• 한국물환경학회지
• /
• 제25권2호
• /
• pp.288-294
• /
• 2009

Flow field-flow fractionation (Fl-FFF) device has been widely used to verify the size and molecular weight of various colloids and organics. The Fl-FFF, however, generally uses carrier solutions with only low to moderate ionic strengths to exclude the high affinity of materials to the membrane under high ionic strength conditions. Thus, materials existing in seawaters have not been accurately analysed based on the hydrodynamic size and molecular weight using current Fl-FFF techniques. The highest ionic strength tested was up to 0.1 M, while seawater ionic strength is about 0.6 M. The aim of this study is to accurately measure the hydrodynamic size of particles under carrier solutions close to seawater conditions with the Fl-FFF. By employing various operating conditions during the Fl-FFF analyses, it was demonstrated that the flow conditions, the concentration of surfactants, and stabilization times were key factors in acquiring compatible data. Results have shown that the cross flow was more influential factor than the channel flow. The concentration of the surfactant was to be at least 0.05% and the minimum 15 hr of stabilization was needed for accurate and reproducible data acquisition under seawater condition.

• KIEAE Journal
• /
• 제16권6호
• /
• pp.159-166
• /
• 2016

Purpose: The architectural structures in the engineering field include more than one material, and the heat transfer through these multiple materials becomes complicated. More or less, the analytic solutions obtained by the hand calculation can provide the limited information of heat transfer phenomena. However, the engineers have generally been forced to obtain reliable results than those of the hand calculation. The numerical calculation such as a finite volume methods with the unstructured grid system is only the suitable means of the analysis for the complex and arbitrary domains that consists of multiple materials. In this study, a new numerical code is developed to provide temperature distributions in the multiple material domains, and the results of this code are compared with the validation cases in ISO10211. Method: Finite volume methods with an unstructured grid is employed. In terms of numerical methods, the heat transfer conduction coefficient is not defined on the surface of the cell between different material cells. The heat transfer coefficient is properly defined to accurately mimic the heat transfer through the surface. The boundary conditions of heat flux considering radiation or heat convection are also developed. Result: The comparison between numerical results and ISO 10211 cases. We are confirmed that the numerical method provides the proper temperature distributions, and the heat transfer equation and its boundary conditions are developed properly.

• 한국화재소방학회논문지
• /
• 제30권1호
• /
• pp.17-23
• /
• 2016

막구조물은 코팅된 직물을 주재료로 하는 구조로 연성을 가진 막을 사용하여 외부하중에 대해 안정된 형태를 유지하는 구조물을 말한다. 막에 의한 구조시스템은 대공간 시공이 가능하고 가벼우며 빛을 투과할 수 있는 등 자원 및 관리비용 절감 면에서 많은 이점을 가지고 있어 다양한 용도의 구조물에 적용되며 그 사용용도가 점차 확대되고 있는 실정이다. 하지만 막구조 건축물 및 막재가 다양해짐에도 불구하고 화재안전을 고려한 막재의 성능에 대한 기준은 미비한 실정이며 다양한 용도에 적합한 난연성능이 우수한 막재의 개발이 요구되고 있다. 따라서 본 연구에서는 시판되는 건축용 막재인 PTFE, PVDF와 PVF, ETFE 필름 막재의 방염 및 난연성능 시험 등을 통해 건축용 막재의 난연특성을 확인하였다.

• 한국건축시공학회지
• /
• 제22권5호
• /
• pp.451-462
• /
• 2022

이 연구의 목적은 다양한 접합상세를 갖는 프리캐스트 콘크리트(precast concrete, 이하 PC) 전단벽에 대한 BIM 모델링 절차를 정립하는 것이다. 그 결과 스케치업(SketchUp)의 프로그램과 컴포넌트 기능과 IFC(Industry foundation classes)파일 형식을 이용하여 BIM 프로그램에서 사용가능한 PC 전단벽 패밀리 라이브래리를 구축 할 수 있었다. 스플라이스 슬리브, 볼트 또는 용접접합공법을 이용한 PC 전단벽은 BIM 프로그램으로부터 배근된 철근들의 간섭여부와 콘크리트, 철근 및 철재 재료들의 물량을 정확히 평가할 수 있었다. 평가 결과 용접접합 공법을 이용한 PC 전단벽은 판재, 볼트 및 너트를 사용하였음에도 스플라이스 슬리브로 연결된 PC 전단벽에서 사용된 재료들의 전체물량, 경제성 및 환경영향성이 비슷한 수준에 있었다. 결과적으로 볼트 또는 용접접합 공법은 PC 전단벽에서 적용가능성이 높은 공법이며, 특히 시공성까지 고려한다면 스플라이스 슬리브 공법보다도 더 유용한 연결공법이 될 것으로 판단된다.

• 교육시설 논문지
• /
• 제19권1호
• /
• pp.25-35
• /
• 2012

The function and the role of school are changing according to various future-oriented education models such as open-ended learning cycle, community learning center, re-schooling, network system and de-schooling, which reflect recent social demands related to discussions on sustainability, low birth rate and ageing. what changes to our school buildings have been there? This study is aimed that shows the architectural change of school buildings and environments in 2000's. It reveals the architectural tendancy through some school buildings, 'the excellent facility school award' winner which Ministry of Education, Science and Technology have chosen annually since 1998. In the past decade, it is outstanding change that mass composition, window patterns and exterior wall materials are diversified greatly. The most of them have a opened main hall and multi-purpose spaces which give effective educational environment to students. Although visual changes are outstanding, we still need qualitative educational space program and improved school building design according to future-educational demands.

• International Journal of Concrete Structures and Materials
• /
• 제6권3호
• /
• pp.187-197
• /
• 2012

An experimental investigation was conducted to compare the bond strength of reinforcing steel in self-consolidating concrete (SCC) with conventional concrete (CC). This study investigated two different compressive strengths of SCC as well as CC. The experimental program consisted of 24 pull-out specimens as well as 12 full-scale beams (three for each concrete type and strength). The pull-out specimens were based on RILEM recommendations, and the beam specimens were tested under a simply supported four-point loading condition. The CC test results served as a control and were used to evaluate the results from the SCC pull-out and beam specimen tests. Furthermore, a comparison was performed between results of this study and a bond database of CC specimens. These comparisons indicate that SCC beams possess comparable or slightly greater bond strength than CC beams.

• International Journal of Concrete Structures and Materials
• /
• 제5권2호
• /
• pp.125-131
• /
• 2011

Five all-lightweight alkali-activated (AA) slag concrete mixes were tested according to the variation of water content to examine the significance and limitation on the development of cementless structural concrete using lightweight aggregates. The compressive strength development rate and shrinkage strain measured from the concrete specimens were compared with empirical models proposed by ACI 209 and EC 2 for portland cement normal weight concrete. Splitting tensile strength, and moduli of elasticity and rupture were recorded and compared with design equations specified in ACI 318-08 or EC 2, and a database compiled from the present study for ordinary portland cement (OPC) lightweight concrete, wherever possible. Test results showed that the slump loss of lightweight AA slag concrete decreased with the increase of water content. In addition, the compressive strength development and different mechanical properties of lightweight AA slag concrete were comparable with those of OPC lightweight concrete and conservative comparing with predictions obtained from code provisions. Therefore, it can be proposed that the lightweight AA slag concrete is practically applicable as an environmental-friendly structural concrete.

• 한국실내디자인학회논문집
• /
• 제25호
• /
• pp.213-220
• /
• 2000

The meaning of light is not always developed aspect in process of architecture history as essence worth of the architecture. It means that architectural light is not affected simple development of civilization, but it has more complex aspect. The technology of applying architecture has continuous development of society that light is possible to extend quantity by development of technology because light is component not simple material or tools but strong worthy aspect, quality development of architecture comes true by exact understanding and application. Conversion from medieval society to modern society begins at the Industrial Revolution has new skills and materials, the architectural conform general space filled with non-characteristic light, and it gives rising to pursuit Utopia is not exist frequently. In result, light of metaphysical meaning is diminished and exterminated. In other hand light seems to be tools by development of technology in modern society, recovering its own meaning in other aspect. That light makes perfect image of architecture not by finite meaning only for simple space but by expressing strongly point that unify the whole architectural composition. Light is free from partial material of architecture. Light activates major composition through high-technology, and has possibility to carry out the essential worth animate architecture. The light expresses relative speciality for sense of place recognizes major component which the human being lives in and conform the real meaning of architecture.

• 한국농촌건축학회논문집
• /
• 제14권4호
• /
• pp.97-105
• /
• 2012

Winsborough Hall built by Martin L. Winehart who was the missionary of the Presbyterian Church of America in 1927 was built by Mrs. Winsborough's birthday contribution. Winsborough Hall was clearly divided into the original form built in 1927 and remodelled form by extension. Most of walls were constructed with several kinds of bricks for both sides and opening in the original form and remodelled form. Each room divided by inner wall was kept with original form because it is difficult to remodel it on the characteristics of building. But, it was confirmed through the related literatures that security of opening at some rooms and annexation of rooms through removal of the wall on the 2nd floor which was relatively easy to transform wall compared to the first floor were made. Variability of the wall affected the truss structure of roof and it created rare double truss structure. Architectural value of Winsborough Hall was in its first architectural trial using red brick in Gwangju region since 1920s. It suggested that it was differential architectural trial from Korean-Western mixed building constructed by the missionaries from 1940 to 1910 and buildings made of gray bricks prevailed from 1911 to 1920 and it showed the advancement in the architectural structure and materials.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.311-317
• /
• 2008

As outdoor environment become worse due to concentration of population in large cities, the importance of environmental control strategies such as the arrangement of green space or water space and ventilation paths, has been increasingly recognized. However, most of the studies focus on the assessment on outdoor thermal environment, few studies focus on the interrelationship between thermal environment in residential block and human thermal comfort. The aims of this study is to develop the outdoor planning method to reduce the heating/cooling load in an apartment unit or entire block by the sustainable approaches in outdoor environmental design. In this paper, on the basis of the prior studies, the effect of the outdoor thermal environment on human thermal comfort will be analysed.