• 대한전자공학회논문지TC
• /
• 제46권10호
• /
• pp.63-71
• /
• 2009

여러 가지 기판 두께에서 동작 주파수를 일정하게 유지하면서 좋은 방사 특성을 가지는 핀 배열을 가지는 패치 안테나에 대해 연구하였다. 수평방향으로의 방사를 최대로 억제시키는 핀 배열 패치 안테나의 패치 길이가 기판 두께가 증가함에 따라 작아짐을 볼 수 있었다. 핀 배열 패치 안테나는 기본 패치 안테나보다 수평방향으로의 방사가 크게 억제되고 전방방사 이득이 증가하며 후방방사는 감소함을 볼 수 있다. 또한 핀 배열 패치 안테나의 E-plane 방사 패턴의 Half-power beamwidth가 기본 패치 안테나보다 작아져 안테나의 지향성이 향상됨을 볼 수 있다.

• 한국전자파학회논문지
• /
• 제25권10호
• /
• pp.1077-1086
• /
• 2014

컨포멀 배열에 적용할 수 있는 곡선 배열안테나용 Rotman 렌즈의 설계 방법을 제안한다. 본 논문에서는 곡선 배열안테나와 연동하여 Rotman 렌즈의 평행판 영역에 존재하는 배열 포트의 위치와, 배열 포트와 배열안테나 소자를 연결하는 전송선의 길이를 구하는 설계식을 유도하고, 이 설계식을 바탕으로 빔 곡선 최적화 절차와 재초점 절차를 통하여 위상 오차를 최소화하고 있다. 제안된 설계식과 설계 절차에 의해 설계된 Rotman 렌즈는 정확히 3초점을 보유한 채 직선 배열안테나뿐만 아니라, 원곡선, 포물선, V자형 곡선 등의 오목하거나 볼록한 배열안테나를 급전할 수 있으며, 최소의 위상 오차를 나타내고 있다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권5호
• /
• pp.194-198
• /
• 2003

A wide-band E-plane notch phased array antenna having bandwidths of 3:1 and a scan volume of $\pm$ 45 is designed considering the active element pattern (AEP) with analysis of the full structure of E-plane notch phased array antenna. Using the numerical E-plane waveguide simulator as an infinite linear array in the broadside angle, the active reflection coefficient (ARC) of the unit element is optimized in the design frequency range. To evaluate the convergence of the AEP, the simulation of full array as changing the number array is investigated, and the minimum numbers of array that have characteristics similar to the AEP of an infinite array are determined.

• Journal of electromagnetic engineering and science
• /
• 제16권2호
• /
• pp.74-79
• /
• 2016

This paper proposes an optimum array configuration to improve null steering time for mobile controlled reception pattern antenna (CRPA) systems. The proposed array consists of a single reference element at the center and nine auxiliary elements arranged in a circular array. The array radius and the vertical positions of the center element are optimized using a genetic algorithm in conjunction with a constrained least-mean-square algorithm. The results demonstrate that the proposed array is suitable for mobile CRPA systems without significant side nulls in satellite directions.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권1호
• /
• pp.7-13
• /
• 2020

As a countermeasure against the threat of jamming which can disrupt operation of the Global Positioning System (GPS) receivers, various kinds of technique to estimate the Direction-Of-Arrivals (DOAs) of incoming jamming signals have been widely studied, and among them, the MUltiple SIgnal Classification (MUSIC) algorithm is known to provide very high resolution. However, since the previous studies regarding the MUSIC algorithm does not consider the orientation of each antenna element of antenna arrays, there is a possibility that DOA estimation performance degrades in the case of a misaligned antenna array whose antenna elements are not oriented along the same direction. As an effort to solve this problem, there exists a previous work which presents an MUSIC-based method for DOA estimation. However, the error between the real and measured values of each antenna orientation is not taken into consideration. Therefore, in this paper, the effect of the aforementioned error on the DOA estimation performance in the case of a misaligned antenna array is analyzed by simulations.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.285-289
• /
• 2002

본 논문에서는 중심주파수가 5.8㎓에서 동작하는 마이크로스트립 라인-프로브 급전구조를 갖는 마이크로스트립 패치 배열 안테나를 설계 및 제작하였다. 마이크로스트립 라인-프로브 급전구조는 안테나의 광대역 특성과 배열 구조를 가능하게 하여 이득을 향상시킬 수 있다. 그 결과, 대역폭은 17.6%(VSWR<2)이며, 안테나 이득은 8㏈i 를 얻었다.

• 한국IT서비스학회지
• /
• 제13권1호
• /
• pp.135-146
• /
• 2014

In this paper, an antenna has been proposed for the operation of mobile devices such as Zigbee. The presented rectenna operates at ISM (Industrial Scientific Medical) band of 2.45 GHz and consists of $2{\times}2$ array patch antenna and Villard voltage double rectifier circuit for high conversion efficiency. $2{\times}2$ array patch antenna is fabricated in FR4 substrate having thickness of 1.6mm and dielectric constant of 4.7. The proposed $2{\times}2$ array patch antenna resonates at 2.56GHz with return loss of 38.36dB, VSWR of 1.0244, and its impedance is matched to $50{\Omega}$. The fabricated rectenna has maximum conversion efficiency of 59.8% at an input power lever of 15dBm and load resistance of $500{\Omega}$.

• 한국군사과학기술학회지
• /
• 제13권2호
• /
• pp.313-319
• /
• 2010

GNSS receiver which uses the weak satellite signal is very vulnerable to the intentional jamming or non-intentional electromagnetic interference. One of the best method to overcome this disadvantage is to use an adaptive array antenna which has the capability of beamforming or nulling to the certain direction. In this paper, the performance of spatial adaptive null pattern control algorithm of 5 element array antenna is analyzed. A control algorithm which is designed in the 5 element array antenna is OPM(Output Power Minimization) which is eliminating the correlation characteristics between a reference antenna and the others. This algorithm can be applied effectively to the satellite navigation's CRPA because the satellite direction is not considered and GNSS signal power is below the thermal noise. The feature of the OPM algorithm is analyzed and the performance is compared with other null pattern control algorithm.

• 한국군사과학기술학회지
• /
• 제11권4호
• /
• pp.92-98
• /
• 2008

A beam steering system of X-band 2-D phased array antenna for radar application is developed. The beam steering system consists of real-time command generator, beam steering unit, control PCB of array module and power supply. It plays a role of beam steering and on-line check of phased array antenna. The performance of beam steering system is verified with pulse timing of current control in phase shifters and measurement of far-field of phased array antenna. The developed beam steering system offers basic technology to develop full-scale beam steering system of multi-function radar.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.605-608
• /
• 2003

In This paper, the 4$\times$4 microstrip patch array antenna for millimeter-wave is designed and fabricated. Before that, a patch antenna is designed to analyze the property in the millimeter-wave. Also, the excitation is implemented using edge and prove feeding. The array method is used to design the 2x1 array with corporate feeding network. Measured antenna shows 12.77 dBi gain, 37.65 GHz center frequency, -29.78 return loss and 680 MHz band width.