• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.459-464
• /
• 2012

The point of impact, the shot group, and the flight traces depend on the combination of unique features which decide moving traces of the arrow (paradox of the archer, length of the arrow shaft, weight, angle of the feather, and spline of the arrow shaft). The more dense the impact points in the shot group and the earlier elimination of paradox of the archer, the higher assessment is given for the product. However, there is no way to objectively assess the efficiency and quality of the arrow, and there is no numeric data to be used as the basis for comparison with other products. Although capturing the images of flying arrow using a high-speed motion picture camera is possible, we are limited to observation from specific view angle only. Hence, the criteria for efficiency and quality assessment are mostly based on subjective opinions of experts or hunters, or review on consumers' remarks. In this paper, we propose a hardware composition that are based on three detection frames consisting of line lasers and photo diode arrays without the high-speed motion picture camera. Predicated on measured coordinates data, a nobel method for the archer's paradox measurement, a key parameter that determine the arrow's trajectory, and corresponding numerical analysis model is proposed.

• 한국지능시스템학회논문지
• /
• 제22권4호
• /
• pp.521-526
• /
• 2012

제조공정을 통해 생산된 화살의 성능은 화살의 이동궤적(궁사의 패러독스)과 탄착점의 집적도에 따라 좌우된다. 특히 동일한 환경에서 반복적으로 화살의 슈팅실험을 수행할 경우, 반복실험에서 얻어진 화살의 탄착점 집적도는 화살 성능 평가에서 중요한 객관적 지표가 된다. 그러나 화살의 탄착점에 대한 분석은 현재 상용화된 기술이 부족하며, 기존의 연구들은 화살의 성능에 영향을 미치는 제조공정 변수(화살깃, 화살촉, 화살의 곧기, 중량, 외경, 스파인)만을 최적화하려는 방향으로 기술력이 집중되어 있다. 본 논문에서는 화살의 주요성능지표인 화살의 탄착점 측정 자동화를 위해, Mamdani 퍼지 추론 시스템(Mamdani Fuzzy Inference System)과 도형의 닮음(Similarity of Polygon)을 이용한 화살의 탄착점 측정 시스템을 제안한다. 라인레이저(Line Laser)와 포토다이오드어레이(Photo Diode Array)를 이용하여 고속(약 275km/h)으로 이동하는 화살의 탄착점 데이터를 계측하고, 계측된 데이터를 퍼지 추론과 도형의 닮음을 이용하여 화살의 탄착점으로 사상(Mapping) 시킨다.

• Journal of Korean Neurosurgical Society
• /
• 제29권11호
• /
• pp.1538-1541
• /
• 2000

Apenetrating head injury by an arrow is extremely rare being only two cases reported in the literature. We report a case of 12-year-old boy who presented with an arrow lodged at the posterior fossa through nasal nostril. He was slightly drowsy, but neurologically intact except a sixth nerve palsy in the left eye. Brain CT showed no intracerebral hemorrhage. The arrow was entered through the right nostril and the tip was stucked in the left cere-bello-pontine angle through the sphenoid sinus. We removed the arrow without craniotomy since the tip was verified smooth and no cerebral arteries were in contact with the arrow. The patient recovered well without any significant complications. The sixth nerve palsy resolved completely after six months. The verification of the shape of the offending material, a retrograde removal of the arrow in the direction of its line of trajectory, and an identification of adjacent cerebral arteries seem to be important in the management of this type of injury.

• 한국운동역학회지
• /
• 제34권1호
• /
• pp.34-44
• /
• 2024

Objective: This study aimed to investigate how the movements occurring during the follow-through phase after releasing an arrow among elite compound archers, are associated with the arrow impact points on the target. Method: Nine elite archers performed consecutive compound archery shooting under conditions identical to actual competitions using their own bows and equipment. Motion capture system and force platform were utilized to record the changes in joint positions and center of pressure, respectively. Principal component analysis was employed to identify the patterns in which multidimensional joint positions and COP changes were organized with horizontal and vertical coordinates of arrow impact points. Subsequently, correlation analysis quantified the relationship between individual variables and the coordinates of arrow impacts on the target. Results: We found a common organizational pattern in which the two axes of the impact point coordinates were grouped into the first two principal components. The movements of the upper and lower limbs following release exhibited opposite patterns in the anterior-posterior axis, with significant correlations observed between the arrow impact points of the horizontal axis and the left shoulder, right elbow, left hip, and both knees. Additionally, the lateral movements induced by the reaction force upon arrow release showed significant associations with the vertical coordinates of the impact points. Particularly, the correlations between the movements of the left shoulder and elbow, as well as the bilateral hip and right knee, were consistently observed among all participants. Conclusion: These findings implied that the post-release movements could significantly influence the trajectory and impact points of the arrows in compound archery. We suggest that a consistent and controlled movement during the follow-through phase may be more beneficial for optimizing shooting accuracy and precision rather than minimizing movements.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1088-1095
• /
• 2009

In this paper, we describe the reorientation method of distorted road sign by using projection transformation for improving recognition rate of road sign. RSR (Road Sign Recognition) is one of the most important topics for implementing driver assistance in intelligent transportation systems using pattern recognition and vision technology. The RS (Road Sign) includes direction of road or place name, and intersection for obtaining the road information. We acquire input images from mounted camera on vehicle. However, the road signs are often appeared with rotation, skew, and distortion by perspective camera. In order to obtain the correct road sign overcoming these problems, projection transformation is used to transform from 4 points of image coordinate to 4 points of world coordinate. The 4 vertices points are obtained using the trajectory as the distance from the mass center to the boundary of the object. Then, the candidate areas of road sign are transformed from distorted image by using homography transformation matrix. Internal information of reoriented road signs is segmented with arrow and the corresponding indicated place name. Arrow area is the largest labeled one. Also, the number of group of place names equals to that of arrow heads. Characters of the road sign are segmented by using vertical and horizontal histograms, and each character is recognized by using SAD (Sum of Absolute Difference). From the experiments, the proposed method has shown the higher recognition results than the image without reorientation.

• 한국지능시스템학회논문지
• /
• 제22권5호
• /
• pp.669-674
• /
• 2012

본 논문은 아이폰을 사용하여 WiFi 통신을 기반으로 이동로봇을 원격 제어하는 연구에 대하여 다룬다. 무선제어를 위하여 다음과 같은 세 가지 인터페이스를 제안 한다 : 기울기 모드, 방향 터치 모드, 조그셔틀 모드. 세 가지 인터페이스를 평가하기 위해 모니터에 그려진 궤적을 아이폰의 인터페이스를 사용하여 가상 로봇을 제어 하였다. 세 가지 인터페이스의 장단점을 분석하기 위해 표준편차와 오차가 시뮬레이션에서 분석되었다. 제안된 인터페이스는 추가비용이 별도로 필요한 무선 제어기를 휴대폰으로 대체하게 해준다. 실험의 결과로 제안된 인터페이스들이 원격 로봇 제어를 위해 효과적으로 사용될 수 있음을 보여준다.