• Journal of the Korea Institute of Building Construction
• /
• v.19 no.1
• /
• pp.9-18
• /
• 2019

Concrete, which is the most widely used building material in modern times, has been improved not only in strength but also in structural performance such as increase in toughness and ductility, weight reduction, and improvement in quality of human life. Due to the surge in demand for the building, there is a tendency to be used variously from architectural panel and architecture to interior accessories. In Korea, a light-transmitting concrete, LEFC(Light Emotion Friendly Concrete), that insert plastic rods to stimulate emotional sensation through the combination of light and concrete has developed. In previous research, it was confirmed that the use of a synthetic foam agent rather than an animal foam agent did not cause a fogging phenomenon. In this study, lightweight by applying foaming agent to LEFC and two types of fiber (Nylon Fiber, Polyvinyl Alcohol) were compared to achieve to investigate the fiber to be applied in future. An equation that can predict the loss and adhesion reduction of the concrete section according to the diameter of the rod (5mm, 10mm) and the interval (10mm, 15mm, 20mm) was proposed.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.1
• /
• pp.95-103
• /
• 2019

Introduction and use of Building Information Modeling(BIM) in construction projects have increased steadily over the past few years. However, the level of domestic BIM utilization is still tenuous compared to the international scene. Therefore, this study aims to present the possible directions for BIM research through an analysis of research literatures in Korea as well as in foreign countries. Papers on BIM were collected for this study from Korea and foreign countries for the field of architecture, and analyses and comparisons were performed by year and field. Further, the research patterns were analyzed using WordCloud, which is one of the popular big data techniques. From the analysis, it is found that the design field still constitutes the largest component of research, but the construction field is actively developing as well. In addition, it is realized that domestic BIM research continues to grow on collaboration and environment-friendly methodologies since 2012; it is also demonstrated that foreign BIM research has undergone changes in research trends every year including recently, and is progressing actively. Therefore, this study concludes that it is necessary to actively conduct research in the field of Industry Foundation Class(IFC) in the future. The results of this study can further be used as reference data for conducting BIM studies in Korea in the future.

• The Korean Journal of Archival Studies
• /
• no.19
• /
• pp.251-291
• /
• 2009

Due to the trend toward computerization of business services in public sector and the push for e-government, the volume of records that are produced in electronic system and the types of records vary as well. Of those types, dataset is attracting everyone's attention because it is rapidly being supplied. Even though the administrative information system stipulated as an electronic record production system is increasing in number, as it is in blind spot for records management, the system can be superannuated or the records can be lost in case new system is developed. In addition, the system was designed not considering records management, it is managed in an unsatisfactory state because of not meeting the features and quality requirements as records management system. In the advanced countries, they recognized the importance of dataset and then managed the archives for dataset and carried out the project on management systems and a preservation formats for keeping data. Korea also is carrying out the researches on an dataset and individual administrative information systems, but the official scheme has not been established yet. In this study the items for managing archives which should be reflected when the administrative information system is designed was offered in two respects - an identification method and a quality requirement. The major directions for this system are as follows. First, as the dataset is a kind of an electronic record, it is necessary to reflect this factor from the design step prior to production. Second, the system should be established integrating the strategy for records management to the information strategy for the whole organization. In this study, based on such two directions the strategies to establish the identification for dataset in a frame to push e-government were suggested. The problem on the archiving steps including preservation format and the management procedures in dataset archive does not included in the research contents. In line with this, more researches on those contents as well as a variety of researches on dataset are expected to be more actively conducted.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.4
• /
• pp.535-543
• /
• 2019

This study examined the empirical meaning of skylight in underground space, and for this purpose, 29 questions were drawn, consisting of technical performance, functional performance, and behavioral performance. In addition, under the assumption that the meaning of the skylight will be clearly revealed through the comparison between the underground streets with and without the skylight, three underground streets with the skylight and three underground streets without the skylight of Japan were selected as the subjects of the study. Based on the results of the survey, descriptive statistical analysis and frequency analysis were conducted, and an independent sample T-test was conducted for each analysis, and correlation analysis was conducted to derive improvement priority. As a result of the analysis, it was found that skylight had a certain effect on the sense of time and imageability inside the underground commercial space. In addition, it was analyzed that skylight exerted important function in the qualitative aspect of underground commercial space. Lastly, the improvement rankings for three underground streets without skylight were derived in the order of sign/guide map, space diversity, maintenance, rest space, and floor design.The improvement rankings for three underground streets with skylight were drawn in order of resting space, diversity of space, temperature and humidity, air, and maintenance.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.24-47
• /
• 2013

This study focused on the constructional concepts, landscape design techniques and changes made of the Sandan(山壇) area in the rear garden of Changdeokgung Palace based on the spatial organization of the zone. The results of this study are as below. Constructional layers that have been maintained throughout the centuries from King Injo(仁祖), King Sukjong(肅宗), King Sunjo(純祖), the Japanese colonial period to the present, were found in the Sandan area. The Sandan area, which was developed with the establishment of Chuiseungjeong(取勝亭) during the ruling of King Injo(仁祖), was created as a resting place for the King, and its usage continued until King Sukjong(肅宗) built Nakminjeong(樂民亭). However, the whole area was reorganized to host ritual ceremonies, where ancestral rites were performed for the mountain gods, after Sandan and Baekunsa(白雲社) were built during King Gojong's reign, before the drawing of 'Painting of Eastern Palaces(東闕圖).' The architectural component used then appears to have been designed to serve ancestral ritual formalities for the god of land, or to satisfy the religious desires of the royal family not fulfilled by Confucian courtesy. These are characteristics that define the Sandan area. Meanwhile, the analysis of the ground plan of the Changdeokgung Palace revealed that the Sandan had been maintained until the Japanese colonial era, but was removed sometime after liberation. The area underwent extensive reform in the early 1970s, when the whole area was developed into a tourist destination called Bingcheon(氷泉). Then, a new road that runs through Bingcheon was laid, and the present condition reflects the construction result of the time. An interview with a person who had taken part in the repair work in the 1970s confirmed that the construction work at the time had the goal of establishing two drainage systems for drinking water and copied the Okryuchon(玉流川) well.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.143-149
• /
• 2019

In this study, a U-shape composite beam was developed to be effectively used for a steel parking lot which is 8m or lower in height. When the U-shape composite beam was applied to a steel parking lot, essential considerations were story-height and long-span. In addition, due to the mixed structural system with reinforced concrete and steel material, the U-shape composite beam needed to have a structural integrity and reliable performance over demand capacity. The main objective of this study was to investigate the performance of the structure consisting of the reinforced concrete (RC) slab and U-shape beam. A U-shape composite beam generally used at a parking lot served as a control specimen. Four specimens were tested under four-point bending. To calculate theoretical values, strain gauges were attached to rebar, steel plate, and concrete surface in the middle of the specimens. As the results, initial yielding strength of the control specimen occurred at the bottom of the U-shaped steel. After yielding, the specimen reached the maximum strength and the RC slab concrete was finally failed by concrete crush due to compressive stress. The structural performance such as flexural strength and ductility of the specimen with the increased beam depth was significantly improved in comparison with the control specimen. Furthermore, the design of the U-shape composite beam with the consideration of flexural strength and ductility was effective since the structural performance by a negative loading was relatively decreased but the ductile behavior was evidently improved.

• Korean Journal of Environmental Biology
• /
• v.36 no.3
• /
• pp.412-423
• /
• 2018

In this study, we investigated the distribution and habitat of Tscherskia triton from 2014 to 2016 in Jeju Island. Nine individuals of T. triton were observed and captured from four habitat sites. Most of the habitats were of the natural and rural type, and urban type coexisted in some of the areas. The natural type of habitat comprised of forests, shrubs, and grasslands. The habitat of T. triton ranged vertically from 102 m in lowland to 742 m in a mountainous area and was not observed in altitude over 1,000 m. Small brooks, dry streams or wetlands were found to be located nearby the habitat of T. triton. The T. triton was distributed mainly in areas with natural vegetation and artificial plantation in company with the upper story vegetation on the ground of intact or incomplete layer structure, or the area with the relatively large distribution of shrubs and long grassland. The presence of roads and forest paths in these habitats suggested that the T. triton can thrive in areas with human disturbance. The designation of Halla Mountain National Park in Jeju Island as a conservation area prevents damage or loss of the habitat due to any artificial development. However, frequent human disturbances occurring in grassland is tolerated by small mammals. Therefore, in order to help T. triton maintain a stable population density, it is essential that various types of the habitat should be conserved in the middle mountain areas and the grasslands in lowlands should be well protected.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.2
• /
• pp.48-63
• /
• 2015

This study began with the purpose of awakening an interest in Korean Nu-jung and seeking application plan based on Nu-jung of Aneuisamdong. Also it intends to suggest activation plan of Nu-jung while using the culture of taste for the arts and classical scholar of ancestors with the physical place named Nu-jung as the medium. As concrete ways to activate Nu-jung, we suggested plans which use the game of go(Baduk), main material of the culture of taste for the arts and classical scholar, and increase availability by planning a program adding picturesqueness of Nu-jung. By bringing the material named the game of go(Baduk) to the place named Nu-jung, we suggested the plan capable of experiencing the culture of taste for the arts and classical scholar and also expecting local promotion and economical effect. And the plan is to design and conduct night program, 1 night 2 days program, tailored program, and so on by combining the material of the culture of taste for the arts and classical scholar with the medium named 'Dal(the moon)' in the static place named Nu-jung. The plans above are applicable to most of Nu-jung scattered all over the country, which means that we have a lot of Nu-jung in Korea and, at the same time, we have abundant contents to be used as cultural properties. Now it's important how to develop and use these contents through the connection with various academic fields in terms of managing cultural properties. By understanding the value of the original form of culture while emerging from simply using cultural properties, we can use cultural properties in a higher level. For this, preserving cultural properties should be supported by continuous interdisciplinary study.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.1
• /
• pp.45-56
• /
• 2019

In this study, the seismic risk has been evaluated by setting the bedrock acceleration to 0.154g which, was taking into consideration that the earthquake return period for the buried electric power tunnels in the metropolitan area to be 1,000 years. In this case, the risk assessment during the earthquake was carried out in three stages. In the first stage, the site classification was performed based on the site investigation data of the target area. Then, the LPI(Liquefaction Potential Index) was applied using the site amplification factor. After, candidates were selected using a hazard map. In the second stage, risk assessment analysis of seismic response are evaluated thoroughly after the recalculation of the LPI based on the site characteristics from the boring logs around the electric power area that are highly probable to be liquefied in the first stage. The third Stage visited the electric power tunnels that are highly probable of liquefaction in the second stage to compensate for the limitations based on the borehole data. At this time, the risk of liquefaction was finally evaluated based off of the reinforcement method used at the time of construction, the application of seismic design, and the condition of the site.

• Smart Media Journal
• /
• v.8 no.1
• /
• pp.74-81
• /
• 2019

Recently, machine learning technology has had a significant impact on society, particularly in the medical, manufacturing, marketing, finance, broadcasting, and agricultural aspects of human lives. In this paper, we study how to apply machine learning techniques to foods, which have the greatest influence on the human survival. In the field of Smart Farm, which integrates the Internet of Things (IoT) technology into agriculture, we focus on optimizing the crop growth environment by monitoring the growth environment in real time. KT Smart Farm Solution 2.0 has adopted machine learning to optimize temperature and humidity in the greenhouse. Most existing smart farm businesses mainly focus on controlling the growth environment and improving productivity. On the other hand, in this study, we are studying how to apply machine learning with respect to harvest time so that we will be able to harvest fruits of the highest quality and ship them at an excellent cost. In order to apply machine learning techniques to the field of smart farms, it is important to acquire abundant voluminous data. Therefore, to apply accurate machine learning technology, it is necessary to continuously collect large data. Therefore, the color, value, internal temperature, and moisture of greenhouse-grown fruits are collected and secured in real time using color, weight, and temperature/humidity sensors. The proposed FPSML provides an architecture that can be used repeatedly for a similar fruit crop. It allows for a more accurate harvest time as massive data is accumulated continuously.