• 대한기계학회논문집B
• /
• 제31권10호
• /
• pp.832-839
• /
• 2007

The geometry and dimensions of an expansion chamber are decisive factors in thermal puffer plasma chamber designs. Because they together dominate the temperature and speed at which the cooling gas from the chamber flows back through a flow channel to the arcing zone for the successful interruption of fault currents. In this study, we calculated the flow and mass transfer driven by arc plasma, and investigated the effects of a flow guide installed inside a thermal puffer plasma chamber. It is found that the existing cold gas of the chamber mixes with hot gases entrained from the arcing zone and is subjected to compression due to pressure build-up in the chamber. The pressure build-up with the flow guide is larger than that without due to a vortex which rotates clockwise around the chamber center. By the reverse pressure gradient, the mixing gas of the chamber flows back out for cooling down the residual plasma near current zero. In the case with the flow guide, the temperature just before current zero is lower than that without, and the Cu concentration with high electrical conductivity is also less than that without the flow guide.

• 한국소음진동공학회논문집
• /
• 제21권2호
• /
• pp.146-153
• /
• 2011

Model based machine condition diagnosis methods are generally using a normal and many failure models which need sufficient data to train the models. However, data, especially for failure modes of interest, is very hard to get in real applications. So their industrial applications are either severely limited or impossible when the failure models cannot be trained. In this paper, continuous hidden Markov model(CHMM) with only a normal model has been suggested as a very promising machine condition diagnosis method which can be easily used for industrial applications. Generally hidden Markov model also uses many pattern models to recognize specific patterns and the recognition results of CHMM show the likelihood trend of models. By observing this likelihood trend of a normal model, it is possible to detect failures. This method has been successively applied to arc weld defect diagnosis. The result shows CHMM's big potential as a machine condition monitoring method.

• 한국항공우주학회지
• /
• 제32권9호
• /
• pp.65-71
• /
• 2004

여유 조종면은 고성능 비행 모드 혹은 내고장 제어를 가능하게 하기 때문에 현대의 항공기 설계에 많이 채택되고 있으며, 효율적인 관리 방안이 필요하다. 본 논문에서는 여유 조종면 관리 방안의 하나로 조종력을 할당하는 문제를 다루며, 기존의 방법에 비해서 성능이 향상된 의사역행렬 재분배 기법을 제시한다. 기존의 의사역행렬 재분배 기법은 의사 역행렬 계산에서 포화가 일어나는 모든 조종력을 동시에 한계 값으로 설정하였지만, 수정 된 기법은 하나의 조종력만을 한계 값으로 설정하고 나머지를 재분배하는 방법이다. 수치 예제를 이용하여 기존의 기법과 제안한 기법의 성능을 비교하였으며, 더 뛰어난 성능을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.433-436
• /
• 2004

In this paper, we studied on the electrical safety evaluations of transformer insulation cover. In order to take preventive measures against an electric shock disaster in 22.9kV transformer installation, we put the insulation cover on a transformer charging parts. It needs to be designed so that the insulation covers have superior properties such as, arc-resistance, weather-resistance and heat-resistance, because they are used until the damage and destruction occur. To establish the protection cover to reduce the electrical shock, we analyzed damage mechanism and risk factors which happened by structural fault of an insulation cover in this paper. Also, based on the experimental results, we are planing to suggest new improved insulation cover models.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 전기설비
• /
• pp.19-22
• /
• 2006

The CMD(Condition Monitoring & Diagnosis) System is used to monitor and analyze the PD(Partial Discharge), Arc, Temperature, Pressure, Gas in Oil and so on for reliability and availability of the substation. Although this system comes into the spotlight as the forecast and management of the failure and fault, there are some problems. For example, the unified standard was not defined, and the effective management of the layed communication network does not performed, limitation of physical space, etc. To resolve above problems, this paper suggests the IEC61850 compatible eCMD system architecture for monitoring and analyzing the CMD factor in substations. The suggested eCMD system consists of CMD-LU(Condition Monitoring & Diagnosis-Local Unit), IED(Intelligent Electronic Device), and engineering centers. The IEC61850 is the international standard that defines communication networks and system in substation.

• 한국안전학회지
• /
• 제34권3호
• /
• pp.15-20
• /
• 2019

As industry is progressing and standards of living are improved, the demand of electrical energy is expected to grow 8-9% annually. Therefore, the importance of electrical fire prevention technology with the ability of the power supply is being emphasized. According to the statistics of fire in Korea, fire occurred about 45,000 cases annually, and electrical fire possessed about 20%. The electrical fire by poor contact has increased gradually, can be connected as great fire to secondarily induce short circuit and earth fault. Then analysis of heating causes of electrical connections between copper and copper alloy is needed. Also, detection and analysis algorithm of oxide at copper alloy are necessary. In this research, in order to understand the characteristics of oxide growth with rising resistance and heating, it is demonstrated that the oxide at electrical connections can cause fire due to arcing.

• 지구물리
• /
• 제2권1호
• /
• pp.75-88
• /
• 1999

물리탐사의 최근 주된 관심 분야는 대상지역에 대한 각종 탐사자료를 복합적으로 해석하여 탐사대상의 지하구조를 3차원적으로 정확히 규명하는 작업이다. 이 연구에서는 연구 지역에 대한 1차원의 슐럼버져배열 전기비저항 수직탐사를 2차원 및 3차원적으로 확장·해석하기 위해 먼저 전기비저항 자료를 영상화한 뒤 이들을 서로 보간하여 전기비저항의 단면·입체도를 재건하였다. 파쇄대와 같은 전기비저항 불연속면은 재건된 단면·입체도에서 더욱 공간적으로 파악될 수 있었고 대상지역의 파쇄대와 관련된 것으로 보이는 저비저항대는 지역의 중앙부에서 화강암질 기반암 하부까지 확장된 것으로 나타난다. 선구조 부근의 탄성파속도는 약 3,000 m/s로서 주위에 비해 작게 나타나며 이를 축으로 풍화대의 깊이는 남동쪽이 북서쪽보다 상대적으로 큰 것으로 해석되었다. 초정지역에 대한 전기비저항, 탄성파속도, 방사능 등의 속성자료는 지리정보시스템 소프트웨어인 ARC/INFO를 이용하였고 복합해석도의 영상강화를 통해 나타난 주요 단열 및 파쇄대는 전기비저항과 탄성파속도가 모두 낮게 나타나는 대상지역의 남동부에 많이 발달한 것으로 보인다. 이에 반하여 방사능 자료는 전기비저항, 탄성파 속도와 비교할 때 지질경계면에서 잘 반응하지 못한 것으로 나타난다.

• 지구물리
• /
• 제9권3호
• /
• pp.189-197
• /
• 2006

The Korea Plateau is a continental fragment rifted and partially segmented from the Korean Peninsulaat the initial stage of the opening of the East Sea (Japan Sea). We interpreted marine seismic profiles from the South Korea Plateau in conjunction with swath bathymetric to investigate processes of con-tjnental rifting and separation of the southwestern Japan Arc. The SouU-i Korea Plateau preserves funda-mental elements of rift architecture comprising a seaward succession of a rift basin and an uplifted rift flank passing into the slope, typical of a passive continental margin. Two distinguished rift basins (Onnuri and Bandal Basins) in the South Korea Plateau are bounded by major synthetic and smaller antithetic faults, creating wide and symmetric profiles. The large-offset border fault zones of these basins have convex dip slopes and demonstrate a zig-zag arrangement along strike. Rifting was primarily controlled by normal faulting resulting from extension orthogonal to the inferred line of breakup along the base ofthe slope rather U-ian strike-slip deformation. Two extension direcdons for rifdng are recog-nized; U-ie Onnuri Basin was rifted in U-ie EW direction; U-ie Bandal Basin in U-ie EW and NW-SE directions, suggesting two rift stages. We interpret that the E-W direction represents initial rifting at the inner margin; while the Japan Basin widened, rifting propagated repeatedly from the Japan Basin to the southeast toward the Korean margin but could not penetrate the strong continental lithosphere of the Korean Shield and changed direction to the south, resulting in E-W extension to create the rift basins at the Korean margin. The Hupo Basin to the south of the Korea Plateau is estimated to have formed in this process. The NW-SE direction probably represents the direction of rifting orthogonal to the inferred line of breakup along the base of the slope of the South Korea Plateau; after breakup the southwestern Japan Arc separated in the SE direction, indicating a response to tensional tectonics associated with the subduction of the Pacific Plate in the NE direction. We suggest that structural evolution of the eastern Korean margin can be explained by the processes occurring at the passive continental margin.

• 암석학회지
• /
• 제25권3호
• /
• pp.169-193
• /
• 2016

한반도 일원의 신기 지각변형과 현생 응력장의 특징을 규명하고 지구조적 형성 배경을 이해하기 위해, 제4기 단층과 발진기구해에 관한 기존 자료와 더불어 최근의 지각천부 시추공 응력자료를 종합하여 재분석하였으며, 마이오세 이후 동아시아 일원의 지구조 환경 변화와 지각변형 특징을 정리하였다. 한반도 남동부의 제4기 단층은 대부분 기존 단층대를 따라 발견된다. 또한 대부분 남-북으로 배열된 상반 서향의 충상단층의 기하와 운동특성을 보이며, 동-서 방향의 순수 압축응력 하에서 적절히 배향된 기존 약대가 재활된 특징을 보인다. 한반도와 인근 해역의 발진기구해 분석 결과, 내륙에서는 주향이동단층 또는 역이동성 운동감각을 포함하는 주향이동단층이 우세한 반면, 동해와 서해 연안의 경우에는 역단층이 우세한 특징을 보인다. 압축 축은 동북동과 서남서를 향해 수평 내지 아수평한 자세로 군집되며, 인장 축은 북북서-남남동 주향을 가지는수직의 대원 상에 배열된다. 시추공 내 응력측정 자료를 취합한 결과, 한반도 지각천부의 평균 최대수평응력은 동북동-서남서 방향으로 나타났다. 따라서 한반도 일원은 현재 광역적인 동북동-서남서 내지 동-서 방향의 압축력에 의한 압축구조가 발달중인 것으로 판단된다. 동아시아 일원의 광역적인 현생 응력장 분포와 비교한 결과, 이러한 동북동-서남서 내지 동-서 방향의 압축응력환경은 태평양판의 서향 저각 섭입과 인도-유라시아 충돌로부터 전파된 응력장이 중첩된 결과로 판단되며, 대부분 고각 섭입의 양상을 보이는 필리핀해판은 배호지역 내에서 인장 환경의 특징을 보여주고 있어 한반도에서의 영향은 미미한 것으로 판단된다. 이상과 같은 동아시아 일원의 신기 지구조환경과 지각변형은 약 5~3.2 Ma 경 태평양판의 이동방향과 섭입각도의 변화와 함께 시작된 것으로 해석된다.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2109-2112
• /
• 2016

The rate of rise of the fault current in DC grids is very high compared to AC grids because of the low line impedance of DC lines. In AC grids the arc of the circuit breaker under current interruption is extinguished by the zero current crossing which is provided naturally by the system. In DC grids the zero current crossing must be provided by the circuit breaker itself. Unlike AC girds, the magnetic energy of DC grids is stored in the system inductance. The DC circuit breaker must dissipate the stored energy. In addition the DC breaker must withstand the residual overvoltage after the current interruption. The main contents of this paper are to ${\cdot}$ Explain the theoretical background for the design of DC circuit breaker. ${\cdot}$ Develop the simulation model in PSIM of the real scaled DC circuit breaker for 1,800V DC railway. ${\cdot}$ Suggest design guidelines for the DC circuit breaker based on the experimental work, simulations and design process.