• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.83-90
• /
• 2009

As a series of 'Performance Assessment of Building Envelopes I: Double Skin Facade', three types (interior, exterior, mixed (int.&ext.)) of lightshelves and RetroLux were examined in terms of $CO_2$ emissions. It is shown that the exterior lightshelf could achieve the most energy savings (9.6-38.7%) in general office buildings due to blocking solar radiation before entering the indoor space. However, the interior lightshelf is the worst (1.4-5.2%) among three of them. The RetroLux has two components: (1) sun-reflector (first louver component), (2) light shelf for improving daylight induction (second louver component). Due to these two components, solar radiation from windows is filtered depending on seasonal variation (solar altitude). Therefore, the RetroLux can reduce 18.0-27.9% of annual energy consumption (both cooling and heating), and $552-3,290Won/m^2{\cdot}yr$ of operation cost is saved.

• 한국공간구조학회논문집
• /
• 제17권4호
• /
• pp.133-140
• /
• 2017

Recently, the interest in the smart buildings is increasing in the architecture field. Among them, a research of facade design using a transformable system that can adjust the effect of the external environment is in progress. One of a typical example of the deployable system is a Scissors system that can change shape by using the geometric conditions of a unit member. Scissors system is a high-tech structural system which can construct the deployable plan and curved space by using the SLE (Scissors-Like Element) consisted of two Bar and Pivot. If the facade is designed by applying Scissors system, it is possible to maximize the performance and aesthetic effect of the structure by using a shape change of the line member. This paper presents a study of deployable facade design applying hybrid-typed Scissors system. A new deployable pattern of facade design is developed by combining Angulated Scissors system and tessellation pattern. Applying the deployable pattern a double skin construction method which is to add an outer wall for design, it raises three dimensional effects and can maximize the artistic essence of the change in shape upon deployment.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.953-958
• /
• 2006

Perimeter zone has been reinforced by active systems, such as fan-coil units, because it causes an increase in heating and cooling loads, dew condensation in winter, or discomfort with cold-draft to residents in buildings, through poor insulation by light-weighed skin due to progressing multi-storied buildings and skyscrapers. However, because these active systems raise Its capacity so that fossil fuel is used as much as they are added, and ultimately, greenhouse effect is urged, we proposed BIPV system functioned as solar collector which can substitute active system. As an early stage, heat balance equation in steady-state by Fortran was used not only for pre-heating effect and electric power capacity during the day in winter, but also for electric power capacity during day in slimmer and sky radiation effect during night in summer. Especially, we should have considered shading on PV, since even a little bit of it makes the efficiency too low for the PV to work. Still, when the flux of pre-heated air was increased to make air-barrier, its temperature was not enough to make it because the speed of heat exchange was too fast to warm up the air, thus the capacity to meet the condition was evaluated, and electric power from PV was made used for it.

• KIEAE Journal
• /
• 제6권1호
• /
• pp.25-32
• /
• 2006

Regarding to the Domestic housing politics to improve residing environment and effective use of country land, apartment buildings have been constructed since early of 1970s. Now apartment is taking over 50% out of entire housing in Korea. In the view point of PV application to the apartment, PV has amny advantages because of the wideness of out-walls and high floors building in APT. Therefore, if APT could use the electricity produced by BIPV, we can solve more easily environment and energy problems caused by housing. The research conclusion by analysing conditions and application method to introduce BIPV application to APT in near future is as below. -The out look of APT has been developed periodically and recently gable roof or canopy is popular which PV installation is more favorable. -For Balcony part with double skin facade sassy window, It has a preferable condition to install on the wall depending on the window direction. -In case of shorter distance between buildings due to high ratio of outside measurement, it is more desirable to install PV on the roof than on the wall of Apartment by considering low solar altitude. -Also depending on the direction of APT building, it is more effective and productive in electricity in the broad surface of side wall of APT. -In case of superhigh floor APT where facade system is mostly double skin facade of curtain wall system, PV module can replace the traditional curtain wall and will reduce architectural materials and obtain various out look design thereof.

• 한국지반공학회논문집
• /
• 제28권1호
• /
• pp.55-66
• /
• 2012

본 논문에서는 쏘일네일링 공법, 앵커 공법, 또한 이 두공법의 장점을 결합한 하이브리드 공법의 하중전이 메커니즘에 대한 연구를 수행하였다. 하이브리드 공법은 철근과 PC강연선을 보강재로 하며, 프리스트레스를 가함으로써 능동적인 주면마찰력 양상을 유도하고자 한다. 본 논문에서는 주면마찰력 산정 이론과 하중전이 이론을 바탕으로 각 공법의 하중전이 메커니즘을 파악하였다. 또한 현장인발시험을 실시하여 측정된 계측결과의 분석 및 하중전이 이론과의 비교 검토를 통해서 하이브리드 공법의 하중전이 메커니즘을 규명하였다. 쏘일네일링 공법은 인발거동 시 전면에서부터 선단으로 인장력이 전이되는 양상을 보이는 반면, 앵커 공법은 내하체가 위치한 선단에서 프리스트레스를 가함에 따라 선단에서 전면으로 압축력이 전이된다. 이 두 공법을 결합시킨 하이브리드 공법은 프리스트레스를 가할 때에는 앵커공법과 같이 선단에서 압축력이 발생하지만 동시인발 시에는 선단에서는 압축력이 전면에서는 인장력이 발생하게 된다. 따라서 하이브리드 공법의 하중전이 메커니즘은 쏘일네일링의 거동과 앵커의 거동이 모두 나타난다.

• Investigative Magnetic Resonance Imaging
• /
• 제24권3호
• /
• pp.168-173
• /
• 2020

Extranodal lymphoma presents in almost one-third of all non-Hodgkin lymphoma cases. The gastrointestinal tract, skin, and central nervous system are common sites of involvement, whereas the urethra and cervix are very rare. To the best of our knowledge, this is the first report on concurrent extranodal involvement of the uterine cervix and urethra. We report imaging findings of malignant lymphoma involving urethra and cervix concurrently in a 79-year-old female patient with literature review. The magnetic resonance imaging showed huge intermediate to high signal intensity mass on T2 weighted images and strong homogeneous enhancement in uterine cervix and periurethral area, but no surrounding architectural disruption.

• 한국지열·수열에너지학회논문집
• /
• 제10권4호
• /
• pp.8-14
• /
• 2014

With the advancement of the industry such as information technology, residential facilities has been consistently achieved high standard. Ubiquitous system has been introduced in apartments nowadays, and it will be general facilities in the near future. However elderly people is not generally accustomed to ubiquitous or internet environment, so degree of ubiquitous system usage is able to be less than young people. This study aims to grasp the relative importance of ubiquitous environment, and offer materials to realize residential environment's improvement of silver towns under investigation through a questionnaire survey. Skin recognition system was most preferred among various functions. Energy management system, protection system of solitude elderly person and security system by CCTV was also preferred at a high rate. Housework part such as cooking aid, height control of sink and basin etc., was not less important system relatively.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.48-49
• /
• 2018

Recently the old buildings have been increasing and increasing reconstruction. As a result, the frequency of use of architectural adhesives has increased. Adhesives are not only used for bonding but also for building materials used in various fields. However, since the adhesive is made of an organic material, it causes various skin diseases and sick house syndrome, and when a fire occurs, harmful substances are generated, and incomplete combustion may cause personal injury. Therefore, in this study, to solve the disadvantages of conventional adhesives, we tried to develop inorganic adhesives using inorganic materials.

• Structural Engineering and Mechanics
• /
• 제85권6호
• /
• pp.743-753
• /
• 2023

Piezoelectricity is defined as the ability of certain materials to produce electric signals when mechanically stressed or to deform when an electrical potential is applied. Piezo technology is becoming increasingly crucial as intelligent devices use vibration sensors to detect vibrations in consumer electronics, the automotive industry, architectural design, and other applications. A wide range of applications is now possible with piezoelectric sensors, such as skin-attachable devices that monitor health and detect diseases. In this article, copper nanoparticles are used in the piezoelectric sensor as the driving agent of the magnetic field. Magnetic nanocatalysts containing copper nanoparticles are used due to their cheapness and availability. Considering that the increase of the electric field acting on the piezoelectric increases the damping (As a result, damping materials reduce radiation noise and increase material transfer losses by altering the natural vibration frequency of the vibrating surface). Among the advantages of this method are depreciating a significant amount of input energy using high energy absorption capacity and controlling slight vibrations in the sensors.

• 한국지반공학회논문집
• /
• 제24권2호
• /
• pp.77-86
• /
• 2008

흙의 교란영역과 측정값은 관입시험기의 크기에 영향을 받는다. 관입기의 크기가 작을수록 더 국부적인 값을 얻을 수 있다. 관입시험 시 흙의 교란을 최소화하면서 흙의 특성을 파악하기 위하여 극소형 마이크로콘(외경 5mm)을 설계 및 제작하였다. 선단저항력은 마이크로콘 선단부에 설치된 변형률계를 이용하여 측정하였다. 뿐만 아니라 선단 저항력으로부터 마찰저항력 성분을 효과적으로 제거하기 위하여 이중관 형식의 마찰 슬리브를 채택하였다. 설계 시 변형률계의 설치, 회로구성, 관입시스템, 관입속도, 측정률, 작동 온도, 그리고 calibration 과정이 고려되었다. 점토의 경계면, 점토-모래지반의 경계면을 마이크로콘을 적용함으로써 효과적으로 찾아 낼 수 있었다. 뿐만 아니라, 마이크로 콘과 직경 16mm의 미니어처 콘을 이용하여 측정한 선단저항력이 매우 유사하지만, 마이크로 콘의 해상도가 매우 높은 것으로 나타났다. 본 논문은 마이크로 콘이 매우 높은 해상도 그리고 주변지반의 변형을 최소화하면서 흙의 경계면을 효과적으로 감지할 수 있음을 보여준다.