• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.302-307
• /
• 2002

In end milling process, the undeformed chip section area and cutting forces vary periodically with phase change of the tool. However, the real undeformed chip section area deviates from the geometrically ideal one owing to cutter runout and tool shape error. In this study, a method of estimating the real undeformed chip section area which reflects cutter runout and tool shape error was presented during up-end milling of Inconel 718 using measured cutting forces. The specific cutting resistance, K. and $K_t$ are defined as the radial and tangential cutting forces divided by the modified chip section area. Both of $K_r$, and $K_t$ values become smaller as the helix angle increases from $30^\circ$ to $40^\circ$ Whereas they become larder as the helix angle increases from $40^\circ$ to $50^\circ$. On the other hand, the $K_r$, and $K_t$ values show a tendency to decrease with increase of the modified chip section area and this tendency becomes distinct with smaller helix angle.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.63-70
• /
• 2002

In end milling process, the undeformed chip section area and cutting forces vary periodically with phase change of the tool. However the real undeformed chip section area deviates from the geometrically ideal one owing to cutter runout and tool shape error. In this study, a method of estimating the real undeformed chip section area which reflects cutter runout and tool shape error was presented in up end milling process using measured cutting forces. The average specific cutting resistance, Ka is defined as the main cutting force component divided by the modified chip section area. Ka value becomes smaller as the helix angle increases from $30^circC \;to\;40\circC$. But it becomes larger as the helix angle increases from $40^\circ$to 50 . On one hand, the Ka value shows a tendency to decrease with increase of the modified chip section area and this tendency becomes distinct with smaller helix angle.

• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.45-52
• /
• 2002

In an end milling process, the undeformed chip section area and cutting forces vary periodically with the phase change of the tool. However, the real undeformed chip section area deviates from the geometrically ideal one owing to the cutter runout and tool shape error. In the current study, a method of estimating the real undeformed chip section area which reflects the cutter runout and tool shape error is presented during up-end milling processes of Inconel 718. The specific cutting forces, $K_r$ and $K_t$ are defined as the radial and tangential cutting forces divided by the modified chip section area, respectively. Both of the $K_{r}$ and $K_t$ values become smaller as the helix angle increases from $30^{\circ}$ to $40^{\circ}$. Whereas they become larger as the helix angle increases from $40^{\circ}$ to $50^{\circ}$. The $K_r$ and $K_t$ values show a tendency to decrease with increase of the modified chip section area.a.

• 한국음향학회지
• /
• 제20권6호
• /
• pp.9-16
• /
• 2001

본 논문에서는 음파를 이용하여 덕트 내 길이 방향으로의 불균일 단면적을 역문제적으로 측정하는 방법에 대해서 연구하였다. 음파를 사사용하여 덕트 단면적을 구하는 이론 및 실험방법 등에 대해서 많은 연구가 되어왔으나, 본 연구에서는 덕트 내 충격응답을 구하고 이를 재구성 알고리즘에 대입하여 덕트 내 단면적을 구하는 방법을 채택하였다. 충격 가진을 통하여 덕트 내 충격응답을 구하는 기존 방법의 문제점을 살펴보았고, 광대역 가진 방법을 새로 제안하였다. 실험 및 이론적 고찰을 통하여 새로운 방법이 기존의 방법보다 면적 재구성 오차가 적음을 보였다. 덕트 단면적을 재구성 할 때의 오차 원인과 불규칙 잡음에 의한 오차범위를 파악하기 위하여 오차해석을 수행하여 음파를 이용한 면적 재구성 방법의 적용범위 및 대상을 명확히 하였다.

• 대한공간정보학회지
• /
• 제14권3호
• /
• pp.23-30
• /
• 2006

임야지역은 지역적 특성상 토탈스테이션, RTK-GPS 측량 등의 지상측량 방법으로는 지적재조사 측량에 한계성이 있다. 그렇기 때문에 기존 지적재조사 측량 방법들로 제안되고 있는 방식과는 다른 새로운 방법들이 모색되어야 할 필요성이 있다. 본 연구에서는 임야지역을 효율적으로 재조사할 수 있는 방법으로서 현재 KLIS에서 이용되고 있는 임야도 전산파일의 이용가능성을 제시하고자 하였다. 연구결과 가장 중요한 면적오차는 대체적으로 오차범위 이내의 성과를 보였다. 따라서 위치경계선 조정을 위한 현황 참조 데이터와 KLIS 데이터를 연계하여 이용한다면 향후 지적재조사시에 충분한 활용가능성이 있는 것으로 나타났다.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권2호
• /
• pp.71-81
• /
• 2014

Time synchronization system using dual frequency bands is designed and the error sources are analyzed for alternative synchronized-pseudolite navigation system (S-PNS) which aims at military application. To resolve near/far problem, dual frequency band operation is proposed instead of pulsing transmission which degrades level of reception. In dual frequency operation H/W delay should be considered to eliminate errors caused by inter-frequency bias (IFB) difference between the receivers of the pseudolites and users. When time synchronization is performed across the sea, multipath error is occurred severely since the elevation angle between pseudolites is low so total reflection can be happened. To investigate the difference of multipath effects according to location, pseudolites are set up coastal area and land area and performances are compared. The error source related with tropospheric delay is becoming dominant source as the coverage of the PNS is broadening. The tropospheric delay is measured by master pseudolite receiver directly using own pseudorange and slave pseudorange. Flight test is performed near coastal area using S-PNS equipped with developed time synchronization system and test results are also presented.

• ETRI Journal
• /
• 제30권4호
• /
• pp.506-515
• /
• 2008

The H.264/AVC standard has adopted new coding tools such as intra-prediction, variable block size, motion estimation with quarter-pixel-accuracy, loop filter, and so on. The adoption of these tools enables an H.264/AVC-coded bitstream to have more information than was possible with previous standards. In this paper, we propose an effective spatial error concealment method with low complexity in H.264/AVC intra-frame. From information included in an H.264/AVC-coded bitstream, we use prediction modes of intra-blocks to recover a damaged block. This is because the prediction direction in each prediction mode is highly correlated to the edge direction. We first estimate the edge direction of a damaged block using the prediction modes of the intra-blocks adjacent to a damaged block and classify the area inside the damaged block into edge and flat areas. Our method then recovers pixel values in the edge area using edge-directed interpolation, and recovers pixel values in the flat area using weighted interpolation. Simulation results show that the proposed method yields better video quality than conventional approaches.

• 대한인간공학회지
• /
• 제35권6호
• /
• pp.569-580
• /
• 2016

Objective: This study aims to identify the most effective keyboard layout in the area of performance for securing usability in a smart watch-using environment and to verify the usability of touch keyboard calibrated by hand. Background: It is necessary to understand the environmental characteristics in using the smart watch and to secure the usability of touch keyboard based on this understanding in order to take account of the users who use the touch screen in the extreme input conditions caused by the small screen of a smart watch. Method: 30 participants in this study were required to input characters using the QWERTY keyboard and 3x4 keypad (Naratgul, Chunjiin), which were familiar with them, in order to grasp the keyboard layout suitable in the smart watch- using environment; the performance (error rate, performance time) of this case was measured. In addition, 30 participants in this study were required to input the characters setting the QWERTY keyboard with calibrated touch area and the one with uncalibrated touch area, based on the characteristics of touch behavior, by finger typing the keyboard, with the performance (error rate and performance time) of this case measured. Results: QWERTY keyboard (93.3sec) is found to be 31.2% faster than Naratgul keyboard, a kind of 3x4 keypad, and 43.6% faster than Chunjiin keyboard, in the area of efficiency, in the results of the usability evaluation regarding the keyboard layout. QWERTY keyboard with calibrated touch area (7.5%) is found to be 23.5% improved compared to the QWERTY keyboard with uncalibrated touch area (9.8%) in the area of accuracy (error rate). The results of the usability evaluation regarding the QWERTY keyboard with touch area calibrated by finger typing the keyboard and QWERTY keyboard with calibrated touch area (80.7sec) is found to be 5.7% improved compared to QWERTY keyboard with uncalibrated touch area (85.6sec) in the area of efficiency (performance time). Conclusion: QWERTY keyboard is found to have an effective layout in the area of efficiency in the smart watch-using environment, and its improved usability is verified in the areas of accuracy and efficiency in the QWERTY keyboard with a touch area calibrated by finger typing the keyboard. Application: The results of this study may be used to set up the basic touch keyboard of the smart watch. The input usability is expected to secure the smart watch-using environment, which is an extreme input condition by applying QWERTY keyboard with touch area calibrated by finger typing the keyboard.

• 제어로봇시스템학회논문지
• /
• 제8권12호
• /
• pp.1067-1075
• /
• 2002

The system error model for the compensation of the low-cost personal navigation system is derived and the error compensation method using GPS is also proposed. The walking navigation system (WNS) that calculates navigation information through walking detection has small error than INS, but the error also increases with time. In order to improve reliability of the system regardless of time, WNS is integrated with GPS. Since WNS is usually used in urban area, the blockage of CPS signal is frequently occurred. Therefore tightly coupled Kalman filter is used for the integration of WNS and GPS. In this paper, the system model for the design of tightly coupled Kかm filter is designed and measurement is linearized in consideration of moving distance error. It is shown by Monte Carlo simulation that the error is bounded even through the number of visible satellite is less than 4.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.126-134
• /
• 1999

In this paper, a new error compensating technique for form-error compensation of rough-surface profile obtained by contact stylus profilometer is proposed. By the method, the real contact points of rough-surface and diamond stylus can be estimated and the measured profile data corrected. To verify the compensation effect, the properties(Ra, RMS, Kurtosis, Skewness) of measured profile data and compensated data were compared. And, the cumulative RMS slope was proposed to assess the compensated effect of upper area of profile. The results show that the measuring error could be compensated very well in amplitude parameters and in proposed cumulative RMS slope by the developed form-error compensating technique.