• 한국추진공학회지
• /
• 제15권4호
• /
• pp.85-93
• /
• 2011

아크 채널 모델을 이용하여 플라즈마 온도를 매개로 플라즈마 입력전력과 전류 조건에 따른 간극 반지름(R) 및 간극팩 묶음 길이(L) 변수 계산이 가능한 해석해를 유도하고 이를 이용하여 300 A 전류조건에서 0.4 MW 급 분절형 아크 플라즈마 토치에 대한 해석적 설계 변수 해석을 수행하였다. 해석 결과, R��${\leq}$ 7.5 mm, L ${\leq}$ 1.25 m 인 범위에 대해, L이 길어지거나 R이 작아질 때, 플라즈마 온도는 비례하여 증가하는 경향을 가지고 있음을 알 수 있었으며, 그 이상의 범위에서는 증가하다 감소하는 비선형 현상이 존재하여 주어진 전류 및 전력조건에서 아크 플라즈마의 형성이 불가능하거나 불안정할 것으로 예측되었다. 이와 같은 결과를 바탕으로 입력전류가 300 A 일 때, 아크 플라즈마 온도를 안정적으로 구현할 수 있을 것이라 여겨지는 0.4 MW 급 분절형 아크 플라즈마 토치의 간극 반지름 R 및 간극팩 묶음 길이 L의 설계범위를 각각 5.5 mm ${\leq}$ R ${\leq}$ 7.5 mm, 0.25 m ${\leq}$ L ${\leq}$ 0.5 m 범위로 제안하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.32-35
• /
• 2003

In this paper, we describe how to represent lower case hand-written English alphabets by a sequence of two to seven fuzzy sets. Each fuzzy set represents an arc segment of the character and each arc segment is assumed to be a part of an ellipse. The part of an ellipse is defined by five quantities: its short and long radii, its orientation angle, whether it is a part of the lower half or the upper half and whether it is the full half or a part of a half. Hence, we use the Cartesian product of five fuzzy sets to represent each arc segment. We show that this representation is a translation, rotation, and scaling invariant and that it can be used to generate the hand-written English alphabets. The representation we describe is different from the one proposed earlier by the author and when compared with the previous representation, the one described in this paper simulates more closely the behavior of how one writes English characters.

• Molecules and Cells
• /
• 제23권1호
• /
• pp.88-93
• /
• 2007

Neuropeptide Y (NPY) is an orexigenic and hypothermic peptide. To understand its role in hypothermic conditions, male rats were placed in a $24^{\circ}C$ or $4^{\circ}C$ air chamber for 1.5 h. The expression of c-Fos protein, and NPY mRNA and protein, was analyzed in the hypothalamus 1 h-2 h later. The cold treatment increased the number of c-Fos-immunoreactive cells in the paraventricular hypothalamic nucleus (PVN) and arcuate nucleus (ARC). At the same time it decreased the density of NPY-immunoreactive components in the PVN, dorsomedial hypothalamic nucleus and ARC, as well as of NPY transcripts in the PVN and ARC. No colocalization of c-Fos with NPY was detected. These results suggest that short-term cold exposure should reduce indirectly NPY production in some hypothalamic nuclei to facilitate thermogenesis without inducing feeding behavior.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.343-348
• /
• 2015

In this paper, arc Zn thermal spray coating was carried out on the SS400 steel, and then various electrochemical characteristics and surface damage behavior of Zn thermal spray coating layer were analyzed. As the results, the potential of Zn thermal spray coating layer presented driving voltage above 300 mV compare to that of SS400 steel. The passivity characteristic in anodic polarization curve was not presented. It was adequate to as sacrificial anode material. In the surface damage after galvanostatic experiments, uniform corrosion tendency of Zn thermal spray coating layer was clearly observed with acceleration of the dissolution reaction. In conclusion, Zn thermal spray coating could be determined to represent the corrosion protection effect by stable sacrificial anodic cathodic protection method in seawater because it had sufficient driving voltage and uniform corrosion damage tendency for the SS400 steel.

• 한국표면공학회지
• /
• 제49권1호
• /
• pp.32-39
• /
• 2016

In this study, Al and Zn arc thermal spray coatings were carried out onto the substrate of SS400 steel to improve corrosion resistance and durability of hull structural steel for ship in marine environment. Therefore cavitation-erosion test was conducted to evaluate the durability of painted and thermal spray coated specimens. And then the damaged surface morphology and weight loss were obtained to compare with each other, respectively. As a result, the painted specimen was the poorest cavitation resistance characteristics because surface damage behavior appeared to be exfoliated in bulk shape during the cavitation experiment. And Zn thermal spray coating layer presented the significant surface damage depth due to relatively low surface hardness and local cavitation damage tendency. On the other hand, as a result of the weight loss analysis, the painting layer presented the poorest cavitation resistance and the Al thermal spray coating layer relatively showed the best results after cavitation experiment.

• Steel and Composite Structures
• /
• 제38권3호
• /
• pp.271-280
• /
• 2021

In this study, the fatigue property of U rib-to-crossbeam connections in orthotropic steel bridge (OSB) crossbeams under heavy traffic vehicle load was investigated considering the effects of in-plane shear stress. The applicability of an improved structural stress (ISS) method was validated for the fatigue behavior analysis of nonwelded arc-shaped cutout regions in multiaxial stress states. Various types of fatigue testing specimens were compared for investigating the equivalent structural stress, fatigue crack initiation positions, and failure modes with the unified standards. Furthermore, the implications of OSB crossbeams and specified loading cases are discussed with respect to the improved method. The ISS method is proven to be applicable for analyzing the fatigue property of nonwelded arc-shaped cutout regions in OSB crossbeams. The used method is essential for gaining a reliable prediction of the most likely failure modes under a specific heavy traffic vehicle load. The evaluated results using the used method are proven to be accurate with a slighter standard deviation. We obtained the trend of equivalent structural stress in arc-shaped cutout regions and validated the crack initiation positions and propagation directions by comparing them with the fatigue testing results. The implications of crossbeam spans on fatigue property are less significant than the effects of crossbeams.

• 한국표면공학회지
• /
• 제53권2호
• /
• pp.59-66
• /
• 2020

Effects of Na₂SiO₃ concentration added into 0.1 M NaOH + 0.05 M NaF solution on the formation behavior and properties of PEO films on AZ91 Mg alloy were investigated under 1200 Hz of alternating current (AC) by voltage-time curves, in-situ observation of arc generation behavior and measurements of film thickness, surface roughness and micro vickers hardness. In the absence of Na₂SiO₃ in the 0.1 M NaOH + 0.05 M NaF solution, about 4 ㎛ thick PEO film was formed within 1 min and then PEO film did not grow but white spots were formed by local burning. Addition of Na₂SiO₃ up to 0.2 M caused more increased formation voltage and growth of PEO film with uniform generation of arcs. Addition of Na₂SiO₃ from 0.2 M to 0.4 M showed nearly the same voltage-time behavior and uniform arc generation. Addition of Na₂SiO₃ more than 0.5 M resulted in a decrease of formation voltage and non-uniform arc generation due to local burning. PEO film growth rate increased with increasing added Na₂SiO₃ concentration but maximum PEO film thickness was limited by local burning if added Na₂SiO₃ concentration is higher than 0.5 M. Surface roughness of PEO film increased with increasing added Na₂SiO₃ concentration and appeared to be proportional to the PEO film thickness. PEO film hardness increased with increasing added Na₂SiO₃ concentration and reached a steady-state value of about 930 H_V at more than 0.5 M of added Na₂SiO₃ concentration.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.731-736
• /
• 2001

Nowadays various simulation tools are widely used for the design and the analysis of power electronic converters. From the engineering point of view it is rather difficult to parameterize power semiconductor device models without the knowledge of basic physical parameters. In recent years some data sheet driven behavioral models or so called 'wizard' tools have been introduced to solve this problem. In this contribution some experiences with some user-friendly power semiconductor models will be discussed. Using special simulation test circuits it is possible to get information on the static and dynamic behavior of the parameterized models before they are applied in more complex schemes. These results can be compared with data sheets or with measurements. The application of these models for power loss analysis of inverter type arc welding power sources will be described.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.1-4
• /
• 2000

This paper addresses a modified arc-length method for the nonlinear finite element analysis of a structure which is loaded in incremental and fixed forces, simultaneously. The main idea of the method is to separate the displacement term by the constant force from that by the incremental force. As the illustrative examples of the applicability of the present algorithm, a parametric study is performed on the nonlinear buckling behavior of composite cylindrical panels under the combined load of the incremented compression and the constant lateral pressure.

• 한국표면공학회지
• /
• 제35권3호
• /
• pp.165-171
• /
• 2002

TiN coating were deposited onto different WC-Co substrates using arc ion plating (AIP) technique. The structure and morphology for the deposited coating were characterized by x-ray diffraction (XRD) and scanning electron microscopy (SEM). The adhesion behavior of the deposited TiN coating was investigated with a conventional scratch test. Effects of WC particle size and Co content on the adhesion strength between the deposited TiN coating and substrate were studied. During the scratch test, the value of critical load was dependent of WC particle size and Co content on substrate. As the WC particle size and Co content on substrate decreased, the critical load increased. The highest critical load, approximately 110N, was obtained at WC particle size of 1$\mu\textrm{m}$ and Co content of 10wt.%.