• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.583-585
• /
• 2016

The recent advances in wireless networks area have led to new techniques, such as small cells or full-duplex (FD) transmission, have also been developed to further increase the network capacity. Particularly, full-duplex communication promises expected throughput gain by doubling the spectrum compared to half-duplex (HD) communication. Because this technique permits one set of frequencies to simultaneously transmit and receive signals. In this paper, we focus on the binary power control for the users and the base stations in full-duplex multiple cellulars wireless networks to obtain optimal sum-rate under the effect interference and noise. We investigate with a scenario in there one carrier is assigned to only one user in each cell and construct a model for this problem. In this work, we apply the binary power control by the its simplification in the implemented algorithm for both uplink and downlink simultaneously to maximize sum data rate of the system. At first, we realize the 2-cells case separately to check the optimal power allocation whether being binary. Then, we carry on with N-cells case in general through properties of binary power control.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1843-1853
• /
• 1997

The channel throughput and packet delay of wireless media control (MAC) protocols with Rayleigh fading, log-normal shoadowing and near-far effects are analyzed. We consider CSMA/CA protocols as the wireless MAC protocols, since CSMA/CA protocols are based on the standard for wireless Local Area Networks (LANs) IEEE 802. 11. We have found that the performance of CSMA/CA in radion channel model is reduced above 50% than those of error free channel model in low traffic load. We also found that 4-Way Handshake CSMA/CA protocol is supterior to the other CSMA/CA protocols in high traffic load.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.327-338
• /
• 2011

With the incitation to reduce power consumption and the aggressive reuse of spectral resources, there is an inevitable trend towards the deployment of small-cell networks by decomposing a traditional single-tier network into a multi-tier network with very high throughput per network area. However, this cell size reduction increases the complexity of network operation and the severity of cross-tier interference. In this paper, we consider a downlink two-tier network comprising of a multiple-antenna macrocell base station and a single femtocell access point, each serving multiples users with a single antenna. In this scenario, we treat the following beamforming optimization problems: i) Total transmit power minimization problem; ii) mean-square error balancing problem; and iii) interference power minimization problem. In the presence of perfect channel state information (CSI), we formulate the optimization algorithms in a centralized manner and determine the optimal beamformers using standard convex optimization techniques. In addition, we propose semi-decentralized algorithms to overcome the drawback of centralized design by introducing the signal-to-leakage plus noise ratio criteria. Taking into account imperfect CSI for both centralized and semi-decentralized approaches, we also propose robust algorithms tailored by the worst-case design to mitigate the effect of channel uncertainty. Finally, numerical results are presented to validate our proposed algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.70-75
• /
• 2005

The efficient hardware design of the the algorithm is important in wide variety of DSP. One example is OFDM(Orthogonal Frequency Division Multiplexing) based WLAN(Wireless Local Area Network) systems which place high requirements on throughput and power consumption on FFT. The output RAM is composed of two banks of $64{\times}W.$ The banks are swapped immediately following the falling edge or the start signal strobe. This bank swapping allows 64-Point FFT to continue Processing samples and to continue filling the alternative bank, without affecting the data flow outputs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.801-810
• /
• 2014

In this paper, we will provide a way to grant a differentiated service rate that is according to priorities of WLP device and WUSB/DRD transfer mode by improving D-SoQ that considers existing QoS of WiMedia WSS environment based on UWB technology. The proposed method makes it possible to differentiate SoQ performance and throughput, based on priority of traffic streams.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.282-290
• /
• 2006

In vertically overlaid cellular systems, a temporary traffic concentration can occur in a hot-spot area, and this adversely affects overall system capacity. In this paper, we develop an adaptive hot-spot operating scheme (AHOS) to mitigate the negative effects from the nonuniform distribution of user location and the variation in the mixture of QoS requirements in orthogonal frequency division multiple access downlink systems. Here, the base station in a macrocell can control the operation of picocells within the cell, and turns them on or off according to the system overload estimation function. In order to determine whether the set of picocells is turned on or off, we define an AHOS gain index that describes the number of subcarriers saved to the macrocell by turning a specific picocell on. For initiating the picocell OFF procedure, we utilize the changes in traffic concentration and co-channel interference to the neighboring cells. According to computer simulation, the AHOS has been proved to have maximize system throughput while maintaining a very low QoS outage probability under various system scenarios in both a single-cell and multi-cell environments.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.3
• /
• pp.61-66
• /
• 2015

Recently, the major trends of NIL are high throughput and large area patterning. For UV NIL, if it can be proceeded in the non-vacuum environment, which greatly simplifies tool construction and greatly shorten process times. However, one key issue in non-vacuum environment is air bubble formation problem. In this paper, numerical analysis of bubble defect of UV NIL is performed. Fluent, flow analysis focused program was utilized and VOF (Volume of Fluid) skill was applied. For various resist-substrate and resist-mold angles, effects of velocity inlet and residual layer thickness of resist on bubble defect formation were investigated. The numerical analyses show that the increases of velocity inlet and residual layer thickness can cause the bubble defect formation, however the decreases of velocity inlet and residual layer thickness take no difference in the bubble defect formation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.9-15
• /
• 2017

In this paper, we propose a resource allocation scheme for high-power user equipment (HPUE) in public safety communication environments. The use of HPUE is being considered to increase the throughput and communication range of a UE in the disaster area where normal communication links are not available. However, HPUE may cause higher interference to UE's in adjacent cells that are allocated to the same radio resources. Therefore, it is necessary to deal with the potential interference through frequency planning and resource allocation. The performance of the proposed resource allocation scheme is evaluated through simulations in 3GPP public safety communication scenarios.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.3
• /
• pp.149-155
• /
• 2005

In this paper, we optimize simulation model of a manufacturing system using the real-coded genetic algorithm. Because the manufacturing system expressed by simulation model has stochastic process, the objective functions such as the throughput of a manufacturing system or the resource utilization are not optimized by simulation itself. So, in order to solve it, we apply optimization methods such as a genetic algorithm to simulation method. Especially, the genetic algorithm is known to more effective method than other methods to find global optimum, because the genetic algorithm uses entity pools to find the optimum. In this study, therefore, we apply the real-coded genetic algorithm to simulation optimization of a manufacturing system, which is known to more effective method than the binary-coded genetic algorithm when we optimize the constraint problems. We use the reproduction operator of the applied real-coded genetic algorithm as technique of the remainder stochastic sample with replacement and the crossover operator as the technique of simple crossover. Also, we use the mutation operator as the technique of the dynamic mutation that configures the searching area with generations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.3
• /
• pp.240-247
• /
• 2009

In this paper, we proposed the method of the interference evaluation between the microwave oven noise and the wireless LAN(Local Area Network) by using the GTEM cell. We used microwave oven noise in time to assess the interference unintentional noise effects on wireless LAN and realized by combining an AM(Amplitude Modulation) modulator and a FM(frequency Modulation) modulator. Also the GTEM cell can be used to guarantee the reliability by the evaluations of the frequency and time responses. As measurement results for the APD(Amplitude Probability Distribution) of the interfering noise we analyzed the effect of microwave oven noise to the throughput of wireless LAN.