• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.111-118
• /
• 2014

PURPOSES: The purposes are to analyze the pedestrian accident severity and to develop the accident models by arterial road function. METHODS: To analyze the accident, count data and ordered logit models are utilized in this study. In pursuing the above, this study uses pedestrian accident data from 2007 to 2011 in Cheongju. RESULTS : The main results are as follows. First, daytime, Tue.Wed.Thu., over-speeding, male pedestrian over 65 old are selected as the independent variables to increase pedestrian accident severity. Second, as the accident models of main and minor arterial roads, the negative binomial models are developed, which are analyzed to be statistically significant. Third, such the main variables related to pedestrian accidents as traffic and pedestrian volume, road width, number of exit/entry are adopted in the models. Finally, Such the policy guidelines as the installation of pedestrian fence, speed hump and crosswalks with pedestrian refuge area, designated pedestrian zone, and others are suggested for accident reduction. CONCLUSIONS: This study analyzed the pedestrian accident severity, and developed the negative binomial accident models. The results of this study expected to give some implications to the pedestrian safety improvement in Cheongju.

• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.135-144
• /
• 2013

PURPOSES : The purpose of this paper is to develop a methodology to estimate level of service of arterial including Exclusive Median Bus Lanes. METHODS : On 6 Exclusive Median Bus Lanes routes in Seoul, bus travel time and number of bus-stop per km were investigated. Also whether or not passing lane exists at bus-stop was checked. Based on the data from sites, bus travel time was estimated according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. RESULTS : A bus travel time table was developed according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. After bus travel speed and passenger car travel speed is estimated based on each travel time table and length of segment, two speeds are combined with weighted average speed using traffic volume of each lane group. Then weighted average speed is a measure of effectiveness of arterial including Exclusive Median Bus Lanes. CONCLUSIONS : It can be concluded that the proposed methodology can estimate level of service of arterial including Exclusive Median Bus Lanes considering the operation characteristics of Exclusive Median Bus Lanes.

• Journal of Korean Society of Transportation
• /
• v.11 no.2
• /
• pp.63-84
• /
• 1993

The main purpose of this paper is to develop a route guidance system which is a part of the intelligent vehicle-highway system and to apply to a real world in order to evaluate usefulness of the system. To this end, significant literature review works with regard to vehicle navigation and route guidance systems were conducted and have provided an important information about state-of-the-art systems developed and tested by the advanced countries. A geographic information system, called INTGIS, was used to find the shortest path in a given road network. Three scenarios to find minimum path were simulated and observed : 1) with-constraint on intersections and road segments, 2) without-constraint on intersections and road segments, and 3) via several stops from origin to destination. Based on a series of experiments, the results indicate that the route guidance system developed in this research is very useful to inform drivers on highway and arterial the traffic informations such as congestion and incident.

• Journal of the Korean Society of Safety
• /
• v.28 no.6
• /
• pp.84-89
• /
• 2013

The main causes of traffic accidents can be classified by 3 factors - human error, vehicle deficiency and road environmental problem and most accidents occurs not only 1 factor but combination of 2 or 3-factors. Among these factors, road environmental factor is the most important factor due to influence the behavior of cars and road users and road environmental factor affects 30% of total accidents approximately. The 5 years traffic accidents data analyzed to verify the accidents severity on Korea National Highways. In order to analyze the severity, Ordered Probit Model was used. As a independent variables of this model the number of lane, neighbor road environments, sight distance, vertical grade, lane width, shoulder width and traffic volume were used and as a dependent variables the minor injuries, serious injuries and fatalities were used. Research results shows that sight distance and lane width are identified as significant factors for the traffic accident severity and lesser sight distance and lane width shows greater traffic accident severity.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.43-49
• /
• 2010

This study deals with the traffic accident of the Cheongju arterial link sections. The purpose of the study is to develop the traffic accident model. In pursuing the above, this study gives particular attentions to developing the ZAM(zero-altered model) model using the accident data of arterial roads devided by 322 small link sections. The main results analyzed by ZIP(zero inflated Poisson model) and ZINB(zero inflated negative binomial model) which are the methods of ZAM, are as follows. First, the evaluation of various developed models by the Vuong statistic and t statistic for overdispersion parameter ${\alpha}$ shows that ZINB is analyzed to be optimal among Poisson, NB, ZIP(zero-inflated Poisson) and ZINB regression models. Second, ZINB is evaluated to be statistically significant in view of t, ${\rho}$ and ${\rho}^2$ (0.63) values compared to other models. Finally, the accident factors of ZINB models are developed to be the traffic volume(ADT), number of entry/exit and length of median. The traffic volume(ADT) and the number of entry/exit are evaluated to be the '+' factors and the length of median to be '-' factor of the accident.

• Journal of Korean Society of Transportation
• /
• v.31 no.5
• /
• pp.16-25
• /
• 2013

This study deals with the relationships between flashing operation and traffic accident at signalized intersections. The objective of this study is to analyze safety effects of the yellow flashing operation at night. In pursuing the above, this study gives particular attention to evaluating the safety results from signal operation of Cheongju's 190 signalized intersections using before-after evaluation with comparison group that are categorized by highway function. The main results are as follow. First, the numbers of traffic accidents and of fatalities/injuries in two highway types (arterial and collector road) have increased after operating the yellow flashing signal at night. Second, the numbers of accidents, fatalities/injuries, severe accidents and of fatalities/severe injuries in group A(arterial) have increased by 19%, 36%, 15% and 14%, respectively. Finally, the numbers of accidents, fatalities/injuries, severe accidents and fatalities/severe injuries in group B (collector) have increased by 50%, 64%, 41% and 77%, respectively.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.167-174
• /
• 2017

PURPOSES: This study aims to analyze the impact of the implementation of a school zone traffic safety improvement project on the number of accidents involving children in these zones. METHODS : To analyze the correlation between school zone traffic safety features of roads in the zone and the number of accidents involving children, we developed an occurrence probability model of traffic accidents involving children by using a binary logistic regression model with SPSS 23.0 software. Two separate models were developed for two zones: interior block and arterial road. RESULTS :The model depicted that in the case of the interior block, shorter sidewalk width, speed bump, and an elevated crosswalk were key factors affecting the occurrence of accidents involving children. In the case of arterial roads exceeding a width of 12 m, the speed limit, roadside barriers, and red paving of road surfaces were found to be the key factors. CONCLUSIONS:The results of this study can serve as the elementary research data to help improve the effectiveness of school zone traffic safety improvement projects and school zone road repair projects in future.

• International Journal of Highway Engineering
• /
• v.17 no.1
• /
• pp.105-118
• /
• 2015

PURPOSES : This study aims to evaluate the road safety of the super-elevation transition section of a left turn curve and suggest the minimum longitudinal grade of a super-elevation transition section to be used before and after a left curved section. METHODS : We evaluated the road condition by means of the safety-criterion-evaluation method involving side friction factors, and then solve the problem by introducing the minimum longitudinal grade criterion based on conditions described in the hydraulics literature. RESULTS : It was calculated that when a road satisfies hydroplaning conditions, the difference between side friction assumed and side friction demanded is less than -0.04. In this case, the safety criterion for the condition is unsatisfied. Conversely, when a road is in a normal state under either wet or dry conditions, it was calculated that the difference between side friction assumed and side friction demanded is more than 0.01. Thus, the safety criterion for this condition is found to be satisfied. After adjusting the minimum longitudinal grade applied to a super-elevation transition section, the hydroplaning condition can be eliminated and the safety criterion can be met for all sections. CONCLUSIONS : It is suggested that a minimum longitudinal grade should be provided on super-elevation transition sections in order to prevent hydroplaning.

• International Journal of Highway Engineering
• /
• v.20 no.3
• /
• pp.85-92
• /
• 2018

PURPOSES : In this study, analyze the characteristics of IOC indicator 'threshold' which is needed when evaluating the traffic signal operation status with ESPRESSO in various grade road traffic environment of Seoul metropolitan city and derive suggested value to use in field practice. METHODS : Using the computerized database program (Postgresql), we extracted data with regional characteristics (Arterial, Collector road) and temporal characteristics (peak hour, non-peak hour). Analysis of variance and Duncan's validation were performed using statistical analysis program (SPSS) to confirm whether the extracted data contains statistical significance. RESULTS : The analysis period of the main and secondary arterial roads was confirmed to be suitable from 14 days to 60 days. For the arterial, it is suggested to use 20 km/h as the critical speed for PM peak hour and weekly non peak hour. It is suggested to use 25 km/h as the critical speed for AM peak hour and night non peak hour. As for the collector road, it is suggested to use 20 km/h as the critical speed for PM peak hour and weekly non peak hour. It is suggested to use 30 km/h as the critical speed for AM peak hour and night non peak hour. CONCLUSIONS : It is meaningful from a methodological point of view that it is possible to make a reasonable comparative analysis on the signal intersection pre-post analysis when the signal operation DB is renewed by breaking the existing traffic signal operation evaluation method.

• Transportation Technology and Policy
• /
• v.6 no.1
• /
• pp.155-170
• /
• 2009

In an effort to increase the operational efficiency of highways, South Korea has been increasing its design speed recently. However, the use of higher design speed will also increase construction costs. Moreover, increasing the design speed is expected to have an impact on safety. Hence, there is a strong need to demonstrate that the benefits outweigh the cost of having a higher design speed. This study surveyed a sample of design engineers to determine their awareness of the consequences of increasing design speed and their assessment of the right design speed for an actual rural arterial. In addition to the survey, a case study of three recently upgraded highways was conducted to determine the changes in traffic volumes, speeds, travel times, and safety.