• 한국환경과학회지
• /
• 제11권1호
• /
• pp.1-14
• /
• 2002

This study was conducted to compare protected areas of South and North Korea based on international conservation criteria and recommend new fundamental directions for nature conservation policy. International conservation criteria used by this research were the 1994 IUCN protected area categories, composed of 6 management categories. Despite a variety of types and names of protected areas created by different domestic legislations, South Korea was revealed to have only two types of protected areas, Category IV and V, indicating the significant lack of ecological diversity and representativeness in its protected area system. Shockingly, there are no national parks meeting IUCN criteria in South Korea. On the other hand, North Korea has three IUCN Categories of II, III, IV and thus more balanced and ecologically representative protected area network than South Korea. Especially, North Korea maintains 9 national parks to be officially recognized by IUCN and UN. However, both South and North Korea should make sincere effort to have new and well-designed protected area system including all IUCN Categories I -Ⅵ and particularly a minimum area in the stricter protected area categories.

• 농촌지도와개발
• /
• 제19권3호
• /
• pp.673-697
• /
• 2012

The purpose of this study was to describe the policies and outlooks of the green jobs including the forest area. The Methodology of the study was mainly on literature review and second data used and analyzed to get the result. The findings of the study was the manpower of Green Jobs was 2.5% in 2009, it should be expected to 2.9 percent in 2016, and overall of the green jobs and forest area of the outlooks should be increased from 46 percent to 56 percent in each sector of green and forest area. The climate changes and environmental pollutions would push the conditions of new green jobs in forest area as well as waste-based industry. The suggestions were made based on the study of which one is policy-making should be prepared for creating Green Jobs and the forest area.

• 드라이브 ㆍ 컨트롤
• /
• 제13권4호
• /
• pp.14-22
• /
• 2016

This paper presents a stochastic and predictive working-risk-assessment algorithm for excavators based on a one-layer laser scanner. The one-layer laser scanner is employed to detect objects and to estimate an object's dynamic behaviors such as the position, velocity, heading angle, and heading rate. To estimate the state variables, extended and linear Kalman filters are applied in consideration of laser-scanner information as the measurements. The excavator's working area is derived based on a kinematic analysis of the excavator's working parts. With the estimated dynamic behaviors and the kinematic analysis of the excavator's working parts, an object's behavior and the excavator's working area such as the maximum, actual, and predicted areas are computed for a working risk assessment. The four working-risk levels are defined using the predicted behavior and the working area, and the intersection-area-based quantitative-risk level has been computed. An actual test-data-based performance evaluation of the designed stochastic and predictive risk-assessment algorithm is conducted using a typical working scenario. The results show that the algorithm can evaluate the working-risk levels of the excavator during its operation.

• 한국환경생태학회지
• /
• 제38권1호
• /
• pp.79-89
• /
• 2024

본 연구는 국립공원계획 타당성검토의 구역조정 기준과 방법을 한려해상국립공원에 적용하여 평가 하는 것을 목적으로 하였다. 구역조정 대상지 도출에 이용되는 생태기반평가 결과 편입 검토가 가능한 생태기반평가 I등급은 10.0%, II등급 40.4%로 분석되었다. 해제 검토가 가능한 V등급은 9.9%이었다. 편입 및 해제 적합성 평가 결과 편입대상 면적은 35.150km²(육상 3.669km², 해상 31.481km²)이었고 해제 대상 면적은 육상 0.071km²이었다. 지자체와 지역주민이 공익상 또는 주민편의를 위해 공원구역 해제를 요구하는 곳에서는 총 면적이 변화되지 않는 범위 내에서 해제 검토가 가능하며, 이것을 상호교환이라 한다. 상호교환에 의해 결정된 해제 면적은 10.386km²이었다. 이것은 해제 적합성 평가에 의해 도출된 면적의 146배에 달했다. 상호교환으로 해제되는 지역을 생태기반평가와 매칭한 결과 해제를 절대 할 수 없는 I,II등급에 해당하는 곳이 70.6%(7.321km²) 이었다. 결과적으로 한려해상국립공원 타당성검토의 구역조정은 생태기반평가나 해제 적합성 평가 결과가 매우 제한적으로 적용되었음을 알 수 있었다. 또한 상호교환이 국립공원 계획 타당성검토 중 구역조정의 핵심이었다.

• 대한건축학회논문집:계획계
• /
• 제34권3호
• /
• pp.129-138
• /
• 2018

The purpose of this study is to analyze the daily living area of the elderly using the vast amount of travel route data collected through smart phones. In order to analyze the utilization status of the elderly into the visiting area and the living area, the subway station influence area was typed based on the number and ratio of the elderly visiting and the elderly living there. The characteristics of the elderly visiting area and the living area of the subway station area were derived by analyzing the walking route data for the three types of subway station influence areas where the elderly visit and live. First, we derive the range of visiting area and living area of the elderly near the subway station. Second, we derive the characteristic of moving distance which causes the linked walking of the elderly. Third, destination distribution and facility utilization are influenced by the subject of use, movement pattern, and facility awareness.

• Journal of Biosystems Engineering
• /
• 제5권1호
• /
• pp.15-23
• /
• 1980

Natural-air drying systems have been extensively used for cereal grains, and many researches on the systems have been conducted in foreign countries. However, little research on drying rough rice with natural air has been done. Especially . little research on natural air drying of rough rice based on weather data has been done in Korean. The objective of this study was to present fundamental data for estimating optimum requirements and basic information available for natural air drying of rough rice based on the weather data . The weather data analyzed in this study were the 10-year (1969 to 1978) record of air temperatures, wet-bulb temperatures and relative humidities, which were three-hourly observations in Taegu area. The results of this study are summarized as follows ; 1 From the results of weather data analysis the average air temperature was about $14.8^\circ$and the average relative humidty 67.5% . Average equilibrium moisture content appeared to be 13.8 percent on wet basis, which showed great potential for natural air drying in Taegue area in October. 2. Possible fan operation time based on the equilibrium moisture content of 15% on wet basis was about 14 hours a day during October in Taegu area. Probabilities of possible drying days based on minimum time available for drying in a day were analyzed. 3. Minimum air flow requirements based on the worst year were determined for different fan operation methods and initial moisture contents.

• 한국조경학회지
• /
• 제30권6호
• /
• pp.66-78
• /
• 2003

The purpose of this study was to minimize the forest disturbance around an entry road of a power transmission tower construction site between Taean and Sinsesan, Chungnam. The main study field was classified into existing materials and a GIS, remote sensing analysis, and a field examination. This information was used to identify the most suitable entry road using a degree of green naturality map, eco-naturality map, actual vegetation map, and a forest state map as the existing materials. Also, the study used an normalized difference vegetation index, altitude and slope map in order to make the evaluation materials which used an remote sensing image, and GIS. This data was used to choose an optimum area, and diagnosed the current condition of the vegetation with a field survey of the area. It analyzed vegetation structure, species diversity, the age of trees in a field examination. Subsequently, we proposed four area types based on the analysis results--preservation area, transplantation area, restoration area and development area. As a result, the preservation area was categorized into 8 grades, according to the degree of green naturality, large area of breast diameter at Pinus densiflora community, competition area of Pinus densiflora and Quercus spp. and Quercus spp. community of over 20 years old. A transplantation area established 46 optimum areas according to the GIS analysis and vegetation investigation results. Vegetation restoration plan for disturbance area should be made based on ecological value of existing vegetation to worthwhile area as Quercus spp. mixing forest proposed. The development area selected a ecological worthless place as an artificial forest where Pinus densiflora and Pinus thunbergii growth is poor. This research results suggest that restoration of vegetation will be possible in the real world. Also, ecological restoration guidelines will be made through building and analyzing data base and routine monitoring of transplantation and restoration area.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.636-639
• /
• 2007

The frequently flooded area has been known as very vulnerable area. This area has nature disasters such as typhoon, storm and flood almost every year. The purpose of this study is to develop a management system for frequently flooded area by Web based. So this system is possible to disaster management which irrespective of time and place. Through this system, general user can easily retrieve status information and obtain that in visual way such as maps. graph, and texts if they have only certain web browsers.

• 한국컴퓨터산업학회논문지
• /
• 제6권2호
• /
• pp.265-270
• /
• 2005

히스토그램은 컬러공간의 특징 때문에 조명에 매우 민감하며, 이동된 빛의 강도를 가지고 있을때 유사성을 떨어뜨릴 가능성이 커지기 때문에, 본 논문에서는 히스토그램의 영역을 몇 개의 영역으로, 나눠, 그 영역들을 계산하는 HAC(Histogram Area Calculation)라 불리는 새로운 검색 방법을 소개한다. 제안한 방식은 현재 히스토그램이 가지고 있는 특성에 기반하여 히스토그램의 영역을 계산하고, 유사성을 매칭시킴으로써 명암도 변화에 대해서, 기존의 다른 전통적인 히스토그램 방법이나, 병합된 히스토그램 방법보다 제안한 방식의 성능이 훨씬 뛰어나다는 것을 보여준다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.343-346
• /
• 2003

In order to construct the extrusion die surface of arbitrarily shaped sections, an automatic surface construction method based on NURBS surface and area mapping method is proposed in the present work. In the present study, a center point for area mapping is determined by introducing the marring concept based on constant area proportionality between original billet and final product. The characteristic points of inlet profile is determined using the traditional area mapping method and the root finding numerical method. The inlet and outlet profiles are precisely described with NURBS curves using the characteristic points of entry and exit sections. For the construction of NURBS surface, an interpolation method for the pre-determined two section curves has been developed to be used in the generation of interior control points and weights. To show the validity of the proposed method, automatic die surface generation is carried out for the several kinds of shaped sections.