• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1379-1382
• /
• 2009

The 3D display has been used in optical projection technology to connect twenty mini- projectors with seamless image tiling. In this way, we can improve the projected resolution by reducing each project screen and increase projected area by connect several mini-projectors. In this article, the illumination system uses the LED light source, non- telecentric structure and LCOS panel, and it's total length is less than 10 centimeter. It can build a seamless large display by tiling multiple projectors.

• Journal of Platform Technology
• /
• v.10 no.3
• /
• pp.60-68
• /
• 2022

As AI-technology develops, interest in the safety of autonomous driving is increasing. Recently, autonomous vehicles have been increasing, but efforts to solve side effects have been sluggish. In particular, night autonomous vehicles have more problems. This is because the probability of accidents is higher in the night driving environment than in the day environment. There are more factors to consider for self-driving at night. Among these factors, reflection of light or reflected light of lighting may be a fundamental cause of night accidents. Therefore, this study proposes method to reduce accidents and improve safety by reducing reflected light generated by the headlights of opposite vehicles or various surrounding light that appear as an important problem in night autonomous vehicles. Therefore, first, in an image obtained by a sensor of a night autonomous vehicle, illumination reflected light is extracted using reflected light characteristic information, and a color of each pixel using a reflection coefficient is found to reduce a special area generated by geometric characteristics. In addition, we find a new area using only the brightness component of the specular area, define it as Illuminated Reflection Light (IRL), and finally present a method to reduce it. Although the illumination reflection light could not be completely reduce, generally satisfactory results could be obtained. Therefore, it is believed that the proposed study can reduce casualties by solving the problems of night autonomous driving and improving safety.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.3
• /
• pp.113-124
• /
• 2009

This study has attempted to calculate the intensity of illumination for the optimal growth environment of indoor plants after analyzing both damage to plant species and growth conditions as impacted by light conditions for the Kyobo Life Insurance greenhouse. The optical intensity of illumination has been estimated after investigating the problems of growth conditions based on an analysis of illumination by light condition, dead tree replacement cycle(weeks) and rate of damage of plant species. According to the investigation of illumination, the lowest difference was observed between the shaded spot in the south(531lux) and the sunny spot(602lux) while the largest difference(nearly 500lux) was detected between the shaded spot in the central area(210lux) and the sunny spot(782lux). According to an analysis of dead trees from 1990 to 2004, in terms of dead tree replacement cycle, Viburnum awabuki was the highest(161weeks), followed by Phyllostachys spp.(84weeks), Camellia japonica and Ternstroemia japonica(40weeks). Regardless of plant species, damage rate of plant were lower in the shaded spot and higher in the sunny spot. According to correlation and regression analyses with the intensity of illumination as an independent variable and the damage rate of plant species as a dependent variable, the damage rate of plant species increased as the intensity of illumination decreased. A dramatic decline in the rate of damage was observed at $500{\sim}600lux$. At 700lux, it reached the lowest level.

• Journal of the Korea Computer Graphics Society
• /
• v.22 no.3
• /
• pp.89-99
• /
• 2016

One of the fundamental elements in developing mixed reality applications is to effectively analyze and apply the environmental lighting information to image synthesis. In particular, interactive applications require to process dynamically varying lighting sources in real-time, reflecting them properly in rendering results. Previous related works are not often appropriate for this because they are usually designed to synthesize photorealistic images, generating too many, often exponentially increasing, light sources or having too heavy a computational complexity. In this paper, we present a fast light source estimation technique that aims to search for primary light sources on the fly from a sequence of video images taken by a camera equipped with a fisheye lens. In contrast to previous methods, our technique can adust the number of found light sources approximately to the size that a user specifies. Thus, it can be effectively used in Phong-illumination-model-based direct illumination or soft shadow generation through light sampling over area lights.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.1
• /
• pp.35-41
• /
• 2017

This study looks at optimizinge light redistribution to improve the overall illuminance uniformity of commercial IRED modules. To obtain uniform illumination over a prescribed rectangular area, a freeform surface lens was evaluated using TracePro. The LED light overall illuminance uniformity regulated in KSC 7658 was verified using Relux software. Experimental test results showed 0.81 overall illuminance uniformity for rectangular light distribution of LED lights having a radiation angle of $80^{\circ}$. After fabricating prototype IRED lights based on these simulation results, illuminance performance was observed when used as actual IRED lighting with a nighttime CCTV system. Image observation photographs of the prototype $80^{\circ}$ rectangular IRED lights confirmed that object images can be seen clearly owing to high overall illuminance uniformity, and that dark regions of the CCTV screen were not shown.

• Journal of Applied Reliability
• /
• v.9 no.2
• /
• pp.131-148
• /
• 2009

An organic light emitting diode (OLED), also light emitting polymer (LEP) and organic electro luminescence (OEL), is any light emitting diode (LED) whose emissive electroluminescent layer is composed of a film of organic compounds. The layer usually contains a polymer substance that allows suitable organic compounds to be deposited. They are deposited in rows and columns onto a flat carrier by a simple "printing" process. The resulting matrix of pixels can emit light of different colors. Such systems can be used in television screens, computer displays, small, portable system screens such as cell phones and PDAs, advertising, information and indication. OLEDs can also be used in light sources for general space illumination, and large-area light-emitting elements. In this paper, we develop the general guide line of the accelerated life test for assuring B10 life of AMOLED(Active Matrix Organic Light Emitting Diode) and PMOLED(Passive Matrix Organic Light Emitting Diode) which are widely used for display monitor less than 115 mm.

• KIEAE Journal
• /
• v.14 no.6
• /
• pp.5-13
• /
• 2014

Various studies on lighting energy savings are conducted, given that lighting energy consumption accounts 23.5% of building energy consumption. Especially, external type light shelf's efficiency is acknowledged; however, its application is limited in Korea, where high rise building ratio is high, due to high wind pressure. This study delves into natural lighting system to cope with wind pressure, and proposes the punching plate-installed light shelf. This study actually draws lighting energy output, according to whether the punching plate is applied through the test-bed, and verifies the effectiveness of the punching plate-installed light shelf. The conclusion is presented below: First) The result of performance evaluation of light shelf with the punching plate in winter solstice showed that the awning area decreased as the opening ratio increased so that the indoor distributed illumination tended to increase, and $-40^{\circ}$ which was advantageous for awning was determined as the proper angle. Second) The light shelf with the punching plate in spring/autumn equinox shows improved lighting according to the angle, and the appropriate angle of light shelf with the punching plate has increased to $15^{\circ}$ and $20^{\circ}$ according to the opening ratio in comparison to $5^{\circ}C$ which is the appropriate angle of light shelf with no punching plate due to the reflection area reduced by the reflecting plate with holes. Third) The result of performance evaluation of light shelf with the punching plate in summer solstice showed that the lighting performance tended to decrease as the opening ratio increased. 4) The light shelf with the punching plate incurs a 50% energy loss in comparison to the light shelf with no punching plate. However, its effectiveness has been proven in the aspects that it can bring a 50% energy saving in comparison to the case with no installation of light shelf and that it can be designed in response to wind pressure on the high floors.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.93-100
• /
• 2005

Character and illuminance distribution of daylighting is very important for the architectural plan in museum. Those data show bases for exhibition space design with daylighting and play a decisive role in visual perception of articles and space aesthetic. The goal of this paper was therefore to analyze the illuminance distribution in fine art museum with 3 typical girdle skylight types which are devided according to the art of protection from glare. This Experiment proved that they had a striking contrast with regard to the ratio of daylight illumination and illuminance distribution in spite of the same purpose of those development. The girdle skylight with a translucent glass showed the strongest value of the ratio of daylight illumination, but inequable illuminance distribution in space, excepting the area of the wall. However, the latticed reflector of light refracted daylight in the direction of wall and made illuminance distribution very equable in whole space. The ratio of daylight illumination at the girdle skylight which was located at the verge of the ceiling, was highest at the upper part of the wall and was reduced gradually from there, by way of the middle and under part of the wall, to the center of space.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.1
• /
• pp.15-19
• /
• 2015

The depth information of an image is used in a variety of applications including 2D/3D conversion, multi-view extraction, modeling, depth keying, etc. There are various methods to acquire depth information, such as the method to use a stereo camera, the method to use the depth camera of flight time (TOF) method, the method to use 3D modeling software, the method to use 3D scanner and the method to use a structured light just like Microsoft's Kinect. In particular, the depth camera of TOF method measures the distance using infrared light, whereas TOF sensor depends on the sensitivity of optical light of an image sensor (CCD/CMOS). Thus, it is mandatory for the existing image sensors to get an infrared light image by bundling several pixels; these requirements generate a phenomenon to reduce the resolution of an image. This thesis proposed a measure to acquire a high-resolution image through gradual area movement while acquiring a low-resolution image through pixel bundling method. From this measure, one can obtain an effect of acquiring image information in which illumination intensity (lux) and resolution were improved without increasing the performance of an image sensor since the image resolution is not improved as resolving a low-illumination intensity (lux) in accordance with the gradual pixel bundling algorithm.

• Korean Journal of Ichthyology
• /
• v.26 no.3
• /
• pp.185-193
• /
• 2014

To find the influence of water temperature, tank color and illumination in feeding, growth and blind-side hypermelanosis of starry flounder, Platichthys stellatus, in the present study, we performed a series of temperature, background color and illumination intensity test for 180 days (From June to December). The test was done in duplicate at 100 fish/tank (430% of initial covering area [PCA]) with the selected ordinary juvenile flounder (TL $17.3{\pm}0.5cm$, BW $82.5{\pm}0.2g$). The rearing was performed in darkgreen FRP aquarium tanks ($H100cm{\times}L100cm{\times}W100cm$; bottom area $1m^2$) lighten with average 1,000 lux and 230 lux, and in white FRP aquarium tank ($H100cm{\times}L100cm{\times}W100cm$; bottom area $1m^2$) lighten with average 230 lux of light intensity. We investigated correlation of daily food intake (DFI) with water temperature and salinity, and compared the influences of background colors and light intensity in DFI, food efficiency (FE), growth, survival rate, and ratio of malpigmented blind-side area and ambicolored fish ratio. In DFI, although it was not related with salinity, the amount was significantly decreased under 0.5 g/fish/day in summer and winter season, but was significantly increased over 1.5 g/fish/day in autumn season showing from $10^{\circ}C$ to $20^{\circ}C$ in water temperature. In background and illumination test, DFI, FE and survival rate showed no difference among three groups. The ratios of malpigmented blind-side area and ambicolored fish were also not significantly different among three groups, indicating that the blind-side hypermelanosis of starry may be governed not by background color (or light intensity) but by a genetics external trait inherited from parents.