• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.538-541
• /
• 2003

BSCCO superconducting thin films have been fabricated by co-deposition using IBS(Ion Beam Sputtering) method. Despite setting the composition of thin film Bi2212 or Bi2223, in both cases, Bi2201, Bi2212 and Bi2223 phase were appeared. It was confirmed the obtained field of stabilizing phase was represented in the diagonal direction of the right below end in the Arrhenius plot of temperature of the substrate and PO$_3$, and it was distributed in the rezone. The XRD peak of the generated film continuously changed according to the substrate temperature.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1734-1739
• /
• 2007

The materials characteristics and lifetime evaluation are very important in design procedure to assure the safety and reliability of rubber components. This paper discusses the failure mechanism and material test were carried out to predict the useful life of NBR and EPDM rubber mount for compression motor which is used in refrigerator. In order to investigate the heat-aging effects on the materials properties, stress-strain curve were obtained from the results of material tests. Compression set results changes as the threshold are used for assessment of useful life and the time were plotted against reciprocal of absolute temperature to give the Arrhenius plot.

• Journal of the Korean Vacuum Society
• /
• v.3 no.1
• /
• pp.51-58
• /
• 1994

확산 현상은 박막성장 과정 및 박막의 기계, 전기, 자기적 성질 이해에 중요한 역할을 한다. 열 처리에 의한 상호확산 때문에 생긴 Pd/Cu 다층박막의 조성변화를 AES depth-profiling 방법을 이용해 서 조사하였다. 열처리전 시료에서의 각형의 초기 조성분포가 여러온도에서의 열처리에 의해 정현파 모 양의조성분포로 변화되었다. 조성의존성을 고려하지 않은 상호확산 계수를 정현파 분포의 진폭으로부터 구하였으며, 1.66 eV의 값을 갖는 활성화에너지는 Arrhenius plot으로부터 산출하였다. 또한 Boltzmann-Matano 방법을 사용해서 15$0^{\circ}C$에서의 조성의존 상호확산계수도 구하였다. 열처리에 의해 조 성균일화가 되는 것으로만 알려졌던 본물질계에서도 상분리가 생성됨을 관찰하였고, 그 열처리 조건은 $180^{\circ}C$에서 150분 보다 짧아야함을 밝혔다.

• Journal of Powder Materials
• /
• v.5 no.4
• /
• pp.241-249
• /
• 1998

Sintering kinetics of ball-milled $MoSi_2$ was studied with the addition of Ni. $MoSi_2$ powder with the average particle size of 1 $\mu\textrm{m}$ was obtained from ball-milling of 10 $\mu\textrm{m}$ powder. Small amount of Ni was added to the ball-milled $MoSi_2$ powder by salt solution and reduction method. The powder was compacted into cylindrical shape at 200 MPa and isothermally sintered in a $H_2$ atmosphere at the temperature range of 1100~$1400^{\circ}C$ for 3~600 minutes. The changes of linear shrinkage and sintered density were monitored as a function of sintering time. The microstructure was observed by using optical microscopy and scanning electron microscopy. Phases were identified by X-ray diffratometer and electro-probe micro analysis. Sintering kinetics of Ni-added powder was compared to as-milled powder and the apparent activation energy was calculated from Arrhenius plot.

• Journal of Pharmaceutical Investigation
• /
• v.15 no.1
• /
• pp.40-44
• /
• 1985

The stability of ftorafur in artificial gastric juice and its major decomposition product were studied quantitatively by the combination of TLC technique and UV-recording spectrophotometry. The decomposition proceeded in first-order reaction. The decomposition rate was accelerated by the increase of temperature. The major decomposition products were identified as 5-fluorouracil. The apparent activation energy for the decomposition was found to he approximately 24.3kcal/mole from Arrhenius plot.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.1
• /
• pp.6-13
• /
• 2010

Esterification reaction between succinic acid and 1,4-butanediol was kinetically investigated in the presence of nontoxic organometallic compound catalyst(ESCAT-100E) at $150-190^{\circ}C$. The reaction rates measured by the amount of distilled water from the reaction vessel. The Esterification reaction was carried out under the first order conditions respect to the concentration of reactants, respectively. The overall reaction order was 2nd. The linear relationship was shown between apparent reaction rate constant and reciprocal absolute temperature. By the Arrhenius plot the activation energy have been calculated as 376.13 kJ/mol under nontoxic organometallic compound catalyst and also apparent reaction rate constant, k' was found to obey first kinetics with respect to the concentration of catalyst.

• Journal of the Korean Applied Science and Technology
• /
• v.10 no.1
• /
• pp.23-29
• /
• 1993

Transesterification reaction between dimethyl phthalate and ethylene glycol was kinetically investigated in the presense of various metal nitrate catalysts at $170^{\circ}C$. The reaction rates measured by the amount of distilled methanol from the reaction vessel. The transesterification reaction was carried out under the first order conditions respect to the concentration of dimethyl phthalate and catalyst, respectively. The over all order was 2nd. By Arrhenius plot, the activation energy was calculated as 17.4kcal/mole and 17.2kcal/mole on the transesterification reaction with zinc nitrate and lead nitrate, respectively. Apparent rate constant, k' was appeared linear about concentration of catalyst.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.163-166
• /
• 1995

It was investigated the properties of TSC (Thermally Stimulated Current) to understand carriers behavior from long ago. Activation Energy of their properties is very important to verify electrical characteristics. So, for many years, many researchers were worked to get the activation energy, more compeletely. But, if boundary conditions were not satisfied, the values of activation energy contained several errors. In this work, to obtain the activation energy related to charged particles, the peak temperature Tp and the slope of tangential line on any coordinates of Arrhenius plot are applied. The calculation process can be denied with by computer, and the result of observation shows that the cures of calculation data and simulation data coincide very compeletely.

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.211-216
• /
• 2007

Rubber components are widely used in many application such as vibration isolators, damping, ride quality. Rubber spring is used in primary suspension system for railway vehicle. Characteristics and useful life prediction of rubber spring was very important in design procedure to assure the safety and reliability. Non-linear properties of rubber material which are described as strain energy function are important parameter to design and evaluate of rubber spring. These are determined by physical tests which are uniaxial tension, equi-biaxial tension and pure shear test. The computer simulation was executed to predict and evaluate the load capacity and stiffness for rubber spring. In order to investigate the useful life, the acceleration test were carried out. Acceleration test results changes as the threshold are used for assessment of the useful life and time to threshold value were plotted against reciprocal of absolute temperature to give the Arrhenius plot. By using the acceleration test, several useful life prediction for rubber spring were proposed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1204-1207
• /
• 2003

BiSrCaCuO superconducting thin films have been fabricated by co-deposition using IBS(ion Beam Sputtering) method. Despite setting the composition of thin film Bi2212 or Bi2223, in both cases, Bi2201, Bi2212 and Bi2223 phase were appeared. It was confirmed the obtained field of stabilizing phase was represented in the diagonal direction of the right below end in the Arrhenius plot of temperature of the substrate and $PO_3$, and it was distributed in the rezone.