• 한국콘텐츠학회논문지
• /
• 제18권1호
• /
• pp.465-475
• /
• 2018

최근 소셜 미디어, IoT 등에 대한 활용이 증가됨에 따라 대용량의 그래프 스트림이 생성되고 있으며 그래프 스트림을 실시간으로 처리하기 위한 많은 연구들이 진행되고 있다. 본 논문에서는 그래프가 지속적으로 변경될 때 이전 결과 데이터를 재사용하는 점진적인 그래프 스트림 처리 기법을 제안한다. 또한, 점진적 처리와 정적인 처리를 선택적으로 수행하기 위한 비용 모델을 제안한다. 제안하는 비용 모델은 실제 처리된 이력을 바탕으로 재계산 영역의 탐색 비용 및 처리 비용의 예측 값을 계산하여 점진적 처리가 정적인 처리보다 이득인 경우 점진적 처리를 수행한다. 제안하는 점진적 처리는 그래프 갱신이 발생하면 변경되는 부분만을 처리하여 효율성을 증가시킨다. 또한, 변경되는 부분의 이전 결과 데이터만을 수집하여 점진적인 처리를 수행함으로써 디스크 I/O 비용을 감소시킨다. 다양한 성능평가를 통해 제안하는 기법이 기존 기법에 비해 성능이 우수함을 보인다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.372-375
• /
• 2004

The UV radiometer payload was launched successfully from the west coastal area of Korea Peninsula aboard KSR-III on 28, Nov 2002. KSR-III was the Korean third generation sounding rocket and was developed as intermediate step to larger space launch vehicle with liquid propulsion engine system. UV radiometer onboard KSR-III consists of UV and visible band optical phototubes to measure the direct solar attenuation during rocket ascending phase. For UV detection, 4 channel of sensors were installed in electronics payload section and each channel has 255, 290, 310nm center wavelengths, respectively. 450nm channel was used as reference for correction of the rocket attitude during the flight. Transmission characteristics of all channels were calibrated precisely prior to the flight test at the Optical Lab. in KARI (Korea Aerospace Research Institute). During a total of 231s flight time, the onboard data telemetered to the ground station in real time. The ozone column density was calculated by this telemetry raw data. From the calculated column density, the vertical ozone profile over Korea Peninsula was obtained with sensor calibration data. Our results had reasonable agreements compared with various observations such as ground Umkhr measurement at Yonsei site, ozonesonde at Pohang site, and satellite measurements of HALOE and POAM. The sensitivity analysis of retrieval algorithm for parameters was performed and it was provided that significant error sources of the retrieval algorithm.

• 한국철도학회논문집
• /
• 제19권5호
• /
• pp.585-591
• /
• 2016

최근 IoT환경에서 다양한 위치기반의 서비스의 확산으로 인해 실내측위는 중요한 영역으로 자리잡고 있다. 이에 본 논문에서는 특정 공간에 시설물, 서비스 등을 고려한 가상의 영역을 Zone으로 설정하였고, 다층퍼셉트론(MLP: Multi-Layer Perceptron)을 사용하여 Zone을 인식하는 방법을 제안하였다. 제안방법의 다층퍼셉트론은 입력으로 BLE(Bluetooth Low Energy) Beacon의 RSSI(Received Signal Strength Indicator)신호를 입력으로 활용하였고 현재 위치의 소속된 Zone을 출력하였다. 제안방법의 검증을 위해서 실제 역사와 유사한 크기의 실험환경을 구축하였으며 4개의 Beacon을 설치하였고 2개의 Zone영역을 설정하였다.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1143-1153
• /
• 2015

In this paper, we propose an efficient architecture for a real-time image stitching engine for vision SoCs found in motor vehicles. To enlarge the obstacle-detection distance and area for safety, we adopt panoramic images from multiple telegraphic cameras. We propose a stitching method based on a fixed homography that is educed from the initial frame of a video sequence and is used to warp all input images without regeneration. Because the fixed homography is generated only once at the initial state, we can calculate it using SW to reduce HW costs. The proposed warping HW engine is based on a linear transform of the pixel positions of warped images and can reduce the computational complexity by 90% or more as compared to a conventional method. A dual-core SW/HW image stitching engine is applied to stitching input frames in parallel to improve the performance by 70% or more as compared to a single-core engine operation. In addition, a dual-core structure is used to detect a failure in state machines using rock-step logic to satisfy the ISO26262 standard. The dual-core SW/HW image stitching engine is fabricated in SoC with 254,968 gate counts using Global Foundry's 65 nm CMOS process. The single-core engine can make panoramic images from three YCbCr 4:2:0 formatted VGA images at 44 frames per second and frequency of 200 MHz without an LCD display.

• 제어로봇시스템학회논문지
• /
• 제18권10호
• /
• pp.970-976
• /
• 2012

In this paper, a single LRF has been used to produce a 3D map for the mobile robot navigation. The 2D laser scanners are used for mobile robots navigation, where the laser scanner is applied to detect a certain level of area by the straight beam. Therefore it is limited to the usages of 2D obstacle detection and avoidance. In this research, it is designed to complement a mobile robot system to move up and down a single LRF along the yaw axis. During the up and down motion, the 2D data are stacked and manipulated to build a 3D map. Often a single LRF data are mixed with Gaussian and impulse noises. The impulse noises are removed out by the hybrid median filter designed in this research. The 2D data which are improved by deleting the impulse noises are layered to build the 3D map. Removing impulse noises while preserving the boundary is a main advantages of the hybrid median filter which has been used widely to improve the quality of images. The effectiveness of this hybrid median filter for rejecting the impulse noises has been verified through the real experiments. The performance of the hybrid median filter is evaluated in terms of PSNR (Peak Signal to Noise Ratio) and the processing time.

• 한국동물위생학회지
• /
• 제35권2호
• /
• pp.133-137
• /
• 2012

Brucellosis, a bacterial zoonoses caused by the genus Brucella is responsible for abortion and infertility in cow. Brucellosis is causing economic loss in dairy industries and prevalent worldwide including Bangladesh but limited studies are devoted to determine the prevalence and its association with reproductive factors of dairy cows in Bangladesh. Therefore, the present study was conducted to determine the seroprevalence of brucellosis in dairy cattle using screening test Rose Bengal test (RBT) and the positive sera were further confirmed by indirect- ELISA. For this purpose, a total of 400 serum samples from dairy cows with history of abortion and various reproductive disorders were collected from the Kurigram district of Bangladesh for the detection of Brucella antibody. The overall prevalence of brucellosis in dairy cattle was 2.25%. Brucellosis in cases of abortion and repeat breeding was 8.3% and 2.8%, respectively. The results shows higher prevalence of brucellosis in cases of abortion followed by repeat breeding, while there was no seropositive cases from other reproductive disorders. Age-wise sero-prevalence was found 3.0% in 2~3 years age group and 2.0% in 4~8 years age group. The prevalence of brucellosis in indigenous and cross-bred cattle was 3.6% and 1.7%, respectively. All the animals detected positive to brucellosis by RBT were not found to be positive by i-ELISA. However, the RBT might be a suitable screening test for the diagnosis of Brucella infection in field condition in Bangladesh. These data will help to develop effective disease prevention strategies.

• 한국환경과학회지
• /
• 제19권1호
• /
• pp.27-37
• /
• 2010

A system coupled the prognostic WRF mesoscale model and CALMET diagnostic model has been employed for predicting high-resolution wind field over complex coastal area. WRF has three nested grids down to from during two days from 24 August 2007 to 26 August 2007. CALMET simulation is performed using both initial meteorological field from WRF coarsest results and surface boundary condition that is Shuttle Radar Topography Mission (SRTM) 90m topography and Environmental Geographic Information System (EGIS) 30m landuse during same periods above. Four Automatic Weather System (AWS) and a Sonic Detection And Ranging (SODAR) are used to verify modeled wind fields. Horizontal wind fields in CM_100m is not only more complex but better simulated than WRF_1km results at Backwoon and Geumho in which there are shown stagnation, blocking effects and orographically driven winds. Being increased in horizontal grid spacing, CM_100m is well matched with vertically wind profile compared SODAR. This also mentions the importance of high-resolution surface boundary conditions when horizontal grid spacing is increased to produce detailed wind fields over complex terrain features.

• 치과방사선
• /
• 제25권2호
• /
• pp.363-373
• /
• 1995

The aim of this study was to evaluate and compare observer performance between conventional radiographs and their digitized images for the detection of bone loss in the bifurcation of mandiblar first molar. One dried human mandible with minimal periodontal bone loss around the first molar was selected and serially enlarged 17 step defects were prepared in the bifurcation area. The mandible was radiographed with exposure time of 0.12, 0.20, 0.25, 0.32, 0.40, 0.64 seconds, after each successive step in the preperation and all radiographs were digitized with IBM-PC/32 bit-Dx compatible, video camera (VM-S8200, Hitachi Co., Japan), and color monitor(Multisync 3D, NEC, Japan). Sylvia Image Capture Board for the ADC(analog to digital converter) was used. The obtained results were as follows: 1. In the conventional radiographs, the mean score of the readability was higher at the condition of exposure time with 0.32 second. Also, as the size of artificial lesion was increased, the readability of radiographs was elevated (P<0.05). 2. In the digital images, the mean score of the readability was higher at the condition of exposure time with 0.40 second. Also, as the size of artificial lesion was increased, the readability of digital images was elevated(P<0.05). 3. At the same exposure time, the mean scores of readibility were mostly higher in the digitized images. As the exposure time was increased, the digital images were superior to radiographs in readability. 4. As the size of lesion was changed, the digital images were superior to radiographs in detecting small lesion. 5. The coefficient of variation of mean score has no significant difference between digital images and radiographs.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권6호
• /
• pp.421-433
• /
• 2002

In order to elucidate the pathogenesis of cleft lip and palate, first of all, it is necessary to understand the developmental mechanisms of growth factors and extracellular matrix proteins in the tissues of cleft lip and palate. We have performed immunohistochemical studies on human cleft lip and palate tissues to elucidate the pathogenetic implications of cleft lip and palate. 16 specimens from postnatal human cleft lip and palate subjects and 17 specimens from autopsy of prenatal human cleft lip and palate were fixed in 10% buffered formalin, embedded in paraffin. The sections were routinely stained by hematoxylin and eosin, also stained by PAS, and followed by immunohistochemical stainings using the antiseras of growth factors and extracellular matrix proteins such as PCNA, S-100, c-erb-B2, MMP-3, MMP-10, HSP-70, transglutaninase-C, E-cadherin, VEGF, vWF. Both the prenatal and postnatal specimens of cleft lip and palate showed dysplastic proliferation of the basal cell layer, increased infiltration of melanocytes into mucosal epithelium, sebaceous gland hyperplasia ingrowing into the muscular tissue of lip and palate, and fatty infiltration into the submucosal deep connective tissue. The strong reactions of MMP-3 and HSP-70 were detected in the tissues of cleft lip and palate, especially increased in degenerating muscle bundles, while the immunostainings of PCNA and c-erb-B2 were weakly positive in the tissues of cleft lip and palate. These data suggest that the retrogressive tissue degeneration around the cleft areas persistently exist during the prenatal and postnatal period after cleft formation, and the sebaceous gland hyperplasia and fatty infiltration with the intense expression of MMP-3 and HSP-70 is closely related to the muscular degeneration around the cleft area.

• 음성과학
• /
• 제10권4호
• /
• pp.117-124
• /
• 2003

Speaker recognition is the technology that confirms the identification of speaker by using the characteristic of speech. Such technique is classified into speaker identification and speaker verification: The first method discriminates the speaker from the preregistered group and recognize the word, the second verifies the speaker who claims the identification. This method that extracts the information of speaker from the speech and confirms the individual identification becomes one of the most efficient technology as the service via telephone network is popularized. Some problems, however, must be solved for the real application as follows; The first thing is concerning that the safe method is necessary to reject the imposter because the recognition is not performed for the only preregistered customer. The second thing is about the fact that the characteristic of speech is changed as time goes by, So this fact causes the severe degradation of recognition rate and the inconvenience of users as the number of times to utter the text increases. The last thing is relating to the fact that the common characteristic among speakers causes the wrong recognition result. The silence parts being included the center of speech cause that identification rate is decreased. In this paper, to make improvement, We proposed identification rate can be improved by removing silence part before processing identification algorithm. The methods detecting speech area are zero crossing rate, energy of signal detect end point and starting point of the speech and process DTW algorithm by using two methods in this paper. As a result, the proposed method is obtained about 3% of improved recognition rate compare with the conventional methods.