• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.55-64
• /
• 2003

Desiccation of a soil is basically the removal of water by evaporation, which is controlled by evaporativity and evaporability. Surface evaporation improves the trafficability which is essential for the access of construction equipment in the area reclaimed with soft clay. The existing traditional methods for evaluating evaporation can not account for the deformation of reclaimed soft soils during evaporation. Therefore, a theoretical model for predicting the rate of evaporation from the surface of a deformable material is proposed. The model is based on a system of equations for coupled heat and mass transfer in unsaturated soils. The modified pressure plate extractor test and glass desiccator test were carried out to obtain the soil-water characteristic curve for a deformable soil. The column drying test was conducted to investigate one dimensional water flow, heat flow and evaporation in the surface. A finite difference program was developed to solve the coupled nonlinear partial differential equations, which permit the study of water, vapor and heat flows in the deformable soil. Comparison between measured and simulated values shows a reasonably good matching between the two.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.1
• /
• pp.41-45
• /
• 2016

The technology of supplying the electric power by wireless power transfer (WPT) is expected for the next generation power feeding system since it can supply the power to portable devices without any connectors through large air gap. As such a technology based on strongly coupled electromagnetic resonators is possible to deliver the large power and recharge them seamlessly; it has been considered as a noble option to wireless power charging system in the various power applications. Recently, various HTS wires have now been manufactured for demonstrations of transmission cables, motors, MAGLEV, and other electrical power components. However, since the HTS magnets have a lower index n value intrinsically, they are required to be charged from external power system through leads or internal power system. The portable area is limited as well as the cryogen system is bulkier. Thus, we proposed a novel design of wireless power charging system for superconducting HTS magnet (WPC4SM) based on resonance coupling method. As the novel system makes possible a wireless power charging using copper resonance coupled coils, it enables to portable charging conveniently in the superconducting applications. This paper presented the conceptual design and operating characteristics of WPC4SM using different shapes' copper resonance coil. The proposed system consists of four components; RF generator of 370 kHz, copper resonance coupling coils, impedance matching (IM) subsystem and HTS magnet including rectifier system.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.26-28
• /
• 2007

The motion estimation is the most important technique in the image compression of the video standards. In the case of next generation standards in the video codec as H.264, a high compression-efficiency can be also obtained by using a motion compensation. To obtain the accurate motion search, a motion estimation should be achieved up to 1/2 pixel and 1/4 pixel uiuts. To do this, the computational complexity is increased although the image compression rate is increased. Therefore, in this paper, we propose the advanced sub-pixel block matching algorithm to reduce the computational complexity by using a statistical characteristics of SAD(Sum of Absolute Difference). Generally, the probability of the minimum SAD values is high when searching point is in the distance 1 from the reference point. Thus, we reduced the searching area and then we can overcome the computational complexity problem. The main concept of proposed algorithm, which based on TSS(Three Step Search) method, first we find three minimum SAD points which is in integer distance unit, and then, in second step, the optimal point is in 1/2 pixel unit either between the most minimum SAD value point and the second minimum SAD point or between the most minimum SAD value point and the third minimum SAD point In third step, after finding the smallest SAD value between two SAD values on 1/2 pixel unit, the final optimized point is between the most minimum SAD value and the result value of the third step, in 1/2 pixel unit i.e., 1/4 pixel unit in totally. The conventional TSS method needs an eight.. search points in the sub-pixel steps in 1/2 pixel unit and also an eight search points in 1/4 pixel, to detect the optimal point. However, in proposed algorithm, only total five search points are needed. In the result. 23 % improvement of processing speed is obtained.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.55-61
• /
• 2005

Digital Elevation Model (DEM) generation from remotely sensed imagery is crucial for a variety of mapping applications such as ortho-photo generation, city modeling. High resolution imaging satellites such as SPOT-5, IKONOS, QUICK-BIRD, ORBVIEW constitute an excellent source for efficient and economic generation of DEM data. However, prerequisite knowledge in the areas of sensor modeling, epipolar resampling, and image matching is required to generate DEM from these high resolution satellite imagery. From the above requirements, epipolar resampling emerges as the most important factors. Research attempts in this area are still in high demand and short supply. Another cause that adds to the complication of the problem is that most studies of DEM generation from IKONOS scenes have been based on rational function model. In this paper, we proposed a new methodology for DEM generation from satellite scenes using parallel projection model which is sensor independent, makes it possible for sensor modeling and epipolar resampling by only few control points. The performance and feasibility of the developed methodology is evaluated through real dataset captured by IKONOS.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.101-108
• /
• 2011

Construction of the Jangbogo antarctic station was planned, and it requires detailed information on topography of the area around the station. The purpose of this research is to generate the topographic map to construct the Jangbogo antarctic station using the satellite image. To do this, surveying and pre-test of equipment were conducted. In addition, for sensor modeling of the GeoEye-1 satellite image, RPC-bias correction was done, and it showed that at least two control points are required. In generating the map, a 1/2,500 scale was deemed suitable in consideration of resolution of the image and the fact that supplementary topographic surveying would be impossible. In order to provide detailed information on the topography around the Jangbogo station, the digital elevation model based on image matching was created, and compared with GPS-RTK data, accuracy of vertical location about 0.6m was exhibited.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.7
• /
• pp.1137-1148
• /
• 2008

The purposes of this study were to investigate the differences in clothing consumption behaviors among female consumer groups in their twenties and to understand the type of consumer group pursuing fast fashion. Questionnaire survey was conducted to 230 female consumers residing in Seoul and Kyung Gi area from June 18 to 29 in 2007, and 178 were used for data analysis. Data analysis were conducted with SPSS 12 program on the reliability test, factor analysis, cluster analysis, correlation analysis, ANOVA, Duncan's multiple range test. Factors analyses were employed for the attitude toward fashion and shopping, and shopping motives. Four factors were formulated for the attitude toward fashion: interest in fashion, fashion-orientation, fashion leadership and fashion conformity. Six factors for the attitude toward shopping were found: information searching, shopping enjoyment, store patronage, impulse buying, brand-orientation and convenience. Buying motives for fashion goods were classified into 3 factors: for matching & occasion, to-be-in-fashion and for necessity. Four clusters were identified based on the attitude toward fashion: the fashion-interested, the fashion-indifferent, fashion leaders and the individuality-oriented. Among the groups, significant differences were found in information searching, shopping enjoyment and store patronage. Fashion leaders tended to spend more for expensive and up-to-dated fashion items, and for higher quantity than other groups. Consequently fashion leaders showed attractive customer characteristics for the fast fashion companies.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.3
• /
• pp.221-227
• /
• 2016

As described in the previous paper (Park et al. 2013), the detector subsystem of optical wide-field patrol (OWL) provides many observational data points of a single artificial satellite or space debris in the form of small streaks, using a chopper system and a time tagger. The position and the corresponding time data are matched assuming that the length of a streak on the CCD frame is proportional to the time duration of the exposure during which the chopper blades do not obscure the CCD window. In the previous study, however, the length was measured using the diagonal of the rectangle of the image area containing the streak; the results were quite ambiguous and inaccurate, allowing possible matching error of positions and time data. Furthermore, because only one (position, time) data point is created from one streak, the efficiency of the observation decreases. To define the length of a streak correctly, it is important to locate the endpoints of a streak. In this paper, a method using a differential convolution mask pattern is tested. This method can be used to obtain the positions where the pixel values are changed sharply. These endpoints can be regarded as directly detected positional data, and the number of data points is doubled by this result.

• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.527-533
• /
• 2015

This study performed an on-site demonstration of the topographic surveying technique at a large-scale open-pit limestone mine in Korea using a fixed-wing unmanned aerial vehicle (UAV, Drone, SenseFly eBee). 288 sheets of aerial photos were taken by an automatic flight for 30 minutes under conditions of 300 m altitude and 12 m/s speed. Except for 37 aerial photos in which no keypoint was detected, 251 aerial photos were utilized for data processing including correction and matching, then an orthomosaic image and digital surface model with 7 cm grid spacing could be generated. A comparison of the X, Y, Z-coordinates of 4 ground control points measured by differential global positioning system and those determined by fixed-wing UAV photogrammetry revealed that the root mean squared errors were around 15 cm. Because the fixed-wing UAV has relatively longer flight time and larger coverage area than rotary-wing UAVs, it can be effectively utilized in large-scale open-pit mines as a topographic surveying tool.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.2
• /
• pp.153-162
• /
• 2012

In this paper, we propose a new shape similarity measure for M:N polygon pairs regardless of different object cardinalities in the pairs. The proposed method compares the projections of two shape functions onto Zernike polynomial basis functions, where the shape functions were obtained from each overall region of objects, thus not being affected by the cardinalities of object pairs. Moments with low-order basis functions describe global shape properties and those with high-order basis functions describe local shape properties. Therefore several moments up to a certain order where the original shapes were similarly reconstructed can efficiently describe the shape properties thus be used for shape comparison. The proposed method was applied for the building objects in the New address digital map and a car navigation map of Seoul area. Comparing to an overlapping ratio method, the proposed method's similarity is more robust to object cardinality.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2072-2078
• /
• 2011

In photovoltaic(PV) system, for obtaining maximum efficiency of solar power systems, the solar tracking system must be controlled to match position of the sun. In this paper, we design the solar tracking system to track movement of the sun using CdS sensor modules and to determine direction of the sun under shadow of directions. In addition, for an intelligent computation in tracking of the sun, a fuzzy controller is allocated to space avaliable for splitting area of fuzzy part for the fuzzy input space(grid-type fuzzy partition) in which a fuzzy grid partition divides fuzzy rules bases. As well, a simple model of solar tracking system is designed by two-axis motor control systems and the 8-direction sensor module that can measure shadow from CdS sensor modules by matching of axis of CdS modules and PV panels. We demonstrate this systems is effective for fixed location and moving vessels and our fuzzy controller can track the satisfactorily.