• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.287-296
• /
• 2016

Conventional maximum power point tracking (MPPT) methods are ineffective under partially shaded conditions because multiple local maximum can be exhibited on power-voltage characteristic curve. This study proposes an improved cuckoo search (ICS) MPPT method after investigating the cuckoo search (CS) algorithm applied in solving multiple MPPT. The algorithm eliminates the random step in the original CS algorithm, and the conception of low-power, high-power, normal and marked zones are introduced. The adaptive step adjustment is also realized according to the different stages of the nest position. This algorithm adopts the large step in low-power and marked zones to reduce search time, and a small step in high-power zone is used to improve search accuracy. Finally, simulation and experiment results indicate that the promoted ICS algorithm can immediately and accurately track the global maximum under partially shaded conditions, and the array output efficiency can be improved.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.164-170
• /
• 2014

A single near-field sounde source bearing and ranging method based on a independent doublet array is proposed. In the common case of bearing estimation method, unform linear array or uniform circular array are used. It is constrained retaining aperture because of array structure to estimate the distance of the sound source. Recent using independent doublet array sound source's bearing and distance esmtimation method is proposed by wide aperture. It is limited to the case doublets are located on a straight line. In this paper, we generalize the case and estimate the localization of a sound source in the various array structure. The proposed algorithm was verified performance through simulation.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1191-1194
• /
• 1998

This paper presents a new computationally efficient adaptive algorithm for blind signal separation, which is able to recover the narrowband source signals in the presence of cochannel interference without a prior knowledge of array manifold. We derive a new blind signal separation algorithm using the Natural gradient 〔1〕from an information-theoretic approach. The resulting algorithm has the Bussgang property which has been widely used in blind equalization 〔12〕. Extensive computer simulation results comfirm the validity and high performance of the proposed algorithm.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.218-227
• /
• 2011

The subject of variable step size maximum power point tracking (MPPT) algorithms has been addressed in the literature. However, most of the addressed algorithms tune the variable step size according to two variables: the photovoltaic (PV) array voltage ($V_{PV}$) and the PV array current ($I_{PV}$). Therefore, both the PV array current and voltage have to be measured. Recently, maximum power point trackers that arc based on a single variable ($I_{PV}$ or $V_{PV}$) have received a great deal of attention due to their simplicity and ease of implementation, when compared to other tracking techniques. In this paper, two methods have been proposed to design a variable step size MPPT algorithm using only a single current sensor for stand-alone battery storage PV systems. These methods utilize only the relationship between the PV array measured current and the converter duty cycle (D) to automatically adapt the step change in the duty cycle to reach the maximum power point (MPP) of the PV array. Detailed analyses and flowcharts of the proposed methods are included. Moreover, a comparison has been made between the proposed methods to investigate their performance in the transient and steady states. Finally, experimental results with field programmable gate arrays (FPGAs) are presented to verify the performance of the proposed methods.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.221-229
• /
• 2002

In thin paper, error tolerance of each array element which satisfies error tolerance of beam pattern is decided by using the Monte-Carlo method. Conventional deterministic method decides the error tolerance of each element from the acceptance pattern by testing all cases, but this method is not suitable for the analysis of large number of array elements because the computation resources increase exponentially as the number of array elements increases. To alleviate this problem, we applied new algorithm which reduces the increment of calculation time increased by the number of the array elements. We have validates the determined error tolerance region through several simulation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.131-139
• /
• 1989

This paper proposes Domino CMOS NOR-NOR Array Logic design method which has the same as characteristic of CMOS and Domino CMOS in Array Logic like PLA, good operation feature, high desity, easy test generation. This testable design method can detect all of faults in the circuit using simple additional circuit and solve the parasitic capacitance problem by improving the pull-down characteristics. A Test generation algorithm and test procedure using concept of PLA product term and personality matrix are proposed, and it was implemented in PASCAL language. This design method is verified by SPICE and P-SPICE simulation.

• Tribology and Lubricants
• /
• v.36 no.5
• /
• pp.290-296
• /
• 2020

When two layers of carbon nanotube (CNT) arrays are loaded to mate, the free ends of individual CNTs come into contact at the interface of the two layers. This leads to a higher contact resistance due to a smaller contact region. However, when the free CNT ends of one array penetrate into the mating array, the contact region increases, effectively lowering the contact resistance. To explore the penetration of mating CNTs, we perform molecular dynamic simulations of a simple unit cell model, incorporating four CNTs in the lower array layer coupled with a single moving CNT on the upper layer. The interaction with neighboring CNTs is modelled by long-range carbon bond order potential (LCBOP I). The model structure is optimized by energy minimization through the conjugate gradient method. A NVT ensemble is used for maintain a room temperature during simulation. The time integration is performed through the velocity-Verlet algorithm. A significant vibrational motion of CNTs is captured when penetration is not available, resulting in a specific vibration mode with a high frequency. Due to this vibrational behavior, the random behaviors of CNT motion for predicting the penetration are confirmed under the specific gap distances between CNTs. Thus, the probability of penetration is examined according to the gap distance between CNTs in the lower array and the aspect ratio of CNTs. The penetration is significantly affected by the vibration mode due to the van der Waals forces between CNTs.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.41-48
• /
• 2020

In this paper, we derive a common computational part in an algorithm that can simultaneously perform multiplication and square over finite fields, and propose a low-area bit-parallel systolic array that reduces hardware through sequential processing. The proposed systolic array has less space and area-time (AT) complexity than the existing related arrays. In detail, the proposed systolic array saves about 48% and 44% of Choi-Lee and Kim-Kim's systolic arrays in terms of area complexity, and about 74% and 44% in AT complexity. Therefore, the proposed systolic array is suitable for VLSI implementation and can be applied as a basic component in hardware constrained environment such as IoT.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.3
• /
• pp.237-246
• /
• 2013

This paper proposes a hydrophone array design optimization technique for cavitation tunnel noise measurements. The optimization technique comprises of design parameters, an objective function and an optimization algorithm. The design parameters are defined for circular, spiral and multi-spiral arrays. The objective function is defined so as to consider the mainlobe beamwidth and the maximum sidelobe level simultaneously. A global optimization scheme is applied to the array design using very fast simulated reannealing (VFSR). After applying the optimization technique to arrays respectively, the peak sidelobe level and the mainlobe beamwidth of optimum arrays are analyzed. Finally the array patterns considering multiple reflections in the cavitation tunnel are evaluated to validate the proposed method.

• The Journal of Korean Association of Computer Education
• /
• v.6 no.3
• /
• pp.47-56
• /
• 2003

We describe a new method for removing non-linear phased array antenna aberration called "squint" problem. To develop a compensation scheme. theoretical antenna and artificial neural networks were used. The purpose of using the artificial neural networks is to develop an antenna system model that represents the steering function of an actual array. The artificial neural networks are also used to implement an inverse model which when concatenated with the antenna or antenna model will correct the "squint" problem. Combining the actual steering function and the inverse model contained in the artificial neural network, alters the steering command to the antenna so that the antenna will point to the desired position instead of squinting. The use of an artificial neural network provides a method of producing a non-linear system that can correct antenna performance. This paper demonstrates the feasibility of generating an inverse steering algorithm with artificial neural networks.