• Journal of Nutrition and Health
• /
• v.55 no.6
• /
• pp.642-655
• /
• 2022

Purpose: We examined the effects of the 8-week moderate-intensity Pilates exercise program on body composition, balance ability, metabolic parameters, arterial condition, and eating habits among overweight and obese women. Methods: From the general sample of overweight or obese Korean women (body mass index ≥ 23 kg/m² ), those who had not been diagnosed with any chronic degenerative diseases were enrolled in the study (n = 39). After 8 weeks of the Pilates exercise program, the participants were subdivided into adherence and non-adherence groups. Among the study participants, 24 women were matched for age and menopausal status to reduce the bias, and then finally included for the comparison (Pilates-adherence, n = 12; Pilates-non-adherence, n = 12). Results: The body balance measured by the Y-balance test, body mass index, and subcutaneous fat areas were significantly improved in both groups. However, the Pilate-sadherence group showed more positive changes in body balance and had significant improvement in body composition parameters such as waist size, visceral fat area, systolic blood pressure, arterial aging index, fasting blood glucose, and glycated hemoglobin than the Pilates-non-adherence group. In addition, the nutrition quotient for Korean adults (balance, moderation, and behavior except diversity) were significantly improved in both groups after dietary education. However, the participants did not show dramatic improvement in the metabolic parameters, because all the study subjects were in relatively good health and did not have any diagnosed diseases. Conclusion: This study demonstrated that higher adherence to the Pilates exercise program together with a modification of eating habits may effectively improve body balance, body composition, and obesity-related parameters among overweight and obese women.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.2
• /
• pp.11-18
• /
• 2023

This study aims to distinguish what can be used in consideration of the national situation with Korea for Chinese Scenic and Historic Interest Areas, and the results are as follows; First, the Chinese Scenic and Historic Interest Areas expanded to the existing scenic cruise culture, travel, and tourism culture in the process of the influx of Western culture in the modern and contemporary era, and became popular as a travel destination. Accordingly, the Chinese government developed the tourism industry around the scenic sites, and thanks to the development of transportation and communication, the Scenic and Historic Interest Areas has become an important national heritage. This influenced the establishment of the system related to Scenic and Historic Interest Areas, and today, it is operated around the Scenic and Historic Interest Areas ordinance. Second, the designation of the Scenic and Historic Interest Areas is divided into the size of the site according to the area, and the process of selecting the Scenic and Historic Interest Areas classification, rating evaluation, and comprehensive value evaluation according to evaluation indicators and rating standards is carried out. Accordingly, according to the results of the classification, it is subdivided from the national level to the Scenic and Historic Interest Areas at the local level. Third, the central government is in charge of managing and supervising Scenic and Historic Interest Areas across the country, and the local government's construction department is in charge of supervising Scenic and Historic Interest Areas in the region. The management organization of Scenic and Historic Interest Areas established by local governments above the county level has a system that actually protects, utilizes, and manages Scenic and Historic Interest Areas. In addition, 14 detailed indicators are used to monitor Scenic and Historic Interest Areas. Based on these results, considering the application of the domestic scenic site policy, the method of developing the policy that has established the system from the perspective of the utilization of the people is worth considering. On the other hand, the evaluation of the designation and management system through the setting of various indicators has limitations in that it is difficult to secure objectivity in impressing or evaluating the landscape. Therefore, rather than blindly introducing quantified evaluation, it seems that guidance and promotion on how to expand consensus on scenic values and enjoy heritage should be prioritized.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.11 no.1
• /
• pp.79-94
• /
• 2009

The research project was conducted to develop a paper bagging machine for grape. This technology was aimed to highly reduce a labor for paper bagging in grape and bakery. In agriculture labor and farm population has rapidly decreased since 1980 in Korea so there was so limit in labor. In particular there is highly population in women and old age at rural area and thus labor cost is so high. Therefore a labor saving technology in agricultural sector might be needed to be replaced these old age with mechanical and labor saving tool in agriculture. The following was summarized of the research results for development of a paper bagging machine for grape. 1. Development of a new paper bagging machine for grape - This machine was designed by CATIA VI2/AUTO CAD2000 programme. - A paper bagging machine was mechanically binded a paper bag of grape which should be light and small size. This machine would be designed for women and old age with convenience during bagging work at the field site. - This machine was manufactured with total weight of less than 350g. - An overage bagging operation was more than 99% at the actual field process. - A paper bagging machine was designed with cartridge type which would be easily operated between rows and grape branches under field condition. - The type of cartridge pin was designed as a C-ring type with the length of 500mm which was good for bagging both grape and bakery. - In particular this machine was developed to easily operated among vines of the grape trees. 2. Field trials of a paper bagging machine in grape - There was high in grape quality as compared to the untreated control at the application of paper bagging machine. - The efficiency of paper bagging machine was 102% which was alternative tool for the conventional. - The roll pin of paper bagging machine was good with 5.3cm in terms of bagging precision. - There was no in grape quality between the paper bagging machine and the conventional method. - Disease infection and grape break was not in difference both treatments.

• Journal of Korean Society of Forest Science
• /
• v.112 no.1
• /
• pp.71-82
• /
• 2023

Forest biomass is used as a representative indicator of forest size, maturity, and productivity. Therefore, quantitative evaluation is important for management and harvest as well as the evaluation of ecosystem functions and services including CO₂ absorption. The allometric equation is a widely used method for estimating the value of each component through the relative growth rate of plants. Recently, studies indicated that the relative growth of trees is changing because of the increased CO₂ concentration in the atmosphere and the resulting climate change, raising the need to review the previously developed relative growth models and coefficients. In this study, the height-diameter at breast height (DBH) relationships of four major tree species in Korea [(Pinus densiflora (PD), Larix kaempferi (LK), Quercus variabilis (QV), and Quercus mongolica (QM)] were analyzed using the 5th-7th National Forest Inventory (NFI) data. Furthermore, these results were compared with the present yield table from the National Institute for Forest Science. This analysis revealed that the expected height for the same DBH increased as the NFI progressed. For example, in model analysis, the expected heights for PD, LK, QV, and QM for DBH of 25 cm were 12.48, 19.17, 14.47, and 13.19 m, respectively, in the 5th NFI data. In the 7th NFI data, these values were estimated as 13.61 (+9.1%), 21.58 (+12.7%), 15.76 (+8.9%), and 13.93 m (+5.6%), respectively. These results indicate that the major tree species in South Korean forests currently are more vigorous in height growth than in diameter growth when compared to the height-DBH development trends by tree species identified through past survey data.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.57-70
• /
• 2009

Considerable advance has been made on research on effect of steel pipe Umbrella Arch Method (UAM) and mechanical reinforcement mechanism through numerical analyses and experiments. Due to long analysis time of three-dimensional analysis and its complexity, un-quantitative two-dimensional analysis is dominantly used in the design and application, where equivalent material properties of UAM reinforced area and ground are used, For this reason, development of reasonable, theoretical, quantitative and easy to use design and analysis method is required. In this study, both field UAM tests and laboratory tests were performed in the residual soil to highly weathered rock; field tests to observe the range of reinforcement, and laboratory tests to investigate the change of material properties between prior to and after UAM reinforcement. It has been observed that the increase in material property of neighboring ground is negligible, and that only stiffness of steel pipe and cement column formed inside the steel pipe and the gap between steel pipe and borehole contributes to ground reinforcement. Based on these results and concept of Convergence Confinement Method (CCM), two dimensional axisymmetric analyses have been performed to obtain the longitudinal displacement profile (LDP) corresponding to arching effect of tunnel face, UAM effect and effect of supports. In addition, modified load distribution method in two dimensional plane-strain analysis has been suggested, in which effect of UAM is transformed to internal pressure and modified load distribution ratios are suggested. Comparison between the modified method and conventional method shows that larger displacement occur in the conventional method than that in the modified method although it may be different depending on ground condition, depth and size of tunnel, types of steel pipe and initial stress state. Consequently, it can be concluded that the effect of UAM as a beam in a longitudinal direction is not considered properly in the conventional method.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.282-288
• /
• 2023

In this study, we analyzed the amount of roadside fine dust generated from newly constructed specially modified asphalt pavement and general asphalt pavement from existing roads. We collected the 1,000 g (100 g/day) of dust samples from the roadside of the express bus terminal and commercial facility area in Chungcheongnam-do's C site at three-day intervals during the summer of 2022 and 2023. The collected samples were separated from fine dust according to size in the 75-150 ㎛ range and, were separated only from Tire and Road Wear Particles through density separation. No.1-3 are general asphalt pavement section as an existing road. Fine dust and Tire and Road Wear Particles in No.1-3 were 24.27 g, 24.36 g, 0.53 g, and 0.53 g, respectively, and the quantitative results for 2022 and 2023 were similar. On the other hand, No.4-6 are newly constructed specially modified asphalt pavement section. Fine dust decreased by 14.8 % and tire and road wear particles decreased by 29.6 % in 2023 compared to 2022 in No.4-6. In addition, according to the results of thermogravimetric analysis, Tire and road wear particles in No.1-3 are tire and road components at 30 % and 70 %, respectively. And Tire and road wear particles in No.4-6 are tire and road components at 35 % and 65 % in 2023, respectively. From these results, it was confirmed that the newly constructed specially modified asphalt pavement can be effective in reducing roadside fine dust and Tire and Road Wear Particles. However, there may be some shortcomings in conclusive research results due to limited space and sample collection period. In the future, we plan to conduct various case studies.

• Journal of Korea Water Resources Association
• /
• v.56 no.11
• /
• pp.775-784
• /
• 2023

With the increasing trend of extreme rainfall that exceeds the design frequency of man-made structures due to extreme weather, it is necessary to review the safety of agricultural reservoirs designed in the past. However, there are no local government-managed reservoirs (13,685) that can be discharged in an emergency, except for reservoirs over a certain size under the jurisdiction of the Korea Rural Affairs Corporation. In this case, it is important to quickly deploy a mobile siphon to the site for preliminary discharge, and this study evaluated the applicability of a mobile siphon with a diameter of 200 mm, a minimum water level difference of 6 m, 420 (m²/h), and 10,000 (m²/day), which can perform both preliminary and emergency discharge functions, to the Yugum Reservoir in Gyeongju City. The test bed, Yugum Reservoir, is a facility that was completed in 1945 and has been in use for about 78 years. According to the hydrological stability analysis, the lowest height of the current dam crest section is 27.15 (EL.m), which is 0.29m lower than the reviewed flood level of 27.44 (EL.m), indicating that there is a possibility of lunar flow through the embankment, and the headroom is insufficient by 1.72 m, so it was reviewed as not securing hydrological safety. The water level-volume curve was arbitrarily derived because it was difficult to clearly establish the water level-flow relationship curve of the reservoir since the water level-flow measurement was not carried out regularly, and based on the derived curve, the algorithm for operating small and medium-sized old reservoirs was developed to consider the pre-discharge time, the amount of spillway discharge, and to predict the reservoir lunar flow time according to the flood volume by frequency, thereby securing evacuation time in advance and reducing the risk of collapse. Based on one row of 200 mm diameter mobile siphons, the optimal pre-discharge time to secure evacuation time (about 1 hour) while maintaining 80% of the upper limit water level (about 30,000 m²) during a 30-year flood was analyzed to be 12 hours earlier. If the pre-discharge technology utilizing siphons for small and medium-sized old reservoirs and the algorithm for reservoir operation are implemented in advance in case of abnormal weather and the decision-making of managers is supported, it is possible to secure the safety of residents in the risk area of reservoir collapse, resolve the anxiety of residents through the establishment of a support system for evacuating residents, and reduce risk factors by providing risk avoidance measures in the event of a reservoir risk situation.

• Korean Journal of Ichthyology
• /
• v.36 no.2
• /
• pp.109-119
• /
• 2024

This study was conducted to investigate the early life history by observing the egg development of Ladislavia taczanowskii in endangered fish and to use it as basic data for species conservation research. The broodstork used in the study was secured from the area of the Hongcheon River in Hongcheon-gun, Gangwon State. The broodstork, who was being raised in the laboratory, selected mature individuals in May 2021 and induced them to spawn by hormone injection. The size of the maturation egg was 1.50~1.79 (average 1.59±0.08, n=30) mm due to the circular invasive egg. The incubation time took 168 hours at 16.5℃ and 109 hours and 30 minutes at 25.5℃. Newly hatched larvae, the consonants had a total length of 5.55~6.31 mm (6.30±6.93, n=30) mm, and the mouth and anus did not open and had egg yolk. 5 days after hatching, the preflexion larvae had a total length of 9.91~10.8 (10.1±0.27, n=30) mm, and the mouth and anus opened, and feeding activities began. 8 days after hatching, the flexion larvae had a total length of 10.3~11.4 (10.8±0.38, n=30) mm, and the end of the vertebrae at the tail fin tip began to bend upward. 10 day after hatching, the postflexion larvae had a total length of 11.8~13.1 (12.3±0.43, n=30) mm, and the end of the vertebrae at the tail tip was completely bent at 45°. 18 days after hatching, the total length of the juveniles was 18.9~23.4 (20.4±1.69, n=30) mm, and the number of fins in each part was fin rays with 10 dorsal fins, 9 anal fins, 22 caudal fins, and 7 ventral fins. As a result of the study, the postflexion larvae showed differences in morphology from other Gobioninae fishes in the upper part of the tail's hypural, the shape of spots on the dorsal vertebrae, the vertical stripes developed on the head, and the irregularly deposited melanophore throughout the body.

• Journal of the Korean Society of Radiology
• /
• v.84 no.1
• /
• pp.185-196
• /
• 2023

Purpose This study aimed to investigate radiomics analysis of ultrasonographic images to develop a potential biomarker for predicting lymph node metastasis in papillary thyroid carcinoma (PTC) patients. Materials and Methods This study included 431 PTC patients from August 2013 to May 2014 and classified them into the training and validation sets. A total of 730 radiomics features, including texture matrices of gray-level co-occurrence matrix and gray-level run-length matrix and single-level discrete two-dimensional wavelet transform and other functions, were obtained. The least absolute shrinkage and selection operator method was used for selecting the most predictive features in the training data set. Results Lymph node metastasis was associated with the radiomics score (p < 0.001). It was also associated with other clinical variables such as young age (p = 0.007) and large tumor size (p = 0.007). The area under the receiver operating characteristic curve was 0.687 (95% confidence interval: 0.616-0.759) for the training set and 0.650 (95% confidence interval: 0.575-0.726) for the validation set. Conclusion This study showed the potential of ultrasonography-based radiomics to predict cervical lymph node metastasis in patients with PTC; thus, ultrasonography-based radiomics can act as a biomarker for PTC.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.14 no.4
• /
• pp.213-228
• /
• 2009

This study was conducted to investigate spatio-temporal changes in macrobenthic community structure and benthic environmental conditions in Geoje-Hansa Bay, which is the greatest oyster producing site in Korea. Field survey for benthic environment and macrobenthos was seasonally carried out at 15 stations covering oyster farming sites and non-farming sites from February to November, 2008. The grain size of surface sediments was dominated by very fine silt with the mean phi of about $9\;{\Phi}$ and TOC was 1.9% on average. Mean dissolved oxygen content was 8.1 mg/L and lowest in August corresponding to the 2nd degree in seawater quality criteria. Total species number was 351 and mean density was $3,675\;ind./m^2$, both of which were dominated by polychaete worms. Spatio-temporal variation in above two biological variables was great with higher values seasonally in spring and spatially in channels rather than inner bay. Dominant species were Lumbrineris longifolia (21.3%), Aphelochaeta monilaris (17.8%) and Ericthonius pugnax(6.1%), all of which are typical species of organically enriched area. From the multivariate analyses, the whole macrobenthic community was distinguished into two groups of channel and inner bay group. Spatio-temporal changes of macrobenthic community in Geoje-Hansan Bay were related to those of TOC and acid volatile sulfide (AVS). Our results showed that Geoje-Hansan Bay should be intermediately affected by organic pollution, and that such organic enrichment was more remarkable at farming stations in the inner bay.