• 제목/요약/키워드: Area gap

검색결과 1,093건 처리시간 0.026초

금속선 강화에 따른 열 가압 도재의 파절저항 (The fracture resistance of heat pressed ceramics with wire reinforcement)

  • 조득원;동진근;오상천;김유리
    • 대한치과보철학회지
    • /
    • 제47권2호
    • /
    • pp.191-198
    • /
    • 2009
  • 연구목적: 본 연구는 높은 심미성을 나타내지만 낮은 파절 강도로 인하여 구치부에서의 사용이 제한되고 있는 전부도재 고정성 국소의치의 파절강도를 증가시키기 위한 방법으로, 취성 재료인 도재에 인장강도가 높은 금속선을 삽입하고 물리적, 기계적 성질을 알아보고자 하였다. 연구 재료 및 방법: lithium disilicate(ingot No.200 : IPS Empress 2, Ivoclar Vivadent, Lichtenstein)와 0.41 mm 직경의 Ni-Cr 금속선(Alfa Aesar, Johnson Matthey Company, USA)을 사용하여, 금속선의 수와 배열을 달리한 4개의 실험군 시편을 제작하였다. 모든 시편은 폭 4 mm, 두께 2 mm, 길이 15 mm의 직육면체로 제작하였다. 실험군 1, 2, 3은 각각 한 가닥, 두 가닥, 세 가닥의 금속선을 도재 시편의 장축을 따라 배열하였으며, 실험군 4는 세 가닥의 금속선을 도재 시편의 장축에, 다섯 가닥의 금속선을 도재 시편의 횡축에 배열하였다. 대조군에는 금속선을 삽입하지 않았으며, 대조군 및 각각의 실험군의 시편은 각 군당 12개로 하였다. 결과: 만능 시험기(Z020, Zwick, Germany)를 이용하여 파절시점까지 하중을 가한 후, 굴곡계수, 굴곡강도, 파절시점까지의 변형률, 파괴인성을 측정하였다. 파절된 시편의 도재와 금속선의 계면을 횡절단 및 연마하여 주사전자현미경(JSM-6360, JEOL, Japan)으로 100배상에서 관찰하였다. 결과는 다음과 같다. 1. 도재에 금속선을 삽입한 결과, 금속선을 삽입하지 않은 대조군에 비해 통계적 유의성 있는 굴곡계수 및 굴곡강도의 변화는 관찰할 수 없었으나, 변형률의 유의성 있는 증가(P<.001)를 관찰할 수 있었다. 2. 금속선을 삽입한 시편의 파절 양상은 하중점 부위에서 도재만 파절되는 양상을 나타내었다. 3. 금속선을 삽입한 도재의 파절된 시편을 횡절단 및 종절단하여 100 배상에서 주사전자현미경으로 촬영한 결과, 하중 시 도재의 파절 원인이 될 수 있는 도재 내부의 기포는 관찰되지 않았으며, 도재와 금속선 사이의 gap도 관찰되지 않았다. 결론: 금속선 삽입의 결과, 취성 재료인 도재의 통계적으로 유의성 있는 변형률의 증가를 관찰할 수 있었다. 그러나 구치부에서 금속선 강화 도재의 사용을 위해서는 굴곡계수 및 굴곡강도의 향상이 필요하다. 이를 위해서는 추가적 연구가 필요하다.

출산율은 삶의 질과 비례하는가? OECD 국가의 삶의 질 요인과 출산율의 관계에 관한 추이분석 (Is Fertility Rate Proportional to the Quality of Life? An Exploratory Analysis of the Relationship between Better Life Index (BLI) and Fertility Rate in OECD Countries)

  • 김경희;유승호;정희태;김혜영;박형준
    • 국제지역연구
    • /
    • 제22권1호
    • /
    • pp.215-235
    • /
    • 2018
  • 출산율 제고에 대한 정책적 고민은 OECD국가들의 공통된 관심사일 뿐 아니라 세계 최하위인 출산율을 기록하고 있는 한국의 최대 관심사이기도 하다. 많은 국가 예산을 투입해왔고 출산율 관련 여러 연구들이 진행되어 왔음에도 불구하고 한국의 출산율은 계속 감소 추세이다. 따라서 본 연구는 기존 출산율 연구에서 다루어져 왔던 출산율에 영향을 주는 세부적 요인들의 영향력 및 효과성 검증과 유럽 선진국가들의 사례를 통한 정책적 접근의 문제점을 인지하고 출산율과 삶의 질에 관한 거시적이고 구조적 접근을 통해 전체적 흐름을 다시 파악하고자 함에 그 목적이 있다. 즉 선진국의 높은 삶의 질은 출산율을 높이는지, 삶의 질과 출산율이 모두 높은 국가 모델은 어느 나라이며 그 나라의 출산에 대한 사회 및 정책적 흐름은 어떠한지를 살펴보았다. OECD국가들의 삶의 질 요인(BLI)와 CIA출산율 자료를 이용하여 분석한 결과, 삶의 질 수준이 높은 국가 중에도 출산율이 낮은 국가가 많다는 사실을 확인할 수 있었다. 그러나 삶의 질 수준과 출산율이 모두 높은 국가가 한국이 지향해야 할 국가 모델임을 인지하고 본 연구에서 새로 도출된 아이슬란드, 아일랜드, 뉴질랜드의 사례와 삶의 질 수준은 높지만 출산율이 낮은 독일의 사회적 특성을 비교해 본 결과 앞의 세 나라는 양성평등에 대한 인식 수준이 높게 나타났고 그 결과로 성별에 따른 임금 차이는 낮게 나타났음을 확인하였다. 반면에 독일의 경우는 성별에 따른 임금 불평등이 비교적 더 크게, 출산율은 더 낮게 나타남으로써 양성평등을 위한 인식전환이 출산율에 주요한 영향을 미치고 있음을 확인했다. 부모- 자식 간의 '상승관계(synergy)' 에 기초하여 가정 및 노동시장에서 양성평등 의식을 고양하는 것이 정책의 최우선 순위가 되고, 여타의 삶의 질을 높이는 요소를 적극 활용하여야 한다는 결론을 도출하였다. 즉 출산율 정책의 우선순위와 인프라적 지원을 동시에 추진하기 위해 국가의 출산율 목표를 '임신 가용한 여성의 출산율 제고'에서 '국민이 행복한 사회를 만드는 것' 으로 재설정하여 행복한 사회가 되어가는 과정에서 스스로 출산을 결정할 수 있는 시스템을 만들어야 할 것이다.

한국가족계획사업(韓國家族計劃事業)의 문제점(問題點) (Problems in the Korean National Family Planning Program)

  • 홍종관
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제2권2호
    • /
    • pp.27-36
    • /
    • 1975
  • The success of the family planning program in Korea is reflected in the decrease in the growth rate from 3.0% in 1962 to 2.0% in 1971, and in the decrease in the fertility rate from 43/1,000 in 1960 to 29/1,000 in 1970. However, it would be erroneous to attribute these reductions entirely to the family planning program. Other socio-economic factors, such as the increasing age at marriage and the increasing use of induced abortions, definitely had an impact on the lowered growth and fertility rate. Despite the relative success of the program to data in meeting its goals, there is no room for complacency. Meeting the goal of a further reduction in the population growth rate to 1.3% by 1981 is a much more difficult task than any one faced in the past. Not only must fertility be lowered further, but the size of the target population itself will expand tremendously in the late seventies; due to the post-war baby boom of the 1950's reaching reproductive ages. Furthermore, it is doubtful that the age at marriage will continue to rise as in the past or that the incidence of induced abortion will continue to increase. Consequently, future reductions in fertility will be more dependent on the performance of the national family planning program, with less assistance from these non-program factors. This paper will describe various approaches to help to the solution of these current problems. 1. PRACTICE RATE IN FAMILY PLANNING In 1973, the attitude (approval) and knowledge rates were quite high; 94% and 98% respectively. But a large gap exists between that and the actual practice rate, which is only 3695. Two factors must be considered in attempting to close the KAP-gap. The first is to change social norms, which still favor a larger family, increasing the practice rate cannot be done very quickly. The second point to consider is that the family planning program has not yet reached all the eligible women. A 1973 study determineded that a large portion, 3096 in fact, of all eligible women do not want more children, but are not practicing family planning. Thus, future efforts to help close the KAP-gap must focus attention and services on this important large group of potential acceptors. 2. CONTINUATION RATES Dissatisfaction with the loop and pill has resulted in high discontinuation rates. For example, a 1973 survey revealed that within the first six months initial loop acceptance. nearly 50% were dropouts, and that within the first four months of inital pill acceptance. nearly 50% were dropouts. These discontinuation rates have risen over the past few years. The high rate of discontinuance obviously decreases the contraceptive effectiveness. and has resulted in many unwanted births which is directly related to the increase of induced abortions. In the future, the family planning program must emphasize the improved quality of initial and follow-up services. rather than more quantity, in order to insure higher continuation rates and thus more effective contraceptive protection. 3. INDUCED ABORTION As noted earlier. the use of induced abortions has been increase yearly. For example, in 1960, the average number of abortions was 0.6 abortions per women in the 15-44 age range. By 1970. that had increased to 2 abortions per women. In 1966. 13% of all women between 15-44 had experienced at least one abortion. By 1971, that figure jumped to 28%. In 1973 alone, the total number of abortions was 400,000. Besides the ever incre.sing number of induced abortions, another change has that those who use abortions have shifted since 1965 to include- not. only the middle class, but also rural and low-income women. In the future. in response to the demand for abortion services among rural and low-income w~men, the government must provide and support abortion services for these women as a part of the national family planning program. 4. TARGET SYSTIi:M Since 1962, the nationwide target system has been used to set a target for each method, and the target number of acceptors is then apportioned out to various sub-areas according to the number of eligible couples in each area. Because these targets are set without consideration for demographic factors, particular tastes, prejudices, and previous patterns of acceptance in the area, a high discontinuation rate for all methods and a high wastage rate for the oral pill and condom results. In the future. to alleviate these problems of the methodbased target system. an alternative. such as the weighted-credit system, should be adopted on a nation wide basis. In this system. each contraceptive method is. assigned a specific number of points based upon the couple-years of protection (CYP) provided by the method. and no specific targets for each method are given. 5. INCREASE OF STERILIZA.TION TARGET Two special projects. the hospital-based family planning program and the armed forces program, has greatly contributed to the increasing acceptance in female and male sterilization respectively. From January-September 1974, 28,773 sterilizations were performed. During the same time in 1975, 46,894 were performed; a 63% increase. If this trend continues, by the end of 1975. approximately 70,000 sterilizations will have been performed. Sterilization is a much better method than both the loop and pill, in terms of more effective contraceptive protection and the almost zero dropout rate. In the future, the. family planning program should continue to stress the special programs which make more sterilizations possible. In particular, it should seek to add the laparoscope techniques to facilitate female sterilization acceptance rates. 6. INCREASE NUMBER OF PRIVATE ACCEPTORS Among the current family planning users, approximately 1/3 are in the private sector and thus do not- require government subsidy. The number of private acceptors increases with increasing urbanization and economic growth. To speed this process, the government initiated the special hospital based family planning program which is utilized mostly by the private sector. However, in the future, to further hasten the increase of private acceptors, the government should encourage doctors in private practice to provide family planning services, and provide the contraceptive supplies. This way, those do utilize the private medical system will also be able to receive family planning services and pay for it. Another means of increasing the number of private acceptors, IS to greatly expand the commercial outlets for pills and condoms beyond the existing service points of drugstores, hospitals, and health centers. 7. IE&C PROGRAM The current preferred family size is nearly twice as high as needed to achieve a stable poplation. Also, a strong boy preference hinders a small family size as nearly all couples fuel they must have at least one or more sons. The IE&C program must, in the future, strive to emphasize the values of the small family and equality of the sexes. A second problem for the IE&C program to work. with in the: future is the large group of people who approves family planning, want no more children, but do not practice. The IE&C program must work to motivate these people to accept family planning And finally, for those who already practice, an IE&C program in the future must stress continuation of use. The IE&C campaign, to insure highest effectiveness, should be based on a detailed factor analysis of contraceptive discontinuance. In conclusion, Korea faces a serious unfavorable sociodemographic situation- in the future unless the population growth rate can be curtailed. And in the future, the decrease in fertility will depend solely on the family planning program, as the effect of other socio-economic factors has already been maximumally felt. A second serious factor to consider is the increasing number of eligible women due to the 1950's baby boom. Thus, to meet these challenges, the program target must be increased and the program must improve the effectiveness of its current activities and develop new programs.

  • PDF

위성영상의 시계열 분석을 통한 미기후변화 분석 -대구시 달서구를 대상으로- (A Study on Microclimate Change Via Time Series Analysis of Satellite Images -Centered on Dalseo District, Daegu City-)

  • 백상훈;정응호
    • 한국지리정보학회지
    • /
    • 제12권2호
    • /
    • pp.34-43
    • /
    • 2009
  • 바람길 도입을 통한 도시열섬현상의 저감 방안에 관한 선행연구들을 바탕으로 본 연구에서는 도시화과정을 거치면서 발생하는 토지피복의 변화가 도시공간의 찬공기 생성 및 유동에 어떠한 변화를 일으키는지 분석하였다. 연구 대상지로는 우리나라의 대표적인 극서(劇暑)도시이며 1980년대 이후 주변 지역을 편입하여 도시가 확장된 대구시 내에서도 특히 지표온도의 변화가 크고 1988년 신설되어 급격한 인구 증가가 이루어졌던 달서구를 대상으로 연구를 실시하였다. 시간적 범위로는 1987년, 1997년, 2007년의 여름철 위성영상을 이용하여 20년간의 도시미기후 변화를 연구하였다. 연구결과 자연 토지피복의 감소와 인공 토지피복의 증가는 찬공기 생성 및 유동에 불리하여 도심지에서의 찬공기의 양과 높이가 현저히 낮아졌다. 이는 찬공기 생성 및 유동기능이 토지피복에 의해 영향을 받는 것으로 보였다. 지속적인 찬공기 생성 및 유동의 확보를 위해서는 도시를 둘러싼 주변지역의 공간적 특성을 분석하여 도시개발이나 도시재생을 실시해야 하며, 이를 통해 쾌적하고 건강한 도시조성이 될 수 있을 것으로 사료된다.

  • PDF

대학졸업생들의 중소기업 취업촉진 방안에 관한 연구 : 기대가치이론을 중심으로 (Promoting College Graduate Students Motivating Entering on Small and Medium Sized Company : Based on the Expectation Value Theory)

  • 하규수
    • 벤처창업연구
    • /
    • 제9권4호
    • /
    • pp.55-64
    • /
    • 2014
  • 기업에서는 중소기업 취업기피 현상에 따른 심각한 인력부족현상을 겪고 있으나, 대학졸업자들은 대기업, 공무원 등을 선호하는 인력수급 불균형이 나타나고 있으며, 산업현장에서 요구하는 인재와 대학을 거쳐 공급하는 인재간의 불일치 현상이 심화되면서 대학졸업자의 취업난은 가중되고 있다. 본 논문은 중소기업의 인력난 완화를 위한 방안으로서 잠재적 취업준비자의 기대가치를 파악하여 그들이 대기업이 아닌 중소기업 취업을 선택하도록 영향을 미치는 주된 요인이 무엇인지 밝히고자 하였다. 설문조사는 2012년 10월 1일부터 30일까지 서울지역에 소재하는 대학생을 대상으로 하였으며, 총 350부를 배포하였으며, 이중 335부가 회수되었으며, 이중 부실한 설문지를 제거하고 최종 332부를 분석에 사용하였다. 분석방법은 SPSS 프로그램을 활용하여 기초분석, 요인분석, 신뢰도, 회귀분석을 수행하였다. 요인분석결과 중소기업 기대가치는 경력, 업무환경, 업무성취도, 고용안정성으로 나타났으며, 연구결과 중소기업 선호도에 영향을 미치는 변수는 경력, 업무환경, 고용안정성, 기업명성, 급여로 나타났다.

  • PDF

소형금속판에 고정나사의 삽입시 drilling의 위치 및 각도에 따른 시편의 이동량에 대한 효과 (THE EFFECT OF LOCATION AND ANGLE OF DRILLING ON THE CHANGES OF THE DISTANCE BETWEEN TWO BLOCK SPECIMENS DURING SCREWING ON MINIPLATE FIXATION)

  • 오현철;안진석;구홍;국민석;박홍주;오희균
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제28권3호
    • /
    • pp.213-221
    • /
    • 2006
  • Purpose This study was aimed to evaluate the effect of the location and angle of drilling on the changes of the distance between the two block specimens. Materials and methods In experimental group 1, the screw holes were prepared by drilling in the distal portion of compression part of the plate at $90^{\circ}$. In experimental group 2, the drilling was performed at an angle of $30^{\circ}$ proximal to the miniplate, and in experimental group 3, at $30^{\circ}$ distal respectively. In control group, the drilling was performed to the center of hole at $90^{\circ}$. The fixation screw length was 5 mm, 7 mm, and 9 mm in all groups. The results were as follows. Results 1. In control group, the mean changes between two specimens were 0.01 mm, 0.02 mm, and 0.00 mm in 5 mm, 7 mm, and 9 mm screws respectively. 2. In experimental group 1, the compression part was moved toward the retention part. The range of mean changes were from -0.39 mm to -0.43 mm. 3. In experimental group 2, the compression part was moved toward the retention part. The range of mean changes were from -0.51 mm to -0.56 mm. 4. In experimental group 3, the compression part was moved apart from the retention part and the range of mean changes were from 0.55 mm to 0.56 mm. 5. The changes were significantly different between all groups(p<0.01). Conclusion These results suggest that 0.4$\sim$0.5 mm of compressive effect can be achieved by drilling on the distal area of the screw hole at an angle of $90^{\circ}$ and by the proximal angulation to the miniplate, and the gap between specimens can be increased by distal angulation to the miniplate during drilling.

농업인의 농업·농촌 정책 만족도 결정요인 분석 (An Analysis of Factors Influencing on Satisfaction Level of Agricultural and Rural Polices)

  • 김선애;문승태
    • 농촌지도와개발
    • /
    • 제20권4호
    • /
    • pp.1105-1147
    • /
    • 2013
  • 본 연구는 농업 농촌 정책에 대한 농업인의 만족도를 진단하고, 만족도에 영향을 미치는 결정요인을 분석하기 위해 호남 지역 750명의 농업인을 대상으로 설문조사를 실시하였다. 분석결과 리커트 척도로 측정한 22개 정책에 대한 5점리커트척도 만족도의 평균은 2.71~3.09로 매우 낮게 나타났다. 순서형 로짓모형 분석결과 농업인의 연령이 높을수록, 소득이 많을수록, 농업관련 교육 경험이 많을수록 정책 만족도는 낮아지는 것으로 밝혀졌다. 아울러 주작목이 수도, 전작, 축산, 원예인 농가는 타작목 재배 농가에 비해 만족도가 낮은 것으로 나타났으며, 농가의 위치가 산간이나 준산간 지역인 경우 또한 만족도와 부(-)의 관계를 갖는 것으로 나타났다. 반면에 소유농지가 많을수록 만족도는 높아지는 것으로 나타났다. 22개 농업 농촌 정책가운데 농업인이 선호하는 정책은 쌀소득보전직불제, 친환경농업, 농지은행사업 등의 순으로 나타났으며, 도움이 되었다고 인지하는 정책은 수준별 맞춤형 교육, 친환경농업, 쌀소득보전직불제 등의 순으로 나타났다. 농업인이 선호하는 직접지불 정책은 농업발전에 직접적으로 기여되지 않을 수 있으므로, 농업발전을 유도하는 동시에 농가 소득을 개선 할 수 있는 정책이 농업인의 만족도롤 향상시킬 수 있으며, 도농간 소득 격차도 해소시킬 수 있을 것으로 진단되었다.

롤링을 통한 창호부착형 에어캡 모듈 개발 (Development of the Aircap Module Attached to the Window Through Rolling)

  • 허지운;서장후;김용성;이행우
    • 설비공학논문집
    • /
    • 제29권11호
    • /
    • pp.559-569
    • /
    • 2017
  • Various studies examining how to conserve building energy have been conducted recently. From such studies it has been determined that insulation performance of an aircap is viable and therefore aircaps are used as material for improving insulation performance of windows. However, the aircap for improving insulation performance of a window is attached on the front, causing infringement of the prospect right. Therefore, the purpose of this study is to develop an aircap module attached to the window through rolling, conducting performance verification throughfull-scale testbed and verifying its effectiveness. Findings of this study are as follow : 1) The module suggested in this study enables setting of an area wherein the aircap is attached through rolling so that the aircap rolls up using Velcro tape, and an insulation bar is suggested to block the gap between the aircap and window glass. 2) When the aircap is applied to the window, consumption of lighting energy increased during summer and winter by 2.8%~16.4% and 0%~76.2% respectively in comparison to no aircap application, indicating that it is unsuitable for conserving lighting energy. 3) In terms of conserving cooling and heating energy, an advantageous or effective aircap attachment method is the method whereby an aircap is attached to the front surface of a window. However, the method whereby an aircap is attached to a part of a window and where no aircap is attached increases consumption of cooling and heating energy during summer and winter by 6.0%~35.7% and 2.7%~41.6% respectively in comparison to the method wherein an aircap is attached to the front surface of a window. 4) In consideration of conserving cooling, heating and lighting energy, the attachment of an aircap to the front surface of window is the most appropriate method, and it is appropriate to attach the aircap at a position that is 1,500 mm or higher from the floor to secure the prospect right and minimize energy loss.

도시열섬연구를 위한 ASTER 위성영상과 지표면의 표면온도 비교 (Comparison of ASTER Satellite and Ground-Based Surface Temperature Measurements for Urban Heat Island Studies)

  • 송봉근;박경훈
    • 한국지리정보학회지
    • /
    • 제20권3호
    • /
    • pp.104-124
    • /
    • 2017
  • 본 연구는 대한민국 창원시의 도시지역을 대상으로 현장에서 측정된 표면온도자료를 활용하여 토지이용유형별로 ASTER 표면온도 자료의 정확성을 분석하고 보정모형을 도출하고자 하였다. 토지이용유형은 공원과 상업시설, 단독주택, 아파트를 고려하여 총 8개를 선정하였다. ASTER 표면 온도는 2012년부터 2014년까지 6월과 9월에 촬영된 주간 및 야간의 8개 영상을 수집하였고, 현장측정은 위성영상이 촬영된 시간과 동일한 시기에 실시하였다. 또한 현장에서 측정된 표면온도의 방사보정을 위해 5일 동안 21개의 토지피복재질에 대해 방사율을 측정하였다. 주간시간은 현장에서 측정된 표면온도가 위성영상의 것보다 약 $5{\sim}10^{\circ}C$ 정도 높았고, 건물의 밀집된 지역일수록 차이가 큰 것으로 분석되었다. 표면온도 보정모형은 도시공원을 제외한 나머지 지역에서 설명력이 60%로 모형의 신뢰성이 있다고 분석되었다. 야간시간은 여름철인 8월을 제외하고 주간시간과 반대로 ASTER 표면온도가 약 $2^{\circ}C$ 다소 높은 것으로 분석되었다. 그러므로 위성영상의 표면온도를 활용하기 위해서는 반드시 현장자료를 바탕으로 정확성을 검증하고 보정할 필요가 있다. 본 연구의 결과는 이러한 측면에서 매우 의미가 있으며, 앞으로 도시지역의 열섬 문제를 개선하기 위해 도시 및 환경계획 분야에서 활용가치가 뛰어날 것으로 생각된다.

동절기 벽식구조 건축물 벽부분의 버블시트 포설방법 변화가 이음부 노출철근의 온도에 미치는 영향 (Influence of Bubble Sheet Applying Methods on Temperature of Exposed Joint Rebar at Wall Surface of Load-Bearing Wall Structure Building During Winter)

  • 한천구;이제현;김민상
    • 한국건축시공학회지
    • /
    • 제17권2호
    • /
    • pp.149-155
    • /
    • 2017
  • 본 연구에서는 겨울철 타설된 콘크리트 표면을 낮은 열전도율 재료로 덮어 주므로서 우수한 단열성을 갖으며, 높은 전용성으로 경제성까지 뛰어난 2중 버블시트에 의한 표면피복 양생공법에 대하여 검토하였다. 하지만, 벽식구조 건축물 시공의 경우 버블시트로 포설되는 슬래브 부분은 초기동해를 방지할 수 있지만, 노출 철근 부분의 경우 버블시트의 포설이 까다롭기 때문에 이 부분에 대한 양생법 변화는 초기동해 피해 여부와 관련하여 의구심이 제기되고 있다. 그러므로, 본 연구에서는 실제 시공중인 벽식구조 Apt 현장의 벽체부분을 동절기 저온 조건하에서 시공하는 것을 모사하여 각종 표면피복 양생방법 변화에 따른 매립 및 노출철근 부분의 위치별 온도 분포 특성을 분석하여 효율적인 양생방법을 제안하고자 하였다. 그 결과, 여러 양생방법 중 D방법의 양생이 가장 우수하게 초기동해를 방지할 수 있는 것으로 판명되었다. 그러나, 시공의 효율성 및 시공의 편리성 까지도 감안하면 철근과 철근의 간격부 만큼에 버블시트를 좁은 폭으로 잘라 덮어주는 B방법도 우수한 방법으로 추천된다.