• 한국음향학회지
• /
• 제21권8호
• /
• pp.686-694
• /
• 2002

본 논문은 다중경로 해양환경에서의 수중 음향을 이용한 수중 설치 선배열 수신기의 위치 추정 알고리즘을 제안한다. 위치 추정을 위한 음원과 수신기 사이의 다중경로에 따른 도달시간은 M-계열 송신 신호 및 정합필터를 사용하여 계산하였으며, 음원과 수신기 사이의 수평거리는 음선 이론에 모델을 사용하여 계산하였다. 또한 모의 실험 및 해상 실험 자료 분석을 통해 제안된 알고리즘을 검증하였다.

• 센서학회지
• /
• 제25권3호
• /
• pp.189-195
• /
• 2016

In this paper, we newly introduce a visible light communication (VLC) repeater using the LED array in an LED lamp. The LED array is used for a light source in the repeater, which radiates light both for illumination and data transmission. A VLC repeater is made by adding some electronic circuits to the LED array including a photodetector, a demodulator, and a modulator. The repeater is installed on the ceiling of a room like a conventional LED lamp, receives the VLC signal from an arbitrary transmitter, recovers data, and radiates the signal to wide area in the room. We used a carrier frequency of 100 kHz for the uplink from a transmitter to the repeater, and 500 kHz for the downlink from the repeater to a receiver. The repeater is useful for increasing the transmission path to wide area over the obstacles that may exist between VLC transmitters and receivers.

• 디지털산업정보학회논문지
• /
• 제13권3호
• /
• pp.75-81
• /
• 2017

This paper estimate a desired signal in a correlation wireless communication. The transmitted signal is mixed with the information signal, interference, and noise in wireless channel, and it is incident on the receiver. In this paper, we apply MUSIC algorithm and sub-array method to recover the total rank of the correlation matrix in order to estimation a desired signal among receiving signals. Through simulation, we analyze to compare the proposed method with the classical MUSIC algorithm. As a result of the simulation, the proposed method improved the resolution about 10degrees compared to the conventional MUSIC algorithm. We prove the superiority of the proposed method for the desired signal estimation in correlation channel.

• Journal of information and communication convergence engineering
• /
• 제18권4호
• /
• pp.254-259
• /
• 2020

Phased-array antennas comprise a demanding antenna design methodology for commercial wireless communication systems or military radar systems. In addition to these two important applications, the phased-array antennas can be used in beamforming for wireless charging. In this study, a four-way analog beamforming front-end module (FEM) for a hybrid beamforming system is developed for 2.4 GHz operation. In a hybrid beamforming scheme, an analog beamforming FEM in which the phase and amplitude of RF signal can be adjusted between the RF chain and phased-array antenna is required. With the beamforming and beam steering capability of the phased-array antennas, wireless RF power can be transmitted with high directivity to a designated receiver for wireless charging. The four-way analog beamforming FEM has a 32 dB gain dynamic range and a phase shifting range greater than 360°. The maximum output RF power of the four-way analog beamforming FEM is 40 dBm (=10 W) when combined the four individual RF paths are combined.

• 한국전자파학회논문지
• /
• 제30권3호
• /
• pp.195-201
• /
• 2019

위상배열 안테나는 개별 안테나의 위상을 제어함으로써 원하는 방향으로 빔 패턴을 형성할 수 있어 무선전력전송의 효율을 높이는데 효과적이다. 최적의 빔포밍을 통해 무선전력전송의 효율을 극대화하기 위해 송신기는 최적의 전송 경로를 인지해야 한다. 최적의 전파 경로 추정을 위해 일반적으로 송신기는 주기적으로 파일롯 신호를 전송하고 수신기는 이를 이용하여 최적의 경로에 해당되는 빔포밍 가중치를 계산하여 송신기로 피드백한다. 일반적으로 피드백 양이 안테나 수에 비례하여 증가하여 안테나 수가 많은 경우 피드백 오버헤드 문제가 대두된다. 본 논문에서 far-field approximation을 적용하여 피드백 양을 최소화하는 기법을 제안하고, 모의실험을 통해 간소화된 피드백 정보가 빔 패턴에 미치는 영향을 분석한다.

• The Journal of the Acoustical Society of Korea
• /
• 제22권2E호
• /
• pp.78-86
• /
• 2003

We analyzed the measured acoustic field to explore the characteristics of a horizontal coherence in shallow water. Signal spatial coherence data were obtained in the continental shelf off the east coast of Korea using a horizontal line array. The array was deployed on the bottom of 130 m water depth and a sound source was towed at 26 m depth in the source-receiver ranges of 1-13 ㎞. The source transmitted 200 ㎐ pure tone. Topography and temperature profiles along the source track were measured to investigate the relationship between the horizontal coherence and environment variations. The beam bearing disturbance and array signal gain degradation is examined as parameters of horizontal coherence. The results show that the bearing disturbance is about ± 8° and seems to be affected by temporal variations of temperature caused by internal waves. The array signal gains show degradation more than 5㏈ by the temporal and spatial variations of temperature and by the down-sloped topography.

• Journal of Astronomy and Space Sciences
• /
• 제27권4호
• /
• pp.345-352
• /
• 2010

Korea multi-purpose satellite-5 (KOMPSAT-5) is a low earth orbit (LEO) satellite scheduled to be launched in 2010. To satisfy the precision orbit determination (POD) requirement for a high resolution synthetic aperture radar image of KOMPSAT-5, KOMPSAT-5 has atmosphere occultation POD (AOPOD) system which consists of a space-borne dual frequency global positioning system (GPS) receiver and a laser retro reflector array. A space-borne dual frequency GPS receiver on a LEO satellite provides position data for the POD and radio occultation data for scientific applications. This paper describes an overview of AOPOD system and operation concepts of the radio occultation mission in KOMPSAT-5. We showed AOPOD system satisfies the requirements of KOMPSAT-5 in performance and stability.

• Journal of Positioning, Navigation, and Timing
• /
• 제13권2호
• /
• pp.149-158
• /
• 2024

Global Navigation Satellite System (GNSS) receivers are becoming increasingly sophisticated, equipped with advanced features and precise specifications, thus demanding efficient and high-performance hardware platforms. This paper presents the design and implementation of a Field-Programmable Gate Array (FPGA)-based GNSS receiver development platform for multi-band signal processing. This platform utilizes a FPGA to provide a flexible and re-configurable hardware environment, enabling real-time signal processing, position determination, and handling of large-scale data. Integrated signal processing of L/S bands enhances the performance and functionality of GNSS receivers. Key components such as the RF frontend, signal processing modules, and power management are designed to ensure optimal signal reception and processing, supporting multiple GNSS. The developed hardware platform enables real-time signal processing and position determination, supporting multiple GNSS systems, thereby contributing to the advancement of GNSS development and research.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 동계학술발표대회 논문집
• /
• pp.14-14
• /
• 2006

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2003년도 제8차 학술대회 초록집
• /
• pp.16-16
• /
• 2003

Purpose： Recently, a major interesting method of fast MR imaging is sensitivity encoding (SENSE) using arrays of multiple receiver coils. In this study, we have designed and implemented a 4-channel head array coil and optimized the structure and arrangement of the coil to improve the performance.