• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.390-395
• /
• 1999

Ocean Scanning Multispectral Imager (OSMI) is a payload on the Korean Multi-purpose SATellite (KOMPSAT) to perform worldwide ocean color monitoring for the study of biological oceanography KOMPSAT will be launched in the middle of November this year. The radiometric performance of OSMI is analyzed for various gain settings in the viewpoint of the instrument developer for OSMI calibration and application based on its ground performance measurement data for 8 primary spectral bands of OSMI. The radiometric response linearity and dynamic range are analyzed for the image radiometric calibration and the estimation of OSMI image quality for the ocean remote sensing area. The dynamic range is compared with the nominal input radiance for the ocean and the land. The noise equivalent radiance (NER) corresponding to the instrument radiometric noise is compared with the radiometric resolution of signal digitization (1-count equivalent radiance). The best gain setting of OSMI for ocean monitoring is recommended. This analysis is considered to be useful for the OSMI mission and operation planning, the OSMI image data calibration, and users' understanding about OSMI image quality.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.531-533
• /
• 2007

We report and discuss molecular and isotopic properties of hydrate-bound gases from 55 samples and void gases from 494 samples collected during Ocean Drilling Program (ODP) Leg 204 at Hydrate Ridge offshore Oregon. Gas hydrates appear to crystallize in sediments from two end-member gas sources (deep allochthonous and in situ) as mixtures of different proportions. In an area of high gas flux at the Southern Summit of the ridge (Sites 1248-1250), shallow (0-40 meters below the seafloor (mbsf)) gas hydrates are composed of mainly allochthonous mixed microbial and thermogenic methane and a small portion of thermogenic C2+ gases, which migrated vertically and laterally from as deep as 2-2.5 km depths. In contrast, deep (50-105 mbsf) gas hydrates at the Southern Summit (Sites 1248 and 1250) and on the flanks of the ridge (Sites 1244-1247) crystallize mainly from microbial methane and ethane generated dominantly in situ. A small contribution of allochthonous gas may also be present at sites where geologic and tectonic settings favor vertical gas migration from greater depth (e.g., Site 1244).

• Journal of Computing Science and Engineering
• /
• 제7권3호
• /
• pp.159-167
• /
• 2013

Creativity is a long cherished and widely studied aspect of human behavior that allows us to re-invent the familiar, and to imagine the new. Computational creativity (CC) is a newly burgeoning area of creativity research that brings together academics and practitioners from diverse disciplines, genres and modalities, to explore the potential of computers to be autonomously creative, or to collaborate as co-creators with people. We describe here an architecture for creative Web services that will act as a force magnifier for CC, both for academic research, and for the effective deployment of real CC applications in industry. For researchers, this service-oriented architecture supports the pooling of technologies in a robust interoperable framework, in which CC models are conceived, developed and migrated from lab settings to an industrial strength platform. Industry developers, for their part, will be able to exploit novel results of CC research in a robust, low-risk form, without having to re-implement algorithms from a quickly moving field. We illustrate the architecture with the first of a growing set of creative Web services that provide robust figurative language processing on demand.

• 아동학회지
• /
• 제30권4호
• /
• pp.69-85
• /
• 2009

The purpose of this study was to identify developmental trajectories of externalizing problems in preschoolers and to investigate dimensions of temperament and parental behaviors associated with trajectory groups. Subjects were 180 3- to 5-year-old preschoolers (96 males, 84 females) in the metropolitan area of Seoul. They were assessed three times at 5 month intervals over a one year period. Teachers reported on children's behavior problems, and parents reported on children's temperaments. Latent Growth Curve Modeling Analysis with cohort sequential design revealed externalizing behaviors gradually decreased between 3 and 6. At the 6-year-old level externalizing behaviors were associated with high novelty seeking temperament. The results were discussed in terms of the importance of longitudinal research in developmental psychopathology.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.816-822
• /
• 2010

A comprehensive review for the selection of urban rail vehicle systems that best suit Gimpo railway line is taking place with consideration of the project area characteristics in light of line planning, passenger demand, supply of rolling stock, and railway construction and operation. Various aspects of vehicle systems including passenger demand on concerned lines, regional characteristics, vehicle types, and railway construction and operational settings should be taken into consideration. In addition, request for the introduction of customized vehicle systems reflecting the convenience of transit users such as wide and hospitable inner space, low noise, flexible operation of 2 to 4 car train-set and eye catching slim bridge piers is increasing. A study on alternatives to place an order to opt for optimum rolling stock systems considering line characteristics of Gimpo City's urban railway and future passenger demand while meeting the needs of Gimpo City has been conducted.

• Communications for Statistical Applications and Methods
• /
• 제24권1호
• /
• pp.43-65
• /
• 2017

We propose a flexible cure rate survival model by assuming that the number of competing causes of the event of interest has the Poisson distribution and the time for the event follows the gamma-G family of distributions. The extended family of gamma-G failure-time models with long-term survivors is flexible enough to include many commonly used failure-time distributions as special cases. We consider a frequentist analysis for parameter estimation and derive appropriate matrices to assess local influence on the parameters. Further, various simulations are performed for different parameter settings, sample sizes and censoring percentages. We illustrate the performance of the proposed regression model by means of a data set from the medical area (gastric cancer).

• 품질경영학회지
• /
• 제27권2호
• /
• pp.218-236
• /
• 1999

The purpose of parameter design is to determine optimal settings of design parameters of a product or a process such that the performance characteristics of a product exhibit small variabilities around their target values. Taguchi made significant contributions in this area. However, his analysis of the problem focused on only one performance characteristic or response, although in product and process design, multiple characteristics are more common. The critical problem in dealing with multiple characteristics is how to compromise the conflict among the selected levels of the design parameters for each individual characteristic. In this paper, Methodology using SN ratio optimized by univariate technique is proposed and a parameter design procedure to achieve the optimal balance among several different response variables is developed. Existing case studies are solved by the proposed method and the results are compared with ones by the sum of SN ratios, the expected weighted loss, the desirability function, and EXTOPSIS model.

• 한국주거학회논문집
• /
• 제22권3호
• /
• pp.83-91
• /
• 2011

The aim of this study was to determine the basic perception of Kleingarten house planning of Jeonbuk area. The survey method was used for data collection. The major finding were as follows: 1) Almost all respondents have a very positive attitude the participant of Kleingarten. Many respondents wanted the cheapest price for the Kleingarten rental fee and for the travel time between their home and Kleingarten to be under an hour. 2) Two different size of 45 and 66 $m^2$ were preferable for the house floor plans. The most preferable floor plan type chosen by the respondents was a house design with a terrace and the elderly householders especially preferred a house floor plan with an LDK design. 54.3 per cent respondents liked the log house and 93.3 per cent respondents liked the eco-friendly building materials such as wood, earth (Korean natural earth: whangto), and adobe bricks etc. 3) There were more needs for useful facilities such as a pergola, a grassy lawn, small ponds, a playground for the childrens, patio table settings, etc.

• 한국조경학회지
• /
• 제24권2호
• /
• pp.52-61
• /
• 1996

Almost every national parks in the world have problems in their own way. The centennial history of national park itself was that of problem solving. Various attempts and testing have done. A successful example of national park is, however, hardly find out till today except for several western countries. Internationally, the socio-economic approach has become a main stream. However, this approach has resulted into a natural degradation of large-scale as well as in the Third world countries and Korea. The other stream in this area has cultural aspects. The way which decreasing socio-economic conflicts and pursuing solutions by the cultural approach to the problems gives good consequences in the national parks of western europe. The different settings like Korea which have amounts of cultural differences, in contrast with U.S.A. the birthplace of national parks, this way should suggest new possibilities too.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.392-397
• /
• 2001

This paper concerns on modal analysis of mechanical structures by using a continuous scanning laser Doppler vibrometer. In modal analysis the Hilbert transform based approach is superior to the Fourier transform based approach because of its fine accuracy and its flexible experimental settings. In this paper the Hilbert transform based approach is extended to measure area mode shape data of a structure by simply modifying the scanning pattern ranging the entire surface of the structure. The effectiveness of this proposed method is illustrated along with results of numerical simulation for a rectangular plate.