• Journal of Welding and Joining
• /
• 제20권5호
• /
• pp.93-98
• /
• 2002

The effect of bonding misfit on single crystallization of transient liquid phase (TLP) bonded joints of single crystal superalloy CMSX-2 was investigated using MBF-80 insert metal. The bonding misfit was defined by (100) twist angle (rotating angle) at bonded interface. TLP bonding of specimens was carried out at 1523K for 1.8ks in vacuum. The post-bond heat treatment consisted of the solution and sequential two step aging treatment was conducted in the Ar atmosphere. The crystallographic orientation analysis across the TLP bonded joints was conducted three dimensionally using the electron back scattering pattern (EBSP) method. EBSP analyses f3r the bonded and post bonded heat treated specimens were conducted. All bonded joints had misorientation centering around the bonded interface for as-bonded and post-bond heat treated specimens with rotating angle. The average misorientation angle between both solid phases in bonded interlayer was almost identical to the rotating angle at bonded interface. HRTEM observation revealed that the atom arrangement of both solid phases in bonded interlayer was quite different across the bonded interface. It followed that grain boundary was formed in bonded interface. It was confirmed that epitaxial growth of the solid phase occurred from the base metal substrates during TLP bonding and single crystallization could not be achieved in joints with rotating angle.

• 한국경영과학회지
• /
• 제40권2호
• /
• pp.31-42
• /
• 2015

The purpose of airborne radars is to detect and identify approaching targets as early as possible. If the targets are identified as enemies, detection systems must provide defense systems with information of the targets to counter. Though many previous studies based on the detection theory of the target have shown various ways to derive detection probability of each radar, optimal arrangement of radars for effective detection, and determination of the search pattern, they did not reflect the fact that most military radar sites run multiple radars in order to increase the accuracy of identifications by radars. In this paper, we propose a model to analyze the probability of identification generated by the multiple radars using non-homogeneous absorbing markov chains. Our results are expected to help the military commanders counter the enemy targets effectively by using radars in a way to maximize the identification rate of targets.

• 제어로봇시스템학회논문지
• /
• 제12권10호
• /
• pp.968-974
• /
• 2006

We are moving into the era of ubiquitous computing. Ubiquitous Sensor Network (USN) is a base of such computing paradigm, where recognizing the identification and the position of objects is important. For the object identification, RFID tags are commonly used. For the object positioning, use of sensors such as laser and ultrasonic scanners is popular. Recently, there have been a few attempts to apply RFID technology in robot localization by replacing the sensors with RFID readers to achieve simpler and unified USN settings. However, RFID does not provide enough sensing accuracy for some USN applications such as robot navigation, mainly because of its inaccuracy in distance measurements. In this paper, we describe our approach on achieving accurate navigation using RFID. We solely rely on RFID mechanism for the localization by providing coordinate information through RFID tag installed floors. With the accurate positional information stored in the RFID tag, we complement coordinate errors accumulated during the wheel based robot navigation. We especially focus on how to distribute RFID tags (tag pattern) and how many to place (tag granularity) on the RFID tag-floor. To determine efficient tag granularities and tag patterns, we developed a simulation program. We define the error in navigation and use it to compare the effectiveness of the navigation. We analyze the simulation results to determine the efficient granularities and tag arrangement patterns that can improve the effectiveness of RFID navigation in general.

• Korean Chemical Engineering Research
• /
• 제62권2호
• /
• pp.191-199
• /
• 2024

A study was conducted on a tubular heat exchanger to improve its heat transfer rate by using a novel baffle plate design with discontinuous swirling patterns. The design consisted of perforated baffle plates with rectangular air deflectors positioned at varying angles. The tubes in the heat exchanger were arranged in a consistent alignment with the airflow direction and exposed to a uniform heat flux on their surfaces. Each baffle plate included sixteen deflectors inclined at the same angle and arranged in a clockwise pattern. This arrangement induced a swirling motion of the air inside a circular duct where the heated tubes were located, leading to increased turbulence and improved heat transfer on the tube surfaces. The spacing between the baffle plates was adjusted at different pitch ratios, and the Reynolds number was controlled within a range of 16,000 to 29,000. The effects of pitch ratios and inclination angles on the heat exchanger's performance were analyzed. The results indicated that using a baffle plate with rectangular deflectors inclined at 30° and a pitch ratio of 1.2 resulted in an average increase of 1.29 in the thermal enhancement factor.

• 한국동물위생학회지
• /
• 제44권4호
• /
• pp.299-303
• /
• 2021

A captive male polar bear (Ursus maritimus) was found dead after a long-term anorexia at a Park Zoo in Republic of Korea. At necropsy, the liver lesion was prominent with hepatomegaly carrying a big mass and numerous small nodules in various sizes. The cut surface of the nodules was creamy white, firm, and solid with umbilicated appearance. Histologically, there was proliferation of hepatocellular neoplastic cells arranged in glandular-like (pseudoglandular) pattern and complete loss of hepatocellular arrangement. The immunoreactivity for neoplastic hepatocyte antigens was positive for hepatocyte paraffin 1, and negative for vimentin, cytokeratin 7 and 19, and carcinoembryonic antigen. Based on those diagnostic features, the neoplasia was diagnosed as hepatocellular carcinoma. To the author's knowledge, this is the first case report of hepatocellular carcinoma in the captive polar bear in Republic of Korea.

• 식물분류학회지
• /
• 제39권2호
• /
• pp.100-106
• /
• 2009

한국산 대극속 3분류군에 대한 외부형태 형질과 학명을 재검토하였다. 줄기의 생장양상, 잎의 배열, 부속체의 유무, 자방 털의 유무, 종자의 형태 및 종부의 유무 등이 분류군들을 식별하는데 유용한 형질임이 확인되었다. 외부형태 형질, 기준표본 및 원기재문 등에 근거하여 낭독, 큰땅빈대 및 애기땅빈대의 정명은 E. fischeriana, E. hypericifolia 및 E. maculata로 밝혀졌으며, 정확한 종 동정을 위해 검색표를 제시하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.257-262
• /
• 2004

A series of preliminary model tests are performed to find out the wave attenuating effect of the pneumatic breakwater of environment friendly type, which is a bubble screen generated by releasing compressed air from a submerged multiple parallel manifold Rising bubbles induce vertical current, which produces horizontal currents flowing away from the bubble-screen area in both directions. Near bottom, the corresponding currents flow toward the bubble screen, thus completing the circulation pattern. The surface current moving against the direction of wave propagation causes some attenuation of the waves. It becomes more effective as the relative depth (d/ L) increases (short-period waves in deep water). With the same air-discharge, the multiple parallel manifold can be more effective for the attenuation of longer waves through optimum arrangement of manifold number. installation depth, manifold gap, etc. The pneumatic breakwater will give a wide utilization as a device for protecting harbor facilities and as a simple, mobile breakwater.

• 대한기계학회논문집
• /
• 제12권3호
• /
• pp.566-574
• /
• 1988

본 연구에서는 LDV의 수광계를 비임의 진행방향에 수직한 방향으로 위치시켜 분무액적에 의한 반사 산란성분을 수광하여 검출되는 신호의 가시도에 의해 액적크기 를 측정함과 동시에 도플러변화 주파수로부터 속도를 측정하고, 이 방법의 신뢰도를 충돌식 포진법에 의하여 측정한 결과와 비교하므로써 평가하여, 관측각 90˚의 측방 산란형 LDV에 의한 분무액적의 크기와 속도의 동시측정에 관한 유용성을 살펴보고자 한다.

• 한국지반신소재학회논문집
• /
• 제3권4호
• /
• pp.13-19
• /
• 2004

본 연구에서는 계단식 보강토 옹벽의 파괴메카니즘 연구를 위해 모형실험을 실시한 내용을 다루었다. 보강토옹벽의 모형실험은 성균관대학교 내의 지반시험장에 시험 시공한 계단식보강토옹벽의 원형을 축소하여 모사하였으며, 상사법칙을 이용하여 보강통옹벽에 사용된 재료의 크기 및 물성치를 원형에 가깝도록 축소하여 파괴메카니즘 분석에 신뢰성을 높였다. 또한 파괴메카니즘 분석을 위해 종전의 재하실험 방식과는 달리 자중에 의한 파괴가 가능해짐으로써 원형에 가까운 파괴 형상을 모사 할 수 있었다. 모형 실험의 내용으로는 보강토옹벽의 영향인자라고 할 수 있는 이격거리의 변화 및 보강재 길이변화에 따른 파괴 양상을 분석하였다.

• Earthquakes and Structures
• /
• 제2권4호
• /
• pp.337-356
• /
• 2011

In this paper, cable-stayed bridges with single pylon and two equal side spans, with variations in geometry and span ranging from 120 m to 240 m have been studied. 3D models of the bridges considered in this study have been analysed using ANSYS. As the first step towards a detailed seismic analysis, free vibration response of different geometries is studied for their mode shapes and frequencies. Typical pattern of free vibration responses in different frequencies with change in geometry is observed. Further, three different seismic loading histories are chosen with various characteristics to find the structural response of different geometries under seismic loading. Effect of variation in pylon shape, cable arrangement with variation in span is found to have typical characteristics with different structural response under seismic loading. From the study, it is observed that the structural response is very much dependent on the geometry of the cable-stayed bridge and the characteristics of the seismic loading as well. Further, structural responses obtained from the study would help the design engineers to take decisions on geometric shapes of the bridges to be constructed in seismic prone zones.