• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권9호
• /
• pp.538-544
• /
• 2004

This paper presents the interruption capability of serial-hybrid type GCB (gas circuit breaker) compared with that of puffer type. First a puffer type model interrupter which has the stroke length of 80 mm has been designed and manufactured. And also, a serial-hybrid type interrupter which has the same design parameters as the puffer type interrupter except the serially arranged thermal-expansion chamber and puffer cylinder has been fabricated. Using a simplified synthetic test facility, the critical interruption capabilities of the two GCBs have been estimated. The critical di/dt, the critical dV/dt of ITRV (initial transient recovery voltage) and the minimum arcing time of the puffer type model GCB were 10.7 A/${\mu}\textrm{s}$, 5.5 kV/${\mu}\textrm{s}$, and 15.0 ms respectively. In the case of serial-hybrid type model GCB, each of the values was 16.6A/${\mu}\textrm{s}$, 11.5 kV/${\mu}\textrm{s}$ and 13.0 ms. As a conclusion of this work, it has been quantitatively confirmed that the hybrid type interrupter can obtain the sufficient interruption capability at the operating force which is so low that puffer type interrupter has not the interruption capability.

• 한국표면공학회지
• /
• 제50권1호
• /
• pp.17-23
• /
• 2017

This work demonstrates arc generation and anodic film formation behaviors on Al1050 alloy during PEO (plasma electrolytic oxidation) treatment under a constant direct current in an alkaline electrolyte containing silicate, carbonate and borate ions. Only one big arc more than 2 mm diameter was generated first at the edges and it was moving on the fresh surface or staying occasionally at the edges, resulting in the local burning due to generation of an extremely big orange colored arc at the edges. Central region of the flat surface was not fully covered with PEO films even after sufficiently long treatment time because of the local burning problem. The anodic oxides formed on the flat surface by arcing once were found to consist of a number of small oxide nodules with spherical shape of $3{\sim}6{\mu}m$ size and irregular shapes of about $5{\sim}10{\mu}m$ width and $10{\sim}20{\mu}m$ length. The anodic oxide nodules showed uniform thickness of about $3{\mu}m$ and rounded edges. These experimental results suggest that one big arc observed on the specimen surface under the application of a constant direct current is composed of a number of small micro-arcs less than $20{\mu}m$ size.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.835-838
• /
• 2002

동작되고 있는 고전압 기기는 전기의 독특한 특성 때문에 초음파 방출을 유발하는 특유한 소리를 방출한다. 초음파 방출이란 아킹, 코로나, 트래킹과 같은 전기적변화에 의해서 발생된다 고전압 전력 설비에서 아킹, 코로나, 트래킹은 여러 가지 장애를 일으킬 뿐만 아니라 인체에도 매우 치명적인 손상을 야기한다. 고전압 기기의 장애 요소를 방지하고 사전에 진단하기 위해 초음파 측정이 주목받게 되었지만 아직까지 기초적인 측정 데이터가 충분히 제시되어 있지 않은 실정이다. 본 논문에서는 변압기 설비에서 발생하는 초음파 이상음을 분석하고 분석한 자료를 표준 데이터화 하는데 그 목적을 둔다.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.42-49
• /
• 2022

An underground electric switch is a high-voltage switch used in distribution network systems for a reliable power supply. Many studies are being conducted to expand the switch to use an eco-friendly gas using dry air instead of SF6 gas to reduce greenhouse gas emissions. In this study, a flow analysis model was established to improve the performance of an eco-friendly gas switch. The results were compared and reviewed through experiments. For the optimal arc grid design applied to the switch, the flow characteristics based on the flow path configuration and the changes in arcing time for each configuration were compared. Flow analysis can predict the switch flow distribution, and a comparative review of the flow path configurations of various methods is possible.

• 한국전기전자재료학회논문지
• /
• 제29권3호
• /
• pp.181-185
• /
• 2016

One of the important issues for fabricating the microelectronic display devices such as FED, PDP, and VFD is to obtain a high vacuum level inside the panel. In addition, sustaining the initial high vacuum level permanently is also very important. In the conventional packing technology using a tabulation method, it is not possible to obtain a satisfiable vacuum level for a proper operation. In case of FED, the poor vacuum level results in the increase of operating voltage for electron emission from field emitter tips and an arcing problem, resultantly shortening a life time. Furthermore, the reduction of a sealing process time in the PDP production is very important in respect of commercial product. The most probable method for obtaining the initial high vacuum level inside the space with such a miniature and complex geometry is a vacuum in-line sealing which seals two glass plates within a high vacuum chamber. The critical solution for the vacuum sealing is to develop a frit glass to avoid the bubbling or crack problems during the sealing process at high temperature of about $400^{\circ}C$ under the vacuum environment. In this study, the suitable frit power was developed using a mixture of vitreous and crystalline type frit powders, and a vacuum sealed CNT FED with 2 inch diagonal size was fabricated and successfully operated.

• 한국광물학회지
• /
• 제28권3호
• /
• pp.233-244
• /
• 2015

전기로와 마이크로웨이브에 노출시킨 황철석 시료에 대하여 광물학적 상변화를 파악하고 Fe 최대 용출 인자들을 결정하고자 하였다. 전기로에 노출시킨 시료에서 적철석으로 구성된 가장자리 구조가 나타난 반면에 마이크로웨이브에 노출시킨 시료는 적철석과 자류철석이 가장자리 구조로 나타났다. 특히 마이크로웨이브에 노출시킨 시료는 결정 내부에 아크방전에 의하여 수많은 크랙들이 서로 연결되어 형성되었지만 전기로에 노출시킨 시료는 크랙이 형성되지 않았다. XRD 분석에서, 전기로에 노출시킨 시료는 황철석과 적철석이 나타났지만 마이크로웨이브에 노출시킨 시료는 황철석, 적철석 및 자류철석이 나타났다. 황철석 시료에 대하여 암모니아 용출실험을 수행하여 Fe 용출률이 최대로 나타나는 인자들은 -325 mesh 입도, 2.0 M의 황산, 1.5 M의 황산암모늄, 1.0 M의 과산화수소 농도에서였다. 용출률이 최대로 나타나는 인자들을 전기로에 그리고 마이크로웨이브 노출 시료에 각각 적용한 결과 전기로 보다 마이크로웨이브에 노출시킨 시료에서 Fe 용출률이 더 많이 그리고 더 빠른 시간에 나타났다. 따라서 산업광물에 포함된 Fe 제거에 혹은 금을 함유하는 황철석 분해에 마이크로웨이브 가열이 효과적일 것으로 사료된다.