• 한국초등수학교육학회지
• /
• 제21권4호
• /
• pp.547-574
• /
• 2017

여러 나라의 교육과정이나 교과서를 비교 분석하는 것은 그 나라 교육 관점과 방향을 파악하여 우리나라 교육과정 개정이나 교과서 집필 및 학생들의 수학 능력 향상을 위한 시사점을 도출하기 위한 것이다. 미국의 경우에 국가 수준의 교육과정을 운영하지 않지만, 2010년에 여러 주들이 주축이 되어 개발한 CCSSM이 주별로 채택되어졌고, 이에 따른 교과서가 개발 보급되고 있다. 이에 본 연구에서는 CCSSM에 적극적인 반응을 보이며 주의 관점을 반영한 캘리포니아 주의 CA-CCSSM과 이에 따른 교과서에 제시된 분수 관련 내용을 분석하였다. 분석에서는 분수 개념과 관련된 주제를 등분할, 분수 개념, 가분수와 대분수, 몫으로서 분수와 비로서 분수, 동치분수, 크기 비교 등으로 나누어 분석하였다. 분석 결과, 분수 개념 도입 전에 기하 영역에서 등분할을 다루거나, 수직선 위의 수로 분수를 도입하여 분수에 대한 수감각과 양감을 기르게 하는 특징이 있었다. 또한 대분수, 동치분수, 여러 가지 분수의 정의 방식, 도입 시기, 방법 등에서도 우리나라와 차이가 있었다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.169-170
• /
• 1998

In this study, regional variation in vertebral bone density due to osteoporosis were investigated using a method that employs images from QCT. QCT images(1mm thick slices) of the first lumbar vertebra from a normal person (23/M, BMD=139.8mg/ml) and from an osteoporotic patient (54/F, BMD=82.0mg/ml) were obtained. Uniform settings (140kVp, 204mA) were used and images of 300 Hounsfield Unit or greater were selectied to filler out soft tissue interference. To assess the regional variation of the area fraction the vertebral body was divided into 3 layers and each layer contained 9 regions. Area faction was calculated based on image analysis data. Our results showed that the area fraction at the middle of the vertebra was quite lower than the endplate and peripheral regions, but the area fraction values from the osteoporotic patient were uniform throughout the entire height of the vertebral body, which indicates the significant drop of BMD had occurred near both end-plates due to the osteoporosis, especially at the peripheral regions. Our results suggest the susceptability of the vertebrae to compression fracture types in osteoporotic spine.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2626-2631
• /
• 2007

Air-water two phase natural circulation flow in the T-HERMES (Thermo-Hydraulic Evaluation of Reactor cooling Mechanism by External Self-induced flow)-1D experiment has been evaluated to verify and evaluate the experimental results by using the RELAP5/MOD3 computer code. The RELAP5 results have shown that an increase in the coolant inlet area leads to an increase in the water circulation mass flow rate. However, the water outlet area does not effective on the water circulation mass flow rate. As the coolant outlet moves to a lower position, the water circulation mass flow rate decreases. The water level is not effective on the water circulation mass flow rate. As the height increases in the air injection part, the void fraction increases. However, the void fraction in the upper part of the air injector maintains a constant value. An increase in the air injection mass flow rate leads to an increase in the local void fraction, but it is not effective on the local pressure.

• 대한기계학회논문집B
• /
• 제24권11호
• /
• pp.1447-1456
• /
• 2000

Simulated experiments of high pressure melt ejection(HPME) are performed to measure the released fraction of corium simulant from the French type PWR cavity. The experiments are carried out on a 1/20th linear scaled model of the Ulchin 1&2 cavity. Water or woods metal and nitrogen is used as simulant of molten corium and steam, respectively. Experimental parameters are water mass, annulus area and breach size. It is shown that only breach size effects is very important while the mass and the annulus area do not affect the released fraction. It is found that the liquid film transport is much more dominant mechanism than the entrainment droplet transport, especially in linear scale down simulated HPME experiment.

• 한국해양학회지
• /
• 제29권2호
• /
• pp.171-182
• /
• 1994

황해 해역에서 해양 유기물의 생지화학적 특성을 파악하기 위하여 용존 자유 아미 노산 조성 및 추출된 유기물의 용존 가수분해 아미노산(DFAA) 조성 그리고 D/L alanine racemic ratio를 분석하였다. 용존 자유 아미노산의 농도는 평균 0.06 uM에서 0.26 uM의 범위를 보음, 우점하는 아미노산으로는 aspartate, glutamate, glycine, serine,alanin으로 나타났다. 각 기단별 물리·화학적 특성에 따라 분류한 아미노산 group 중 해수 중에 우점하는 것은 대부분 극성이 큰 hydrophilic group으로 나타났 다. 용존 가수분해 아미노산의 농도는 생거대유기물질의 경우 평균 2.05 uM에서 6.19uM의 범위를 보였고, 지구거대유기물질의 경우 평균 8.13 uM에서 24.46uM의 범위 를 보였다. 우점하는 아미노산의 group은 자유 아미노산과 유사한 경향을 보였다. 이 러한 용존 가수분해 아미노산은 생거대유기물질보다는 지구거대유기물질에서 상대적으 로 높은 농도를 보였다. 수괴가 성충화된 정점의 용존 가수분해 아미노산 농도는 저층 에 비해 표층이 상대적으로 높은 농도를 보였다. Alanine의 D/L racemic ratio는 생거 대 유기물질의 경우 0.126에서 0.146의 범위를 보였고 지구거대유기물질의 경우 0.309 에서 0.386의 범위를 보여 지구거대유기물질이 생거대유기물질보다 상대적으로 존재 연령이 오래된 것으로 나타났다. 이러한 자료들은 수괴의 특성 뿐만 아니라 생물활성 과 밀접하게 연관된 용존 유기 화합물의 중요한 생지화학적 지표를 이용될 수 있을 것 으로 사료된다.

• Structural Engineering and Mechanics
• /
• 제62권3호
• /
• pp.273-279
• /
• 2017

A meso-scale model is proposed to study filament-wound composites with fiber undulations and crossovers. First, the crossover and undulation region is classified as the circumferential undulation and the helical undulation. Next, the two undulations are separately regarded as a series of sub-models to describe the meso-structure of undulations by using meso-parameters such as fiber orientation, fiber inclination angle, resin rich area, fiber volume fraction and bundle cross section. With the meso-structure model and the classic laminate theory, a method for calculating the stiffness of filament wound composites is eventually established. The effects of the fiber inclination angle, the fiber and resin volume fraction and the resin rich area on the stiffness are studied. The numerical results show that the elastic moduli for the circumferential undulation region decrease to a great extent as compared with that of the helical undulation region. Moreover, significant decrease in the elastic and shear moduli and increase in the Poisson's ratio are also found for the resin rich area. In addition, thickness and bundle section have evident effect on the equivalent stiffness of the fiber crossover and the undulation region.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.51-59
• /
• 2005

Co-flow laminar diffusion flames' temperature has been studied experimentally for ethylene$(C_2H_4)$ using a co-flow burner in order to investigate the characteristics of diffusion flame's temperature distribution. The temperature distributions in the flame were measured by rapid insertion of a R-type thermocouple. The measurement area was divided into three zones. 1st area was expect to created PAH zone, Il nd area was expect to form soot zone, which is known to generate most soot volume fraction, and III rd area was expect to from soot oxidization zone. Also The temperature along the flame y-axis as a fuel quantity was measured. As a results, we have measured temperature neglecting the effect of soot particles attached to the thermocouple junction, which is close to the nozzle and upstream zone has a unstable flow in co-flow diffusion flame and acquires that the flame y-axis temperature has a uniform temperature in the generated soot volume fraction zone(II nd).

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.237-240
• /
• 2004

High strain-rate deformation behavior of NiAl/Ni micro-laminated composites was characterized by split hopkins on pressure bar(SHPB). When the strain rate increased, the compressive stress of micro-laminated composites were increased a little. When the intermetallic volume fraction increased, the compressive stress of micro-laminated composites increased linearly irrespective of strain rate. Absorbed energy during the quasi-static and SHPB tests was calculated from the integrated area of stress-strain curve. Absorbed energy of micro-laminated composites deviated from the linearity in terms of the intermetallic volume fraction but merged to the value of intermetallic as the strain rate increased. This was due to high tendency of intermetallic layer for the localization of shear deformation at high strain rate. Microstructure showing adibatic shear band(ASB) confirmed that the shear strain calculated from the misalignment angle of each layer increased and ASB width decreased when the intermetallic volume fraction. Simulation test impacted by tungsten heavy alloy cylinder resulted that the absorbed energies multiplied by damaged volume of micro-laminated composites were decreased as the intermetallic volume fraction increased. Fracture mode were changed from delamination to single fracture when the intermetallic volume fraction and this results were good matched with previous results[l] obtained from the fracture tests.

• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제21권2호
• /
• pp.111-130
• /
• 2018

본 연구에서는 초등학교 수학에서 다루어지는 중요 개념 중 하나인 분수에 대하여 한국, 일본, 싱가포르, 미국, 핀란드 교과서에 제시된 내용을 비교 분석하였다. 이것은 분수의 하위 개념의 다양함, 그리고 도입 방식이나 전개 과정의 특징적 차이가 나타난다는 것과 각 나라의 개념 도입 방식의 장점과 단점을 분석함으로써 유의미한 분수 학습을 위한 준비를 위해서이다. 분석 결과, 분수 도입 상황은 5개 나라 교과서 모두 부분-전체(영역)로 도입하였지만, 수직선 활용이나 대분수 정의와 가분수-대분수 간의 변환 방식, 이산량을 다루는 것의 여부, 동치분수 구하는 방법, 분수 크기비교의 배열 순서와 같은 내용의 구성이나 선정 면에서 여러 가지 차이가 나타났다. 이러한 분석을 통해 본 연구에서는 분수 도입상황의 재고, 분수 도입 시 수직선의 활용 문제, 내용의 유형화와 분절화의 문제 등을 논의하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1507-1510
• /
• 2011

In this study, mercury vapor adsorption behaviors for some kinds of porous materials having various pore structures were investigated. The specific surface area and pore structures were studied by BET and D-R plot methods from $N_2$/77 K adsorption isotherms. It was found that the micropore materials (activated carbons, ACs) showed the highest mercury adsorption capacity. In a comparative study of mesoporous materials (SBA-15 and MCM-41), the adsorption capacity of the SBA-15 was higher than that of MCM-41. From the pore structure analysis, it was found that SBA-15 has a higher micropore fraction compared to MCM-41. This result indicates that the mercury vapor adsorptions can be determined by two factors. The first factor is the specific surface area of the adsorbent, and the second is the micropore fraction when the specific surface areas of the adsorbent are similar.