• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.161-169
• /
• 2000

AGT(Automated Guide-way Transit System) was introduced to satisfy the every increasing need for improved urban transportation. The AGT system is classified as medium distance and demand capacity mass transit being introduced for such area with inadequate passenger demand for railway construction but excessive demand for bus service. To decrease initial investment cost it is important that we have to secure the technology system of Light Rail Transit for Korea environment. By utilizing the finite element analysis, the result in this paper is enough to satisfy the strength whish is required. Also for the purpose of safety, it is decided the thickness and frame structure of the undeframe section through the analysis. It is known that carbody is no problem for required design conditions.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.4
• /
• pp.36-42
• /
• 2018

Although continuous passenger injuries and physical damages are repeated due to the unexpected aviation turbulence encountered during operations, there is still exist the limitation for preventing recurrence of similar events because the lack of real-time information and delay in technological developments regarding various operating conditions and variable weather phenomena. The purpose of this study is to compare and analyze the meteorological data of the aviation turbulence occurred and actual flight data extracted from the Quick Access Recorder(QAR) to provide some precursors that the pilot can identify aviation turbulence early by referring thru the flight instrumentation indications. The case applied for this study was recent event, a scheduled flight from Incheon Airport, Korea to Narita Airport, Japan that suddenly encountered turbulence at an altitude of approximately 14,000 feet during approach. According to the Korea Meteorological Administration(KMA)'s Regional Data Assessment and Prediction System(RDAPS) data, it was observed that the strong amount of vorticity in the rear area of jet stream, which existed near Mount Fuji at that time. The QAR data analysis shows significant changes in the aircraft's parameters such as Pitch and Roll angle, Static Air Temperature(SAT), and wind speed and direction in tens of seconds to minutes before encounter the turbulence. If the accumulate reliability of the data in addition and verification of various parameters with continuous analysis of additional cases, it can be the precursors for the pilot's effective and pre-emptive action and conservative prevention measures against aviation turbulence to reduce subsequent passenger injuries in the aviation operations.

• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.165-170
• /
• 2019

According to the statistics of the Ministry of Land Transport and Transportation in 2018, the average annual average number of air traffic users for has increased by 5.07% for domestic flights and 8.84% for international flights. Korea is facing a steady rise in demand from foreign tourists due to the Korean Wave. At the same time, a new lifestyle that values the quality of life of individuals is taking root, along with the emergence of LCC, and Korean tourists' overseas tours are also increasing, so improvement and expansion of domestic airport passenger terminals is urgently needed. it is important to develop a structured airport infrastructure by making efficient and accurate forecasts of aviation demand. in this study, based on the Big Data, long-term domestic and international demand forecasts for urban airports were conducted.. Domestic flights will see a decrease in the number of airport passengers after 2028, and international flights will continue to increase. It is imperative to improve and expand passenger terminals at domestic airports.

• The Journal of Bigdata
• /
• v.7 no.2
• /
• pp.75-90
• /
• 2022

Recently, complex and sophisticated analysis of transportation is required due to changes in the socioeconomic environment and the development of bigdata technology. Especially, the revision of 3 laws including PERSONAL INFORMATION PROTECTION ACT makes it possible to combine various types of mobility data. But strengthen personal information protection makes inefficiency in utilizing mobility bigdata. In this paper, we proposed the "Virtual fusion methdology via mobility bigdata" which is a methodology for indirect data fusion for various mobility bigdata such as mobile data and transportation card data, in order to resolve legal restrictions and enable various transportation analysis. And we also analyzed regional bus passenger in Seoul capital area and Cheongju city with aforementioned methodology for verification. This methdology could analyze behavioral pattern of passenger with the MCGM(Mobility Comprehensive Genetic Map), graph with position and time, making with mobile data. Consquently, using MCGM, which is a result for indirect data fusion, makes it possible to analyze various transportation problems.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1486-1493
• /
• 2008

In this paper, we performed analysis and comparison on emergency response action for passengers, drivers, workers and controllers in case of failure occurrence on rail infrastructure and rolling stock. In general, the subjects of emergency response action perform the response action with following emergency response procedures when accidents occurred. In reality, however, no matter how well the subjects are trained, it is hard to follow the emergency response procedures precisely without making any mistakes. As for emergency response action, the most significant factor for the subjects is to follow the emergency response procedures as learned, without any hesitation. In this paper, therefore, we analyzed the emergency response actions that should be performed by passengers and railway workers when emergency accidents occurred. We also examined the communication facilities for emergency response among train, wayside and station in order to provide the emergency reporting system for passenger and the method for cleaning out the accident area.

• Transactions of Materials Processing
• /
• v.24 no.5
• /
• pp.354-360
• /
• 2015

AHSS (Advanced High Strength Steels) has been increasingly employed by global automotive OEMs in order to satisfy strengthened regulations and reduce weight for fuel efficiency. Hot stamping using boron steels in AHSS increases not only formability but also strength. The typical hot-stamped automotive part is the center pillar that is critical for vehicle side impact. However, the hot-stamped part can be risky for the passenger safety caused by brittle fracture under a vehicle collision. The high power diode laser is suitable for the heat treatment giving AHSS increased elongation that prevents brittle fracture in car crash. Therefore, local softening by laser heat treatment for energy absorption area on the hot-stamped part improves crash-worthiness.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2040-2045
• /
• 2008

The priority of Crashworthiness concept for rolling stock is progressively increasing to reduce the damage of drivers and passengers as well as the car. For the first step of this research, the analysis of the crash elements have been performed. Also the longitudinal collapse force and mode is important point for whole carbody structure to guarantee the lower force at end part rather than the main passenger area. The carbody quasi-static collapse analysis and real test has been performed in the research. The crash elements FEA and test has been performed as well. After the initial Analysis and test, the correlation analysis between the FEA and test has been performed by FEA tunning. All this result will be used for real crashworthiness design for carbody structure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.268-271
• /
• 2018

Smart Airport which applies the new ICT technologies to the airport is a future airport to provide convenient and safe services for passengers who are airport users, and promote the efficient management of the airport system in point of airport operator's view. The ranges of smart airport include the overall area of the airport like land side, terminal, and air side. In this paper, we propose a technical solution for airport process of terminal providing passenger convenience in various ranges for smart airport realization. Self-service such as web or mobile check-in, self check-in/tagging/back drop/boarding etc. should be strengthened to smartize the airport process and technologies such as automatic immigration, smart security search and automatic AI-based baggage search should be applied. In this paper, we explain the concept of smart airport and smart process, and then propose technical considerations.

• Journal of the Korean Society for Railway
• /
• v.18 no.6
• /
• pp.513-521
• /
• 2015

When a GTX travels through a deep-level underground tunnel at a speed of 180km/h, ear-discomfort in passengers due to the pressure wave generated could be an issue due to the small cross-sectional area. Therefore, appropriate pressure-tightness values for GTX trains must be secured as a countermeasure. In this paper, a 1D numerical analysis was conducted to determine the pressure-tightness coefficient which allows a pressure change meet the criteria. The pressure transients in a tunnel and in a passenger car are predicted considering an A-line underground tunnel with a length of 37km and its operation schedule. The required pressure-tightness of the car is predicted to be three seconds and 6 seconds respectively for a single track and a double- track tunnel to prevent aural discomfort in passengers. The result of this study are expected to serve as useful information to those involved in the development of various solutions to improve air-tightness of GTX passenger cars.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1936-1942
• /
• 2009

Shinbundang-line is new Metropolitan Railway which was invested by private capital and is under construction for opening in 2010. Now Shinbundang-line pursues various innovation, for example, an express train which uses long distance of each station, and an unmanned operation. And it may be independent of existing metropolitan railway system from a viewpoint of line and fare system. So according to the present plan, Shinbundang-line will be not able to get sufficient demand because of weak connection with existing lines and monotonous function of the line. And it may be difficult to deliver various innovation which Shinbundang-line prepares to passengers. Hereupon, in this paper, I propose 3 methods for increasing competitive power of Shinbundang-line railway. First, making Shinbundang-line a trunk railway line of southern metropolitan area was proposed in relation to northern and southern extension of it. In addition connection with bus and light rail was discussed. Second, multipurpose usage of Shinbundang-line was proposed as express train and conventional passenger train in that line in addition to simple metropolitan railway. Finally, an effective operation method which Shinbundang-line must have was proposed from unmanned driving and fare system side. These methods can improve Shinbundang-line and then it will solve traffic congestion of southern metropolitan area effectively.