• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.60-67
• /
• 2001

The microscopic characteristics and cellulose structures of primary and secondary tissues in Pinus densiflora S. et Z. were examined. Cells of primary tissue in cross section showed an irregular arrangement and round shape. Fiber lengths were 200 to $250{\mu}m$ in primary tissue, and 1,500 to $1,600{\mu}m$ in secondary tissue. Cell diameters in primary tissue were larger than those in secondary tissue; 40 to $50{\mu}m$ in former and 10 to $20{\mu}m$ in latter. Crystallite width and d-spacing of (200) in both tissues did not show any significant differences. However, crystallinity indices by Segal's method showed significant differences as 23% in primary tissue and 35% in secondary tissue. In the orientation of cellulose microfibril, primary tissues had a random pattern, whereas, secondary tissues presented an oriented pattern with 20 to 30 degree. The cellulose crystalline of primary tissue was easily transformed into cellulose II by mercerization, but that of secondary tissue hardly transformed. It is considered that the difference of crystal transformation in both tissues could be caused by the difference of lignification.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.1-17
• /
• 2012

This study was carried out to propose the improved method by analyzing the change of green space arrangement and planting structure of apartment complexes in Seoul. 12 survey sites, which have obvious differences, were selected by reflecting the change of floor area ratio, underground parking place, and green space ratio. We divided the survey sites into four types that high green ratio(over 40%) apartment on natural ground, low green ratio(under 40%) apartment on natural ground, low green ratio(under 40%) apartment on artificial ground, and high green ratio(over 40%) apartment on artificial ground each period based on green space ratio and ground structure, plant crown volume, planting density, and planting pattern. The main factors of change of green space arrangement were green space ratio and ground structure. The Green space ratio was changed by the floor area ratio with constructing underground parking place and floor area ratio was adjusted by government policy and economic status. Average width of front green area has been changed from 10.0m in high green ratio apartment on natural ground for 3.5m, 2.7m, and 4.5m each period. The average width of the buffer green area has been changed from 15.0m in high green ratio apartment on natural ground of 7.7m, and 2.7m by extending parking place in the low green ratio apartment of artificial ground, so buffer green areas have been reduced and disconnected. So buffer green area in apartment complexes has been extended that the average width of the buffer green area was 3.8m caused by growing recognition of green since 2001. The ratio of native plant in canopy layer was increased from 45.1 % in the case of the high green ratio apartment of natural ground in 1980~1983 to 55.6%. Average plant crown volume increased from $1.27m^3/m^2$ in high green ratio apartment on natural ground for $3.47m^3/m^2$ in a low green ratio apartment on natural ground. But average plant crown volume is $0.27m^3/m^2$ in the high green ratio apartment of the artificial ground plant density of canopy layer was changed from 5 individuals per $100m^2$ to 14.5 individuals per $100m^2$. We should construct the buffer green area with natural ground and get the function of ecological and beautiful environment regarding to garden concept in case of front green area, width 4.5m. We should get the function of increasing green volume by multi-layer planting with shade woody species and flower woody species in case of back-side green area, width over 5.0m. We should get the function of covering the wall and increasing green landscape by planting with high woody species in case of side green area. We should apply the ecological planting technique to buffer green area and connect buffer green area to inner green area in apartment complexes.

• Journal of Bio-Environment Control
• /
• v.12 no.1
• /
• pp.45-53
• /
• 2003

The object of this study was to develop the control technology of daily integral photosynthetic photon flux (PPF) by the artificial lighting and shading screen in greenhouse. The shading time needed to get the target PPF by using two types of shading screens having shading ratio of 55% and 85% was analyzed. The results showed the shading ratio of screen to be installed in greenhouse should be different depending on the amount of target PPF to be controlled. The PPF control experiment by using the 55% shading screen in July and August showed that the maximum difference between measured and calculated value was about 5 mol$.$ $m^{-2}$ $.$ $d^{-1}$ in no shading condition. This difference is satisfactory result because the daily integral PPF is quite different depending on the weather condition. The simulation result about PPF distribution pattern shortened the time needed to find the proper arrangement of artificial lightings in greenhouse. But the further study was required to find the supplemental lighting arrangement to be able to provide the exactly uniform distribution of target light intensity. The supplemental irradiation time needed to acquire the target daily integral PPF for different supplemental light intensities, weather conditions, and months was analyzed. The result showed that the supplemental light intensity should be decided depending on the amount of target PPF to be controlled. The result of PPF control experiment conducted by using 55% shading screen and 300 $\mu$mol$.$ $m^{-2}$ $.$ $s^{-1}$ supplemental light intensity from the end of May to the beginning of June showed that the maximum difference between target and measured value was about 3 mol$.$ $d^{-1}$ $.$ $m^{-2}$ . If we consider that the difference of the daily integral PPF depending on weather condition was the maximum 30 mol$.$ $m^{-2}$ $.$ $d^{-l}$, the control effect was acceptable. Although the result of this study was the PPF control technology to grow lettuce, the data and control method obtained could be employed for other crop production.n.

• Journal of the Korean Society of Costume
• /
• v.60 no.4
• /
• pp.113-125
• /
• 2010

This study is purpose to trace a genealogy of Rainbow stripe in 30 ethnic costumes in East Asia. And with through comparative views between Korean and the other minority that is shown a bilateral relation of rainbow stripe in their costume, we make sure the unique character of rainbow stripe in Korean traditional costume. The stripe in the costumes was generally used on sleeves with 3~6 patches. There were 10 types of methods for making the stripe including sewing. Weaving and sewing with trimming was also frequently used either and the stripe by weaving with multicolored yarns were mostly found in the southern region of china. Black, blue and red were frequently used in the costume as a main color that was contrasted with rainbow stripe and especially, black was mostly used. Korean preferred bright colors as a main color. Contents of the genealogy of the multicolored stripe in ethnic costume in East Asia are followed. The 28 ethnic groups who used the stripe in their dress except Korean, the Mans, Mongo people and Tibetan were located in the southern region of East Asia. And the other ethnic groups distributed in the northwest and northeast region of East Asia. The distribution of the rainbow stripe in the costume could be grouped into two sections: the southern region people and Korean-the Mongol people-the Tus- the Zangs group. And the latter group was shown strong relation with the culture of Korean's rainbow stripe costume. 11 ethnic peoples including Korean, the Vis, the Miaos, the Tus, the Mongol people, the Chaoxians, the Zangs, the Lahus, the Jinuos, the Hanis, the Luobas and the Dulongs, were saliently used the stripe in their costume. The stripe in Japanese costume was judged that was not a kind of the rainbow stripe was shown the other ethnic groups, was a color arrangement by layered dress or geometrical pattern. From above, we could recap a particular characteristic of the rainbow stripe in Korean traditional costume. Many colors were used in the stripe and bodies than the other ethnic people and the color was bright. In many cases, a color of patch at the point of armhole was red and Black color was not used in the stripe. The width of patch was a relatively narrow and regular. It has shown that the rainbow stripe in Korean traditional costume was organized independently.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.5
• /
• pp.724-743
• /
• 2000

One of the biggest clinical problems of osseointegrated implant prosthesis is the excessive stress caused by bite forces which are transfered directly into the bone through the osseointegrated implant fixtures. So several biodynamic problems occur when there is an excessive fatigue stress. The factors of stress distribution are the number, kind, position, arrangement of the implants, and the distance between the implants, and the kind, quality of superstructure prosthesis and connection type between the rest implant and the superstructure. Recently, a distal short additional implant, socalled rest implant, is employed to reduced the stresses in conventional cantilevered prostheses. This study was undertaken to analyze the stresses transfered by osseointegrated implant cantilevered prostheses depending upon the number and the position of implants, the presence of rest implant, and the type of their connection. Three dimensional finite element analysis was attempted using ANSIS ver. 5.3 program under IBM INDIGO computer. The results were as follows : 1. The rest implant influenced on the pattern of stress distribution on the anterior area of the mandible and the superstructure. 2. In the group employing the rest implants, the fixed type of connection between the rest implant and the superstructure was more stable than the ball attachment type on the stress distribution. 3. In the group employing the ball attachment between the rest implant and the superstructure, the case with 4-implants(on canine, premolar) was little more stable than the case with 6-implants and the case with 4-implants(on incisor, premolar) on the stress distribution. 4. In the cantilevered group, the case with 4-implants(on incisor, premolar) and the case with 6-implants were more stable than the case with 4-implants(on canine, premolar) on the stress distribution. 5. In all of the group, the case with 6-implants and the fixed type of connection was the most stable and the case with 4-implants (on canine, premolar) was the most unstable on the stress distribution.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.178-199
• /
• 2011

The ancient tombs found in Bokcheon-dong, Busan originate from the time between the $4^{th}$ and $5^{th}$ centuries, the period of the Three Nations. They are known as the tombs where the Vertical Plate Armour was mainly buried. In 2006, two units of the Vertical Plate Armour were additionally investigated in the tombs No.164 and No.165 which had been constructed at the end of the eastern slope near the hill of the group of ancient tombs in Bokcheon-dong. Throughout this study, the contents of the two units of the Vertical Plate Armour, whose preservation process has been completed, have been arranged, while the group of constructed ancient tombs in Bokcheon-dong from the $4^{th}$ century has been observed through the consideration of the burial pattern. The units of the Vertical Plate Armour from the tombs No.164 and No.165 can be classified as the IIa-typed armor showing the Gyeongju and Ulsan patterns, according to the attribute of the manufacturing technology. Also, they can be chronologically recorded as those from the early period of Stage II among the three stages regarding the chronological recording of the Vertical Plate Armour. While more than two units of the Vertical Plate Armour were buried in the largesized tomb on the top of the hill of the group of ancient tombs, one unit of the Vertical Plate Armour was buried in the small-sized tomb. By considering such a trend, it can be said that in the stage of burying the armor showing the Gyeongju and Ulsan patterns (I-type and IIa-type), different units of the Vertical Plate Armour were buried according to the size of the tomb. However, as the armor showing the Busan pattern (IIb-type) was settled, only one unit was buried. Meanwhile, the tombs No.164 and No.165 can be included in the wooden chamber tomb showing the Gyeongju pattern, which is a slender rectangular wooden chamber tomb with the aspect ratio of more than 1:3. However, according to the trend shown by the buried earthenware, it can be said that there seem to be common types and patterns shared with the earthenware which has been found in the area of Gimhae and is called the one showing the Geumgwan Gaya pattern. In other words, there seem to be close relationships between the subject tombs and the tomb No.3 in Gujeong-dong and the tomb No.55 in Sara-ri, Gyeongju, regarding the types of armor and tombs and the arrangement of buried artifacts. However, the buried earthenware shows a relationship with the areas of Busan and Gimhae. By considering the combined trend of the Gyeongju and Gimhae elements found in one tomb, it is possible to assume that the group of constructed ancient tombs in Bokcheon-dong used to be actively related with both areas. It has been thought that the Vertical Plate Armour used to be the exclusive property of the upper hierarchy until now, since it was buried in the large-sized tomb located on the top of the hill of the group of ancient tombs in Bokcheondong. However, as shown in case of the tombs No.164 and No.165, it has been verified that the Vertical Plate Armour was also buried in the small-sized tomb in terms of such factors as locations, sizes, the amount of buried artifacts and the qualitative aspect. Therefore, it is impossible to discuss the hierarchical characteristic of the tomb just based on the buried units of the Vertical Plate Armour. Also, it is difficult to assume that armor used to symbolize the domination of the military forces. The hierarchical characteristic of the group of constructed ancient tombs in Bokcheon-dong from the $4^{th}$ century can be verified according to the location and size of each tomb. As are sult, the re seem to be some differences regarding the buried units of the vertical plate armour. However, it would be necessary to carry out amore multilateral examination in order to find out whether the burial of the vertical plate armour could be regarded as the artifact which symbolizes the status or class of the deceased.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.18-24
• /
• 2016

The purpose of this study is to induce the ductile behavior of the Ultra High Perfomance Concrete Reinforced I beam by substituting the part of steel fiber for bundle of reinforcing bars. Experiment of flexural behavior of the Ultra High Performance Concrete I shaped beam with the combination of the steel fiber and bundle of reinforcement bars was carried out. The volume fractions of steel fiber are 0%, 0.7%, 1%, 2%. The bundle of reinforcing bars and prestressing wire are used to restrain the concrete in compression zone. Length of bundle of reinforcing bar and prestressing wire is the one of test factors. The 9 Reinforced UHPC I shaped beam were made with these test factors. Not only steel fiber but also bundle of longitudinal reinforcing bar has effect to induce the ductile behavior of Reinforced UHPC I beam. The combination of 0.7% or 1.0% steel fiber and bundle of reinforcing bar showed the effective ductile behavior of I beam. The relationship of load-deflection and the crack pattern indicate the usefulness of the bundle of the longitudinal bar which has small diameter with close arrangement each other.

• Journal of the Korean Institute of Educational Facilities
• /
• v.26 no.4
• /
• pp.3-10
• /
• 2019

In school facilities, space is the basic framework. The structure and arrangement of space will provide the form and feel of school facilities. In order to become a high-quality school facility, it is necessary to focus on the educational, human and ecological aspects of the instructor and learner until the space is conceived, designed and completed. However, even when public education was introduced in the past, it did not become a school space considering this aspect. The school space, which focuses on efficiency and labor production, is a school space that reflects the characteristics of a factory-type school, which has been occupied by a large number until recently. Although efforts to improve the quality of school facilities have been attempted in recent years, there is also a need to pursue more active changes. Future-oriented and progressive school spaces include flexibility, connectivity, individualization, diversity(creativity). In other words, space should be flexible so that it can be used faithfully according to the educational situation, not the fixed and limited school space as in the past. In the future, the school space should be open and securely linked to the place where it is essential to complete community relations with the community. In addition, space should be flexible so that the school can meet the needs of each student as much as possible. And the school space should be transformed from the space design of the past fixed pattern to reflect the close relationship between spatial, psychological, physiological, and behavioral areas. When school space needs to shift away from the past and change in a new future-oriented direction, the remaining tasks should be presented with specific characteristics and content of the direction. And the function of the consignment should be handled by related research. Although the text of this study reveals the characteristics of future-oriented school space, more concrete and empirical research results should be presented by subsequent research at home and abroad. It is necessary to reduce trial and error in creating a future-oriented school space where both professors and learners can be satisfied by analyzing the common points and differences between the results of the study. In order to do this, it is necessary to make efforts to approach such research based on the participation of the subjects who teach and learn directly at the school site.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.139-148
• /
• 2015

The purpose of this paper is to induce the ductile behavior of the UHPFRC member after the peak load by using the bundle of longitudinal reinforcing bar as a substitute for steel fiber. Experiments on the flexural behavior of the Ultra High Performance Concrete rectangular beam with the combination of the steel fiber and longitudinal reinforcing bar were carried out. The volume fractions of steel fiber are 0%, 0.7%, 1%, 1.5%, 2% and the reinforcement ratios of longitudinal reinforcing bar which induce the ductile behavior are 0.0036, 0.016, 0.028 and 0.036. 15 UHPC beams were made with the combination of these test factors. Not only steel fiber but also bundle of longitudinal reinforcing bar has the effect to induce ductile behavior of UHPC structural member. The combination of 0.7% volume fraction of steel fiber and 0.028 reinforcement ratio showed the most economic combination. The relationship of load-deflection, strain variation of the concrete and the crack pattern indicate the usefulness of the bundle of the longitudinal bar which has small diameter with close arrangement each other.

• Journal of the Economic Geographical Society of Korea
• /
• v.13 no.3
• /
• pp.398-415
• /
• 2010

The purpose of this paper is to grasp levels of cost burden in pollution treatment by measuring efficiencies and shadow prices by pollutants in Korean cities. The efficiencies and shadow prices of pollutants will be compared for cities divided by Seoul metropolitan area and non-Seoul metropolitan area. Annual shadow prices of NOx, SOx, and PM10 emissions in the cities of Seoul metropolitan area are 0.846, 0.318, 0.816, respectively for 1999-2005. The annual shadow prices in the cities of Non-Seoul metropolitan area are 0.848, 0.272, and 0.789, respectively over the same periods. The shadow prices of SOx showed similar levels between two areas but those of NOx and PM10 of cities in Seoul metropolitan area were higher. NOx emission quantities of both areas have similar increasing patterns because the NOx has mainly increased with augmentation of transportation regardless of Seoul metropolitan and non-Seoul metropolitan areas. It seems that the reason the shadow prices of two pollutants for the cities of Seoul metropolitan area are higher, is because environmental regulation is stronger in the cities of Seoul metropolitan area, the cities of Seoul metropolitan relatively show higher quantities of pollution reduction under given desirable outputs, and generally have industrial sectors with small pollution emission. In the future we need to reduce pollutants in the various respects such as adjustment of overall industry structure, energy consumption pattern, and reviews of arrangement of living space for the cities located on the downward-sloping segment of production frontier.