• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.873-882
• /
• 2017

Smart cards are currently used in about 150 locales, including the metropolitan ares, and are utilized as a policy base for various public areas, including public transportation, bus fares, and public transportation requirements. However, excluding the metropolitan area and some metropolitan areas, there are many areas where the existing BIS data was unable to match station information on the data and Smart cards itself are not available on the bus stop information by the line. The purpose of this research was to produce bus stop information generated by the bus stop based on the bus route, and the actual stop information generated by the model presented in the study was derived by matching the actual station information.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.3
• /
• pp.17-28
• /
• 2003

The objective of this study is to review and verify whether the functions and effect of roadside trees generally known in theory are actually realized in urban roads and how well they are performed if the function and effect are really realized. The study was conducted with a focus on air purification effect of roadside trees. The m헤r study result is as follows. First, calculation of air purification effect of roadside trees showed that it is minimal. However, 7.4 units of broad-leaved trees is necessary in order to purify $SO_2$ discharged by one passenger car and 1,803.3 trees to purify $NO_2$. Second, regarding pollutant absorption capacity, air pollutant absorption capacity increased as the number of rows planted gets higher (i.e., 2-row plantation absorbs pollutant better than I-row plantation). In particular, "2-row plantation + lower-level shrub + buffer green belt" was as eight times high as "I-row plantation" in absorption capacity. Third, out of 30 roads with over 8 lanes in 15 cities, only 33.3% or a total of ten roads in seven cities had a median strip. Out of these ten roads, nine roads were planted in a double-layer consisting forest trees, shrubs, ground plants (grass). Analysis showed that out of six tree species planted along these roads, about a half of them were weak to air pollution. Also, based on the outcome of this study, charging a "plantation due" when people purchase a new car, improving layout of roadside trees, and reinforcing plantation of air purification tree species when selecting tree species for roadside trees were proposed.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.352-360
• /
• 2016

In this paper, a novel multiple multicast feed-back scheme for improving multimedia multicast and broadcast system based on IEEE 802.11. The proposed scheme improves multicast PPDU delivery ratio of next generation wireless LAN by utilizing multicast feed-back information. By using the proposed scheme, regardless of its size of multicast group, an AP STA could collect transmission failure information by receiving simultaneous NAK frame. The proposed scheme shows large performance enhancement in broadcast or multicast system of Intelligent Transport System and Passenger Entertainment Service. According to the analysis results, the proposed scheme could enhance wireless LAN multicast and broadcast performance significantly.

• The Korean Journal of Emergency Medical Services
• /
• v.23 no.1
• /
• pp.61-69
• /
• 2019

Purpose: The study aims to provide basic data to enhance the health of paramedics responsible for patient transport and treatment by analyzing the exposure level of paramedics to electromagnetic waves generated by electric devices used in ambulances. Methods: The study measured electromagnetic waves in ambulances in N region from July to December 2018. ME3030B produced by German Gigahertz Solutions was used to measure these waves and the maximum value was selected by moving it slowly in various directions. Each measurement part was selected and the mean value was calculated by repeatedly measuring at 10-minute intervals three times in total: $1^{st}$, $2^{nd}$, and $3^{rd}$ phase. Results: Among the electrical devices installed in the patient room of the ambulance measured at distances of 1 cm or 30 cm, results showed a high level of electric waves at the inverter ($26.25{\pm}39V/m$) and high level of electromagnetic waves ($564.00{\pm}31.75nT$) at the ozone sterilizer. According to measurements toward the front near the driver's seat, results indicated high levels of electric waves ($3.67{\pm}1.15V/m$) and electromagnetic waves ($450.00{\pm}19.52nT$) at the black box hard drive. Conclusion: Electromagnetic waves within the ambulance were stable and not beyond the range that might impact human health. However, in the case of the black box hard drive ($3.67{\pm}1.15V/m$, $450.00{\pm}19.52nT$) located under the passenger seat, it may have a direct effect on the human body and, thus it is necessary to move it to a storage area further away from the paramedics to minimized the impact.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.18-23
• /
• 2017

The shipyard quay process struggles to control workers and maintain a secure working environment because of the presence of at least 1,000 people. Therefore, safety accidents such as an explosion or a fire are likely to occur. With the recent increase in safety accidents at shipyards, the requirements for safety and process monitoring have been strengthened. Major shipyards are conducting researchto monitor the process in real time and to detect the work environment for safety. In this paper, we propose a safe and accurate evacuation route based on the information of the dangerous area and the user's location based on a mobile application to reduce the casualty accidents in the presence of many personnel in a concentrated area. To do this, we analyze the trend of the fire escape system on the ground building, compare various algorithms for escape route calculation, select appropriate algorithms for this study, and perform programming. A basic experiment was conducted to confirm the results. The proposed method is expected to be used in large ship construction sites, passenger ships and large public facilities to reduce accidents in the case of a safety accident.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.121-133
• /
• 2017

Since the mid 1990s, policies have been actively promoted to improve safety and pedestrian environment around the school such as the improvement of School zone. However, the prevention of accidents was not effective because it did not extend to the school road where the main transportation route for children's commuting takes place. In addition, due to the rapid increase of automobiles, trunk road traffic in the peak time bypasses the back roads, which threatens children's safety and the environment by invading the school area, which is the main living space of children. In this study, the characteristics of domestic children's traffic accidents were investigated and the problems were analyzed by conducting a field survey on Yeouido Secondary School in Seoul and Unjung Elementary School in Gyeonggi Province. In addition, Variable speed limit signs and Beacons were installed in the pedestrian road of comunity including School zone, and the effects of facilities on the speed of vehicles were analyzed. As a result of the analysis, the Variable speed limit sign showed a deceleration effect of about 8.3km/h, and the Beacon showed a phenomenon in which the traveling speed of 0.8km/h increased only slightly. In addition, the traffic violation rate of passenger cars, buses, and lorries decreased by about 3% as a result of investigating the number of traffic violation vehicles before and after installation.

• Korean Journal of Culture and Social Issue
• /
• v.8 no.1
• /
• pp.17-40
• /
• 2002

The purpose of this study is to investigate the differences in the traffic environments and driving behaviors in 5 regions of Korea. Data were collected through the survey research from 1387 passenger car drivers in 14 locations in Korea. The main findings of this research are as followings: First of all, There were significant differences in traffic environment factors(road topography, construction, road & safety facilities, pedestrian behaviors, surrounding drivers) among 5 regional areas. When we examined drivers factors, there were significant differences among 5 metropolitan areas on wearing seat belt, most of constructions related to drink driving, speed-limit violation. There were many differences in driving habits, intentions, behaviors including wearing seat belt, driving after drinking according to metropolitan area, and also in case of speed-limit violation and careless driving behavior. These results suggested that there are many differences in traffic environments and driver's behaviors among regional areas. These result suggests that traffic safety policy and practice should be prepared based upon the peculiarities of regional area. We discussed these resulte in terms of the regional traffic policy and the suggestions for future studies were added.

• Korean Journal of Remote Sensing
• /
• v.23 no.4
• /
• pp.323-334
• /
• 2007

We analyzed the ocean environmental data from water sample and automatic measurement instruments with the Incheon-Jeju passenger ship for 18 times during 4 years from 2001 to 2004. The objectives of this study are to monitor the spatial and temporal variations of ocean environmental parameters in coastal waters of the Yellow Sea using water sample analysis, and to compare and analyze the reliability of automatic measurement sensors for chlorophyll and turbidity using in situ measurements. The chlorophyll concentration showed the ranges between 0.1 to $6.0mg/m^3$. High concentrations occurred in the Gyeonggi Bay through all the cruises. The maximum value of chlorophyll concentration was $16.5mg/m^3$ in this area during September 2004. The absorption coefficients of dissolve organic matter at 400 nm showed below $0.5m^{-1}$ except those in August 2001 During 2002-2003, it did not distinctly change the seasonal variations with the ranges 0.1 to $0.4m^{-1}$. In the case of suspended sediment (SS) concentration, most of the area showed below $20g/m^3$ through all seasons except the Gyeonggi Bay and around Mokpo area. In general SS concentration of autumn and winter season was higher than that of summer. The central area of the Yellow Sea appeared to have lower value $10g/m^3$. The YSI fluorometer for chlorophyll concentration had a very low reliability and turbidity sensor had a $R^2$ value of 0.77 through the 4 times measurements comparing with water sampling method. For the automatic measurement using instruments for chlorphlyll and suspended sediment concentration, McVan and Choses sensor was greater than YSI multisensor. The SeaWiFS SS distribution map was well spatially matched with in situ measurement, however, there was a little difference in quantitative concentration.

• Archives of design research
• /
• v.16 no.4
• /
• pp.185-196
• /
• 2003

The demand for an environment-friendly transportation system, equipped with low energy consumption, and low-or zero-pollution has been on the increase since the beginning of the World Trade Organization era. Simultaneously, the consistent growth of high-speed tram technology, combined with market share, has sparked a fierce competition among technologically-advanced countries like France, Germany, and Japan in an effort to keep the lead in high-speed train technology via extensive Research and development(R＆D) expenses. These countries are leaders in the race to implement the next-generation transportation system, build intercontinental rail way networks and export the high-speed train as a major industry commodity. The need to develop our own(Korean) 'high-speed train' technology and its core system technology layouts including original technology serves a few objectives: They boost the national competitive edge; they develop an environmental friendly rail road system that can cope with globalization and minimize the social and economic losses created by the growing traffic-congested delivery costs, environment pollution, and public discomforts. In turn, the 'G7 Project-Development of High Speed Railway Technology' held between 1996 and 2002 for a six-year period was focused on designing a domestic train capable of traveling at a speed of 350km/h combined and led to the actual implementation of engineering and producing the '2000 high-speed train:' This paper summarizes and introduces one of the G7 Projects-specifically, the design segment achievement within the development of train system engineering technology. It is true that the design aspect of the Korean domestic railway system program as a whole was lacking when compared with the advanced railroad countries whose early phase of train design emphasized the design aspect. However, having allowed the active participation of expert designers in the early phase of train design in the current project has led to a new era of domestic train development and the implementation of a way to meet demand flexibly with newly designed trains. The idea of a high-speed train in Korea and its design concept is well-conceived: a faster, more pleasant, and silent based Korean high-speed train that facilitates a new travel culture. A Korean-type of high-speed train is acknowledged by passengers who travel in such trains. The Korean high-speed prototype train has been born, combining aerodynamic air-cushioned design, which is the embodiment of Korean original design of forehead of power car minimized aerodynamic resistance using a curved car body profile, and the improvement of the interior design with ergonomics and the accommodation of the vestibule area through the study of passenger behavior and social culture that is based on the general passenger car.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.6
• /
• pp.603-611
• /
• 2020

This study collected and analyzed transportation card data in order to better understand the operation and usage of city buses in Ulsan Metropolitan City in Korea. The analysis used quantitative and qualitative indicators according to the characteristics of the data, and also the categories were classified as general status, operational status, and satisfaction. The existing city bus survey method has limitations in terms of survey scale and in the survey process itself, which incurs various types of errors as well as requiring a lot of time and money to conduct. In particular, the bus means indicators calculated using transportation card data were analyzed to compensate for the shortcomings of the existing operational status survey methods that rely entirely on site surveys. The city bus index calculated by using the transportation card data involves quantitative operation status data related to the user, and this results in the advantage of being able to conduct a complete survey without any data loss in the data collection process. We took the transportation card data from the entire city bus network of Ulsan Metropolitan City on Wednesday April 3, 2019. The data included information about passenger numbers/types, bus types, bus stops, branches, bus operators, transfer information, and so on. From the data analysis, it was found that a total of 234,477 people used the city bus on the one day, of whom 88.6% were adults and 11.4% were students. In addition, the stop with the most passengers boarding and alighting was Industrial Tower (10,861 people), A total of 20,909 passengers got on and off during the peak evening period of 5 PM to 7 PM, and 13,903 passengers got on and off the No. 401 bus route. In addition, the top 26 routes in terms of the highest number of passengers occupied 50% of the total passengers, and the top five bus companies carried more than 70% of passengers, while 62.46% of the total routes carried less than 500 passengers per day. Overall, it can be said that this study has great significance in that it confirmed the possibility of replacing the existing survey method by analyzing city bus use by using transportation card data for Ulsan Metropolitan City. However, due to limitations in the collection of available data, analysis was performed only on one matched data, attempts to analyze time series data were not made, and the scope of analysis was limited because of not considering a methodology for efficiently analyzing large amounts of real-time data.