criteria were in good agreement with those of the experimental data.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3411-3420
• /
• 2014

Deficiencies in wear and frost resistance as well as mechanical strength constitute the main causes of equipment failure under the harsh climatic conditions of the Earth's polar regions. To improve the properties of the materials used in this equipment, nanoparticle composites have been prepared from clays such as kaolinite, hectorite, and montmorillonite in combination with polytetrafluoroethylene (PTFE) or ultrahigh molecular weight polyethylene (UHMWPE). A number of techniques have been proposed to disperse silicate particles in PTFE or UHMWPE polymer matrices, and several successful processes have even been widely applied. Polymer nanocomposites that exhibit enhanced mechanical and thermal properties are promising materials for replacing metals and glass in the equipment intended for Arctic use. In this article, we will review PTFE- and UHMWPE-based layered silicate nanocomposites.

• Archives of Plastic Surgery
• /
• v.40 no.6
• /
• pp.783-786
• /
• 2013

For years, the gold standard in facial rejuvenation has been the face lift. However, exploring new, less complex procedures for achieving the same goal is currently drawing interest. Rejuvenation of the perioral area is a difficult task for plastic surgeons because of the minimal effect that face lift procedures have over this region and the lack of published material on the subject. In this article, the descended mouth corner anguloplasty technique is presented. It is a 20-minutes lift technique that can correct this typical feature of the ageing mouth. The authors have treated 71 patients using the technique with consistently good results, with just one requiring revision. They conclude that this procedure by itself and in combination with other small operations or even a full face lift can rejuvenate the ageing face.

• Pediatric Infection and Vaccine
• /
• v.15 no.1
• /
• pp.12-19
• /
• 2008

Varicella is a highly infectious disease caused by the varicella zoster virus. The varicella vaccine was developed by Michiaki Takahashi in Japan in 1974. Despite the worldwide distribution of efficient vaccines, varicella vaccination policy is extremely variable from country to country. Although varicella vaccine is not currently recommended for universal vaccination in Japan, most countries throughout Europe, and developing countries, it had been introduced into Korea in 1988 and 20 years have elapsed since its use. Currently, varicella vaccine has been most extensively used in the United States where routine 2-dose vaccination program has been recently implemented for children. Recent 2-dose schedule in the United States and the availability of combination measles-rubella-varicella vaccines may lead to future varicella vaccination policy changes in many countries. With this background, this article summarizes the current status of varicella vaccination policies worldwide and presents provisional updated recommendation of varicella vaccination in Korea.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.111-118
• /
• 1999

This article describes the basic engineering concepts to be considered in the application of an induction heating furnace in the hot-dip galvanizing line. Experience in the Dongkuk project in Pohang, has shown that this arrangement has many advantages over the conventional method of using a combustion-gas heated furnace. Investment and operating costs are lower, the line length is much shorter, line operation is more convenient, air pollution is reduced, and the coated strip at of top-quality. As these benefits become well known, it is anticipated that the concept of induction heating will be more widely used in both new and revamped process lines. Induction heating is suitable for the production of Commercial Quality hot galvanized coils. More research is required to extend the present concept to the production of higher forming grades such as Drawing, Deep Drawing and Extra Deep Drawing Quality steels. A combination of induction heating and combustion-gas heating may lead to the way to the processing of these qualities of strip.

• Journal of the Korean Ceramic Society
• /
• v.49 no.1
• /
• pp.1-10
• /
• 2012

Super-plastic deformation that originates from transformation plasticity has favorable aspects for steels with improved strength and ductility. However, it also causes undesirable deformation of products or specimens, leading to their degradation. This article reviews recent investigations of transformation plasticity. A combination of newly suggested models, numerical analyses, and novel experiments has attempted to reveal the mechanism. Since the nature of the transformation plasticity is still unclear, there are significant challenges still to be solved. Fundamental understanding of transformation plasticity will be essential for the development of advanced steels.

• Journal of Yeungnam Medical Science
• /
• v.34 no.2
• /
• pp.161-168
• /
• 2017

Peripheral nerve blocks are commonly used for surgical anesthesia, postoperative analgesia, and to reduce opioid requirements. Although these blocks have traditionally been carried out using local anesthetics, single-injection techniques can be short-lived and limited by the relatively brief duration of action of currently available local anesthetics. Increasing the dose or concentration of local anesthetics may prolong the duration of analgesia, but may also increase the risk such as unwanted motor weakness or systemic toxicity of local anesthetics. Numerous adjuvant medications have been added to local anesthetics to prolong the durations of anesthesia and analgesia achieved by peripheral nerve blocks, and currently, a number of different adjuvants are used to improve quality of the block. This article will review the several nerve block adjuvants used in combination with local anesthetics to provide blockade of peripheral nerves in clinical practice, describing the rationale for their use in peripheral nerve blocks, and the evidence for their effectiveness.

• Knowledge Management Research
• /
• v.2 no.1
• /
• pp.109-132
• /
• 2001

The purpose of this article is to develop a dynamic model of organizational capabilities and knowledge creation, and at the same time identify the organizational capability factors for effective knowledge creation, by empirically analyzing the history of new Quinolone antibacterial drug compound (LB20304a) discovery process at LG, as a case in point. Major findings of this study are as follows. First, in a science-based area such as drug development, the core of successful knowledge creation lies in creative combination of different bodies of scientific explicit knowledge. Second, the greater the difficulty of learning external knowledge, the more tacit knowledge is needed for the recipient firm to effectively exploit that knowledge. Third, in science-based sector such as pharmaceutical industry, the key for successful knowledge creation lies in the capability of recruiting and retaining star scientists. Finally, for effective knowledge creation, a firm must keep its balance among three dimensions of organizational capabilities: local, process, architectural capabilities.

• Journal of Multimedia Information System
• /
• v.4 no.2
• /
• pp.79-82
• /
• 2017

Smoke and fire have different shapes and colours. This article suggests a fully connected system which is used two features using Adaboost algorithm for constructing a strong classifier as linear combination. We calculate the local histogram feature by gradient and bin, local binary pattern value, and projection vectors for each cell. According to the histogram magnitude, this paper applied adapted weighting value to improve the recognition rate. To preserve the local region and shape feature which has edge intensity, this paper processed the normalization sequence. For the extracted features, this paper Adaboost algorithm which makes strong classification to classify the objects. Our smoke detection system based on the proposed approach leads to higher detection accuracy than other system.

• Korean Journal of Biological Psychiatry
• /
• v.7 no.1
• /
• pp.34-45
• /
• 2000

Pharmacotherapy of bipolar disorder is a rapidly evolving field. Mood stabilizers and anticonvulsants have varying biochemical profiles which may predispose them to different adverse effects and drug-drug interactions. Several of the new anticonvulsants appear less likely to have the problems with drug-drug interaction. To provide more effective combination pharmacotherapies, clinicians should be allowed to anticipate and avoid pharmacokinetic and pharmacodynamic drug-drug interactions. We reviewed the role of cytochrome P450 isozymes in the metabolism of the drugs and their interactions. The drug-drug interactions of several classes of drugs which used as mood stabilizers and new anticonvulsants, some of which may have psychotropic profiles, are discussed mainly in this article. Finally, potential pharmacokinetic interactions between the benzodiazepines and other coadministered drugs are discussed briefly.