• 제목/요약/키워드: Architectural Field Design

검색결과 440건 처리시간 0.024초

걸이형 PC보의 인장저항성 및 현장적용 (Tensile Resistance and Field Application of Hang-type PC Beam)

  • 하상수
    • 한국건축시공학회지
    • /
    • 제20권5호
    • /
    • pp.449-457
    • /
    • 2020
  • 생활수준의 향상과 3D 업종 기피 현상으로 국내 건설현장에는 젊고 유능한 국내 노동자를 찾아보기 힘들고, 대부분 외국인 노동자가 그 대체인력으로 기여하고 있으나 여전히 기능공 부족 및 고령화로 인해 품질이 저하되고 있는 실정이다. PC화 공법은 공장에서 제작되고 현장에서 조립하는 공법으로 노동력 및 품질향상을 기대할 수 있다. 본 연구는 PC 공법에 적용할 수 있는 걸이형 PC보의 개발 및 개발된 PC보의 현장적용성 여부를 판단하기 위한 기초자료를 제공하는 위한 것이다. 걸이형 PC보 양 단부에는 U형 연결재가 설치되어 있으며, U형 연결재를 통해 간단히 시공되는 공법이기 때문에 U형 연결재의 역할은 매우 중요하다. 또한, U형 연결재는 걸이형 PC보에서 최종파괴가 발생되는 부분이므로 U형 연결재의 성능이 곧 걸이형 PC 보의 성능을 좌우하게 된다. 구조실험을 통해 U형 연결재의 재료물성을 파악하였으며, 파악된 재료시험 결과를 토대로 부분실험에 해당되는 단부실험 및 구조실험을 실시하여 현장 적용성 여부를 확인하였다.

되메움재 특성을 고려한 전력구 열환경 변화 예측 수치해석모델 개발 (Development of numerical model for estimating thermal environment of underground power conduit considering characteristics of backfill materials)

  • 김경훈;박상우;김민주;이대수;최항석
    • 한국터널지하공간학회 논문집
    • /
    • 제19권2호
    • /
    • pp.121-141
    • /
    • 2017
  • 최근 전력구 지중 송전선의 허용 전류용량에 대한 정부규제로 인해 전력구 공사에 현장 되메움재의 열적 거동에 대한 연구가 중요해졌다. 점차 증대되는 고용량 전력공급에 대한 수요와 더불어, 허용 전류용량을 산정하기 위해, 전력 케이블 주변 온도 증가를 유발하는 요인을 예측하고 분석하는 것이 시급하다. 전력구 내부의 과도한 열확산으로 인한 지중 송전선로 주변의 온도 증가는 지중 송전선 자체의 열저항을 증가시켜 절연 파괴 및 열 폭주 현상을 야기한다. 따라서 전력구 설계 및 시공시, 되메움재에 따른 전력구 현장 열거동 메커니즘을 규명하는 것이 매우 중요하다. 본 논문에서는 현장 시험시공을 기반으로, 전력구내부와 주변지반의 온도 변화 및 열저항을 산정하기 위한 수치해석 모델을 개발하였다. 전력구 열거동 파악을 위한 수치해석은 현장시험 시공시 획득한 4개의 다른 종류의 되메움재의 열적 그리고 물리적 물성치를 기반으로 수행되었다. 또한, 실내 시험을 통해 산정한 각 되메움재의 열저항을 수치해석 모델에 입력변수로 적용했다. 전력구 내부에 일정한 열량이 공급될 때, 되메움재의 단위중량, 함수비, 열적 특성 등 여러 변수를 고려한 열거동 메카니즘을 모사할 수 있도록 열거동 수치해석 모델을 구성하고 1년 동안의 수행된 현장계측값과 비교를 통하여 개발된 수치해석 모델을 검증하였다.

콘크리트 배합요인별 상·하부 분리타설에 의한 수화열 균열지수 저감방안 및 현장적용 (Method of Decreasing Cracking Index by Different Mix Conditions for Separated Placement and its Field Application)

  • 김민호;한천구
    • 한국건설순환자원학회논문집
    • /
    • 제4권3호
    • /
    • pp.292-298
    • /
    • 2016
  • 본 연구에서는 매스 매트 콘크리트에 있어, 상 하부를 구분하여 타설하는 실무조건을 고려하여, 상부 및 하부배합의 혼화재 종류와 치환율을 동일 및 달리하는 배합 조건 변화로부터 최적치를 도출한 다음, 실구조체에 적용하여 해석치와 실측치간을 비교하므로서, 혼화재를 활용한 매스콘크리트의 효율적인 수화열균열 저감방안을 제안하고자 하였다. 연구결과 먼저, 현장적용 전 사전검토를 위해 Midas gen을 이용하여 수화열 해석을 실시한 결과 상부는 OPC : FA = 85 : 15 배합, 하부는 OPC : FA : BS = 50 : 20 : 30 배합을 본 대상 구조물 매스 매트콘크리트의 최적배합으로결정하였다. 이를 적용한 실제 현장의 시험결과 슬럼프, 공기량 및 압축강도는 모두 목표범위를 만족하였다. 또한, 봄철 실제 현장의 매스 매트콘크리트의 온도특성으로 최적배합의 경우는 중심부의 최고 온도 약 $59^{\circ}C$, 표층부 온도 약 $49^{\circ}C$로 나타나, 약 $10^{\circ}C$의 온도차가 나타났으며, 수화열 해석결과 약 1.4의 균열지수를 나타내었다. 따라서, 실무를 고려한 매스 매트콘크리트의 경우 상 하부 타설 콘크리트간의 저발열 배합정도를 달리 고려하는 수화발열량차 공법적용은 침하균열 방지 및 수화열 균열제어에 효과적인 방법이 될 것으로 사료된다.

통일신라시대(統一新羅時代) 불교건축(佛敎建築)의 변화(變化) (The Change in the Buddhist Architecture of the Unified Silla Period (668-935))

  • 김성우
    • 건축역사연구
    • /
    • 제1권2호
    • /
    • pp.68-84
    • /
    • 1992
  • The development of Buddhist architectures of the Unified Silla period have been generally understood to have paired pagoda instead of one which had been popular until before the unification. Besides the stylistic categorization of paired pagoda system, there had been no further investigation reported concerning whether there was any detailed process of change within the development of paired pagoda style. This paper aims to identify such change inside the development of paired pagoda style, which, externally, seems to be the same pattern of site design maintained throughout the period of Unified Silla that lasted for about three centuries. Since the temple sites of study are in the same pattern of layout, the method of investigation has to be such that can identify the subtle changes that, in external appearance, are not easily discernible. Hence, this research compared the dimensions of important measurement of five temple sites to be able to clarify the process of minor changes. Among many sites of Silla temples, only five were suitable for the research since detailed measurement were possible through field research or the report of excavation. They are the sites of Sachonwang-sa, Mangduk-sa, site of Kunsuri, and Bulguk-sa. Although the five sites have the same style of paired pagoda, it is clear that there were consistant flow of change. Even though the motivation of such change were not strong enough to change the site pattern itself, it resulted continuous minor changes such as the size and location of architectures. The size of image hall, for example, was growing larger and larger as time goes on, while, the size of Pagoda was getting smaller. In the same way, the size of middle gate became smaller while the size of lecture hall became larger, although the rate of change in these cases were not as severe as that of image hall and pagoda. At the same time, pagoda was coming closer to the middle gate leaving larger space in front of the image hall. Such aspect is even more meaningful considering the fact that the pagoda, from the 8th century in Japan and China, moved outside of the major precinct. The image hall, too, moved toward the middle gate slightly so that the space in front of the lecture hall became more spacious. Such changes, of course, were not accidental but they are the same continuous motivation of change that caused the changes before the period of unification. Enlargement of image hall and reduction of pagoda, for example, represent the changing relative importance of religious meaning. Hence, it is evident that one can not easily imterprete the development of one style only by categorizing it to be one same style. In the veiwpoint of the underlying motivation of change, the fact that one style persisted for a certain period of time, does not mean there had been no change, but means that it was the time of motivational accumulation, causing minor changes within the same style, to be able to create major change coming after.

  • PDF

주거환경개선사업이후 주거 환경 변화에 관한 연구 - 대구광역시 주거환경개선사업의 물리적 환경 분석을 중심으로 - (A Study on the Changes in Residential Environments after Residential Environments Improvement Projects)

  • 김영화;이상홍
    • 대한건축학회논문집:계획계
    • /
    • 제34권10호
    • /
    • pp.3-12
    • /
    • 2018
  • This research aims at analyzing the changes in residential environment after a residential environment improvement project focusing on the analysis into the physical environment of a residential environment improvement project, and examining in what direction the changes by residents' own efforts occurred after public support, such as infrastructure. The present residence development method has become different from the previous pulling down method and is focused on regeneration. By examining in what direction the target residence is being changed because of the development by residents' own efforts after the government's public investment at this time, this study also aims at investigating the direction to develop a guideline for residential improvement for later improvement of deteriorated residence. As for the contents of the analysis, changes in public support, such as infrastructure, and other areas after the residential environment improvement project were compared and analyzed from the land use, street system, and condition of buildings before the residential environment improvement project through field survey, geographic information system(GIS), registered land and building data and so on. The biggest change since the support from the government was that at the beginning of the project, the application of special provision of building laws and different financial supports led to lots of newly built buildings. Since then, their number has decreased rapidly, and in most cases, there have been some changes in part, such as changes in the use of land or repair of disposal tanks. Most newly built buildings were multi-household houses, and it has caused road capacity and parking lot capacity, etc., to be exceeded, which has worsened the pleasantness of the living environment. In addition, other problems have also appeared, for example, the lack of residence supporting facilities yet with a higher level of residential density. Regarding the changes in the residential environment after the residential environment improvement project, maintenance of houses were conducted in some degree as diverse alleviation policies to improve poor residence, yet the absence of the guideline for the direction of developing the whole district has made the residence environment more dense and deteriorated. To solve these problems, in advance to a residential improvement project, specific management methods based on short-, mid- and long-term plans for the direction of development by residents' own efforts and a sustainable guideline seem to be necessary.

IPA분석을 이용한 저층주거지 내 어린이공원 주변공간의 환경계획요인에 관한 연구 - 이용자 의식조사를 중심으로 - (Study on Environmental Project Factors in Peripheral Spaces around Children's Parks within Low-rise Housing Areas by Using IPA Analysis - Focusing on user consciousness survey -)

  • 배연희;변기동;하미경
    • 대한건축학회논문집:계획계
    • /
    • 제35권1호
    • /
    • pp.73-81
    • /
    • 2019
  • The purpose of this study is to draw safe environmental project factors for enhancing the safety of children in peripheral space around children's park and suggest environmental project measures for peripheral spaces around children's parks, based on the survey of children's park users' consciousness on peripheral spaces. Physical space range for this study was limited to low-rise housing area wihtin the radius of 250m, as peripheral spaces around children's parks in which children's playgrounds were built. In addition, the target areas for examining users' consciousness on peripheral spaces around children's parks were selected according to following criteria. 1)areas with highter portion of children; 2) those with higher portion of single-family houses/multi-housing/tenement houses, which constitute low-rise housing areas; and 3) those with higher safety accident rate of children, which was measured based on criminal and traffic accidents. The finding are as follows: first, users' consciousness on safety accidents that are likely to occur in peripheral spaces around children's parks was examined to show that there is most prominent difference between satisfaction and necessity. This result suggests that users are clearly conscious of the necessity of environmental improvement rather than the satisfaction with the current peripheral environment around children's park.; second, for the difference between satisfaction with and necessity of environmental project factors for access/boundary spaces around children's pakrs, there is most significant difference between the satisfaction with and the necessity of establishment of facilities against illegal parking for clear visibility of community roads, for access spaces, and the separate establishment of bicycle racks around main entry into parks, for boundary spaces. Users' necessity of the establishment of them is judged to be derived from the fact that the safety of children and even adults is threatened, because bicycles invaded into the deep inside of children parks. This study analyzed a correlation between satisfaction and necessity through factor and IPA analysis, and should be initially considenred if the future environmental improvement project would be conducted to promote safe environment in peripheral spaces around children's parks in the future. It will be necessary to provide practical environmental project factors through a field investigation.

스케치업을 활용한 3D 건축모델링 및 물량산출 (3D Architecture Modeling and Quantity Estimation using SketchUp)

  • 김민규;엄대용
    • 예술인문사회 융합 멀티미디어 논문지
    • /
    • 제7권6호
    • /
    • pp.701-708
    • /
    • 2017
  • 건축공사는 설계단계에서 도면을 바탕으로 예상되는 비용이 산정되며, 소요예산의 책정과 예산에 합당한 효율적 공사 방안을 찾게 된다. 정확한 물량산출과 예산책정은 공사의 수익성 여부를 판단하는 척도 중 하나로 매우 중요하다. 하지만 이러한 과정이 대부분 인력이나 2D 도면에 의존하여 수행되기 때문에 오차가 발생하기 쉬웠고, 자동화가 가능한 BIM(Build Information Modeling) 프로그램은 매우 고가이기 때문에 현장에서 적용하기 어려운 시점이다. 이에 본 연구에서는 3차원 모델링 소프트웨어인 스케치업을 이용하여 3D 건축모델링을 수행하고, 물량산출을 할 수 있는 방법론을 제시하고자 하였다. 연구 결과, 건축물의 2D 도면을 이용하여 효과적으로 3D 모델링을 수행하였으며, 모델링 결과를 기반으로 2D 도면과 3D 모델링을 통한 물량산출의 차이를 산출할 수 있었다. 연구를 통해 스케치업을 활용한 3D 모델링과 물량산출이 기존의 2D 산출식의 오류를 방지할 수 있다는 가능성을 제시하였다. 지속적인 연구를 통해 연구방법의 활용성이 검증된다면 건축 모델링과 물량산출 업무 효율성 증가에 크게 기여할 것이다.

3D 스캔 분석을 통한 전통조경 계획 및 설계 활용방안 (A Measure of Landscape Planning and Design Application through 3D Scan Analysis)

  • 신현실
    • 한국전통조경학회지
    • /
    • 제36권4호
    • /
    • pp.105-112
    • /
    • 2018
  • 본 연구는 조경계획 및 설계 분야에 3D 스캔기술을 적용하기 위한 연구로 전통조경공간 계획설계에 대한 디지털화 방안을 모색하고자 담양 소쇄원과 성락원을 대상으로 3D 스캔을 실시한 결과는 다음과 같다. 첫째, 3D 스캔을 통한 전통정원의 실측 결과 각 관측지점에서 취득한 점 데이터를 기반으로 좌표값의 병합, 데이터의 후처리 과정을 통해 ${\pm}3-5mm$ 오차의 정밀한 3차원의 모델링을 구축 되는 것을 확인하였다. 둘째, 3D 측량 결과 소쇄원의 경우는 제월당, 광풍각과 주변의 담장과 석축, 애양단 담장 등에 대한 측량 데이터를 얻었으며 성락원은 영벽지 일대의 지형과 바위각자, 송석정 일대의 암반부와 수로 주변에 대한 측량 데이터를 얻었다. 위의 자료들은 정원의 변화모습도 모니터링 할 수 있다는 장점이 있다. 셋째, 3D 스캔을 통해 구축된 공간정보는 정밀실측데이터를 포함하고 있는 3차원상의 도면 작성과 점검 툴을 구축할 수 있으며, 이러한 과정은 조경공간의 실측과 조사 과정에서 시간과 인력에 대한 경제성을 확보할 수 있었다. 또한 3차원상의 1:1 스케일을 지닌 모델링은 설계 규모에 따라 신뢰할만한 공간데이터가 유지된 채 특정 크기로 재가공할 수 있다는 점에서 효율성이 높을 것으로 기대된다. 이외에 장기적 관점에서 3D 스캔 데이터의 구축은 시간의 경과에 따른 전통조경공간의 변화를 예측하고 시뮬레이션 하는데 용이하다.

SNS기반 건설현장 정보소통 및 공유 시스템 구축 (An SNS Based Construction Information Communication and Sharing System)

  • 안재상;김남호;진상윤
    • 한국건설관리학회논문집
    • /
    • 제15권5호
    • /
    • pp.115-126
    • /
    • 2014
  • 건설 프로젝트에서의 정보관리를 위해 PMIS와 같은 IT기반 서비스들이 활용되고 있지만 실제 현장에서는 발생 정보에 대한 신속한 대처 및 정보손실, 보안위험 등의 문제를 해결해 주지 못하고 있다. 따라서 본 연구는 최근 기업 내 참여와 정보공유의 목적으로 사용되고 있는 SNS를 건설현장에 도입하고 이를 활용한 건설 정보 관리 체계를 제안하였다. 이를 위해 문헌 고찰과 현장 인터뷰를 통해 요구사항을 분석하고 활용 전략을 수립하여 시스템을 개발하였으며 실제 현장에서의 정보관리 체계 구축 가능성 여부를 위해 성능 테스트를 실시하여, 개발 결과물 및 이를 활용한 정보 관리 체계가 건설 현장에서 효율적인 정보 관리에 도움을 줄 수 있다는 것을 검증하였다.

지하층이 있는 구조물의 지진응답을 위한 원심모형실험 (Centrifuge Test for Earthquake Response of Structures with Basements)

  • 김동관;박홍근;김동수;하정곤
    • 한국지진공학회논문집
    • /
    • 제20권4호
    • /
    • pp.223-234
    • /
    • 2016
  • To investigate earthquake responses of structures with basements affected by soil deposits, centrifuge tests were performed using an in-flight earthquake simulator. The test specimen was composed of a single-degree-of-freedom structure model, a basement and sub-soil deposits in a centrifuge container. The test parameters were the dynamic period of the structure model, boundary conditions of the basement, existence of soil deposits, centrifugal acceleration level, and type and level of input earthquake accelerations. When soil deposits did not exist, the earthquake responses of the structures with fixed basement were significantly greater than those of the structure without basement. Also, the earthquake responses of the structures with the fixed basement surrounded by soil deposits were amplified, but the amplifications were smaller than those of the structures without basement. The earthquake responses of the structures with the half-embedded basement in the soil deposits were greater than those estimated by the fixed base model using the measured free-field ground motion. The test showed that the basement and the soil deposit should be simultaneously considered in the numerical analysis model, and the stiffness of the half-embedded was not effective.