• 치과방사선
• /
• 제10권1호
• /
• pp.9-14
• /
• 1980

The author studied on the effects of X-ray irradiation to the development of periodontal ligament in gestation rats. They were irradiated in their abdomen with 100, 200 and 300 rads respectively in one shot irradiation with deep radiation therapy equipment (MAXIMAR 250-Ⅲ), In 7th, 14th, 21th and 28th day after delivery, those new born rats were respectively sacrificed with ether anesthesia and removed of their mandibles. After removal, those mandibles were fixed in 10% neutral buffer formalin, decalcified with 5% trichloroacetic acid for 5 days and embedded with paraffine. Staining was performed with H-E, Van Gieson, Mallory azan, Bielshowsky-Gomori silver stain and Halmi's oxytalan fiber stain. The results were as follows: 1. Before tooth eruption, all the fiber: components in dental sac were almost always oriented near the outer enamel epithelial \layer. But in irradiated new born rats, those collagen fiber orientation was more irregular than those of control groups, and this phenomenon was more severe in proportion to the amount of irradiation in the gestation period. 2. Before tooth eruption, the connective tissue fibers in periodontal ligament were stained with lighter in the irradiated groups than those of control groups. Oxytalan fibers of irradiated groups were thin and splitting pattern of their fiber morphology to compare with those of control groups. 3. After tooth eruption, the periodontal ligament fibers of irradiated groups were oriented functionally and their morphology was thick, fine and heavy staining. Oxytalan fibers were revealed with oblique parallel arrangement in the periodontal ligament of irradiated groups.

• 한국군사과학기술학회지
• /
• 제17권5호
• /
• pp.591-603
• /
• 2014

In this paper, we have described the characteristics of the Underwater Distributed Sensor Network (UDSN) and proposed the conceptual design guideline by an effectiveness analysis. To perform the effectiveness analysis, we defined an battlefield environment, and then analyzed principal components which compose the UDSN to find out simulation parameters and system constraints. We have chosen a measure of effectiveness based on a target trajectory, which could enhance intuitive understanding about current status, and performed various simulations to reveal critical design parameters in terms of sensor node types, arrangement, cost and combination of detection information.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.228-233
• /
• 2000

An experimental study has been performed regarding heat and mass transfer in a falling film absorber of domestic small-sized absorption chiller/heater. Components were concentrically arranged in cylindrical form : from the center, with a series of low temperature generator, absorber and evaporator. The arrangement of such helical-typed heat exchangers allows to make the system more compact as compared to conventional one. Experimental measurements were conducted with a helical absorber using $LiBr+LiI+LiNO_3+LiCl$ and LiBr solutions. As a result, the heat and mass flux performance of $LiBr+LiI+LiNO_3+LiCl$ solution shows the tendency of $2{\sim}5%$ increase. Therefore, $LiBr+LiI+LiNO_3+LiCl$ solution can be taken consideration into applying to small-sized absorption chiller/heater because of using without crystal through high concentration as 4wt% comparing with LiBr solution.

• 한국실내디자인학회논문집
• /
• 제22권5호
• /
• pp.143-151
• /
• 2013

As we recognize the space, humans will experience a process to synthesize elements of cognitive various methods, come to understand the environment. It is intended that on humans to recognize the space, it is intended to act directly under study how to recognize. Humans can know that the determining action based on the values and physical condition, based on the space in which they have been recognized, there are differences in the behavior of the human as a result. Social and arrangement of components - physical region that is cultural difficulties constitute experience specific areas therein. Space for human activities and human, can know that it is not a memory of human behavior, to have a closer relationship with human perception. That is, the description will be aware of the space via the perceptual phenomenon of man due to physical elements performed in the space, what acts about what happens. Through an understanding of the potential for this, and emotion space production consisting only of physical visual element future, and use act of the area to be expressed from his recognition, through the expansion of the perceptual elements, diverse experience richer and more it is a case where deemed necessary access space configuration capable of a broad depth study of this portion is happening, in order to constitute a space, a new interpretation for human behavior is progressing.

• 대한기계학회논문집B
• /
• 제31권3호
• /
• pp.256-263
• /
• 2007

The purpose of this study is to investigate the cooling performance of heat sinks for an electronic telecommunication system by adequate natural convection. Heat generation rates of electronic components and the temperature distributions of heat sinks and surrounding air are analyzed experimentally and numerically. In order to perform the heat transfer analysis for the thermal design of telecommunication system a program is developed. The program used the graphic user interface environment to determine the arrangement of heat sources, interior fan capacity, and heat sink configuration. The simulation results showed that the heat sinks were able to achieve a cooling capacity of up to 230W at the maximum temperature difference of $19^{\circ}C$. To verify the results from the numerical simulation, an experiment was conducted under the same condition as the numerical simulation, and their results were compared. The design program gave good prediction of the effects of various parameters involved in the design of a heat sinks for an electronic telecommunication system.

• 한국측량학회지
• /
• 제35권2호
• /
• pp.91-102
• /
• 2017

Backpack-mounted mapping system is firstly introduced for flexible movement in indoor spaces where satellite-based localization is not available. With the achieved advances in miniaturization and weight reduction, use of LiDAR (Light Detection and Ranging) sensors in mobile platforms has been increasing, and indeed, they have provided high-precision information on indoor environments and their surroundings. Previous research on the development of backpack-mounted mapping systems, has concentrated mostly on the improvement of data processing methods or algorithms, whereas practical system components have been determined empirically. Thus, in the present study, a simulator for a LiDAR sensor (Velodyne VLP-16), was developed for comparison of the effects of diverse conditions on the backpack system and its operation. The simulated data was analyzed by visual inspection and comparison of the data sets' statistics, which differed according to the LiDAR arrangement and moving speed. Also, the data was used as input to a point-cloud registration algorithm, ICP (Iterative Closest Point), to validate its applicability as pre-analysis data. In fact, the results indicated centimeter-level accuracy, thus demonstrating the potentials of simulation data to be utilized as a tool for performance comparison of pointdata processing methods.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.248-261
• /
• 1999

The fatigue life of mechanical components and structures has been influenced by mechanical, material and environmental conditions. It is important to search out the load type and size for accurate cause of fracture at the damaged surface of material. The fractographic method by x-ray diffraction can utilize residual stress $\sigma$_r and half-value breadth B and find out the types and the mechanical conditions of fracture. This study showed the relationship between fracture mechanical parameters $\Delta$K, $K_{max}$ and X-ray residual stress $\sigma$_r for normalized SS41 steel with homogeneous crystal structure and M.E.F. dual phase steel(martensite encapsulated islands of ferrite). The fatigue crack propagation tests were carried out under stress ratios 0.1 and 0.5. The x-ray diffraction technique according to crack propatation direction was applied to fatigue fractured surface. Residual stress $\sigma$_r was independent on stress ratios by arrangement of $\Delta$K. The equation of $\sigma$_r$\Delta$K was established by the experimental data. Therefore, fracture mechanical parameters can be estimated can be estimated by the measurement of X-ray parameters.

• 설비공학논문집
• /
• 제17권2호
• /
• pp.156-164
• /
• 2005

A comparative analysis of an ice storage system has been performed on the operation cost for the four control strategies, i.e., chiller priority and chiller downstream, chiller priority and chiller upstream, storage priority and chiller upstream, storage priority and chiller downstream. Main components of the ice storage system are an ice-on-coil storage tank and a screw compressor chiller. With the simulation program, the operation cost has been evaluated from the economics of an ice storage system. It is found that the operation cost of the ice storage system is strongly dependent on the control strategy, i.e., chiller priority or storage priority, but less affected by the arrangement method, i.e., chiller upstream or chiller downstream. In case of the maximum load day, the control strategy with chiller priority and chiller upstream is supposed to obtain the reduction of operation cost. However, it is found that the control strategy with storage priority and chiller downstream is the best economical operation for most summer seasons except the maximum load day.

• Journal of Ginseng Research
• /
• 제13권1호
• /
• pp.71-78
• /
• 1989

인삼과실의 발달에 따른 과피의 구조적 변화를 광학 및 전자현미경으로 관찰하였다. 인삼과피는 크게 외과피, 중과피 및 내과피로 구분되었으며 외과피는 큐티클로 덮혀있는 단층표피와 하표피층으로 구성되었다. 외과피와 중과피층은 세포질의 대부분을 액포가 차지하고 있었고 세포의 배열이 불규칙적이었으며 분화가 진행될수록 세포벽의 용해가 일어나는 등 세포의 퇴화현상이 관찰되었다. 내과피 세포는 이차세포벽의 비후와 목질화 현상으로 다른 층과 쉽게 구별이 되었으며 이는 기계적인 보강조직으로의 분화라고 사료된다. Golgi comples와 조면소포체에서 생성되는 분비물질들을 세포벽에 축적되는데 이는 내과피가 종피로 분화될 때 종피의 주요 구성물질을 이루는 것으로 사료된다.

• Journal of Ginseng Research
• /
• 제9권2호
• /
• pp.256-263
• /
• 1985

In order to investigate the inferior factor of red ginseng quality, the contents of various chemical components, physico-chemical properties and arrangement state of ginseng cells were observed. Contents of total reducing sugar, reducing sugar, crude protein, crude fibre and specific gravity of inside white part of red ginseng were less than those of normal part. But differences in content of crude saponin, HPLC pattern of ginsenosides and reducing ability for DP P H(1,1-dipheny 1-2-picrylhydrazyl) between normal and inside white part of red ginseng were not found. The optical density of 1 water extract of normal part of red ginseng did not differ from that of inside white 1 part of red ginseng, but the visible and UV absorbance of acid hydrolyzate of normal red ginseng showed higher than those of inside white part of red ginseng. The differences in the internal color and tissue of normal and inside white part of red ginseng were easily found with naked eye, and by the microscopic fractography, the orangement state of ginseng cell in the inside white part of red ginseng was less dense than that in normal red ginseng.