• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3185-3194
• /
• 1994

In this study, an impact model and impact response analysis method was suggested for the impacts between arbitrary shaped bodies. Unlike the impacts between geometrically simple structures, there is no rules to analyze the impacts between general elastic structures First of all, it has been attempted to explain the impoot between arbitrary elastic structures as the elastic deformation of a virtual contact spring in the vicinity of contact points. The contact stiffness and the exponent are determined from the Hertz's contact theory and F. E. analysis. In order to evaluate the validities and limitations of the proposed methods, an impact tester and the miniature of container, missile and isolators have been provided and tested experimentally. All the experiments were performed with various impact conditions. The results obtained by the proposed methods were directly compared with the measured values in terms of maximum contract force, contact duration, the shape of contact force and the structure responses. The computed contact force and responses, using this proposed methods, were very close to the measured results, unless any plastic deformations were presented.

• Journal of Mechanical Science and Technology
• /
• 제19권2호
• /
• pp.549-557
• /
• 2005

The requirements of multi-resolution models of feature-based solids, which represent an object at many levels of feature detail, are increasing for engineering purposes, such as analysis, network-based collaborative design, virtual prototyping and manufacturing. To provide multi-resolution models for various applications, it is essential to generate adequate solid models at varying levels of detail (LOD) after feature rearrangement, based on the LOD criteria. However, the non-commutative property of the union and subtraction Boolean operations is a severe obstacle to arbitrary feature rearrangement. To solve this problem we propose history-based Boolean operations that satisfy the commutative law between union and subtraction operations by considering the history of the Boolean operations. Because these operations guarantee the same resulting shape as the original and reasonable shapes at the intermediate LODs for an arbitrary rearrangement of its features, various LOD criteria can be applied for multi-resolution modeling in different applications.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.292-295
• /
• 2003

Moire topography method is a well-known non-contacting 3-D measurement method. the automatic 3-D measurement by moire topography has been required since the method was frequently applied to the engineering and medical fields. 3-D measurement using digital projection moire topography is very attractive because of its high measuring speed and high sensitivity. In this study, digital two-wavelength phase shilling moire is applied to the entertainment fields. recently. as promoting the growth of the VR-Game, display devices which attract public attention such as HMD or Projector are being appeared in order to deliver effectively the absorption sense. this study realized the Auto-calibrating system for arbitrary display surface using digital moire method which satisfied the shape measurement of display surface and the request of FOV(Field of View) output. also when large screen wasn't prepared, this auto-calibrating system was applied to enjoy games or movies at home with a projector and walls

• 태양에너지
• /
• 제9권2호
• /
• pp.31-41
• /
• 1989

The purpose of this research is to study the utility of prediction program like a F.E.M. analysis for energy recovery of heat exchanger with heat pipe which uses arbitrary groove wick. The program is based on the utility by the experimental and applytical method of the single heat pipe. It is also expanded and applied in the prediction program of the heat exchanger. The results are as follows; 1) The effective thermal conductivity of the groove wick with arbitrary shape is counted by the thermal resistance change. 2) The more the number of rows, the more the effect energy recovery changing by the number of rows, the bigger the free velocity, the smaller the effect of energy recovery. 3) The effect of energy recovery increases according to the value of the rate of mass flow (Me/Mc) and also number of rows. 4) The comparison between calculated and data shows good agreement within 2.5% error, therefore the F.E.M. analysis of the study is useful to predict the performance of heat pipe-heat exchanger.

• 제어로봇시스템학회논문지
• /
• 제8권3호
• /
• pp.208-219
• /
• 2002

A novel measurement method to obtain the 6-DOF motions of arbitrary rigid bodies is proposed in this paper. The method adopts a specially fabricated mirror called 3-facet mirror, which looks like a triangular pyramid haying an equilateral cross-sectional shape. The mirror is mounted on the objects to be measured, illuminated by a laser beam having circular profile, and reflects the laser beam in three different directions. Three PSDs(position sensitive detector) detect the three beams reflected by the mirror, respectively. From the signals of the PSDs, we can calculate the 3-dimensional position and orientation of the 3-facet mirror, and thus enabling us to determine the 3-dimensional position and orientation of the objects. In this paper, we model the relationship between the 3-dimensional position and orientation of an object in motion and the outputs of three PSDs. A series of experiments are performed to demonstrate the effectiveness and accuracy of the proposed method. The experimental results show that the proposed sensing system can be an effective means of obtaining 3-dimensional position and orientation of arbitrary objects and provide resonable measurement accuracy.

• 한국융합학회논문지
• /
• 제6권5호
• /
• pp.9-14
• /
• 2015

본 논문에서는 유전체 표면을 소형의 패치로 분해한 다음에 각 패치의 유도전류를 구하는 모먼트법(MoM)과 전체 유전체 표면의 입사전파와 반사 및 침투 전파의 합을 구하는 적분방정식을 융합하여 유전물질로 구성된 육면체의 유도전류 분석하였다. 평면파 전자파가 입사될 때 임의모형의 유전체에 유도되는 유도전류는 일반적으로 수치해석방법을 적용하여 계산하는 것이 정확하며 사용한 적분방정식은 5 명의 과학자가 공동으로 제안한 PMCHW 방정식을 사용하였다. MoM에 사용된 패치는 삼각형 패치를 사용하고 기초함수는 광대역 주파수에 사용할 수 있는 Loop-Patch 기초함수를 사용하였다. 제안된 계산방식은 넒은 주파수 범위에서 임의 모형의 유전체에 대해서 적용할 수 있으며 유전체 육면체의 유도전류를 분석하여 제시하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.478-491
• /
• 2013

Natural vibration analysis of plates with openings of different shape represents an important issue in naval architecture and ocean engineering applications. In this paper, a procedure for vibration analysis of plates with openings and arbitrary edge constraints is presented. It is based on the assumed mode method, where natural frequencies and modes are determined by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange's equations of motion. The presented solution represents an extension of a procedure for natural vibration analysis of rectangular plates without openings, which has been recently presented in the literature. The effect of an opening is taken into account in an intuitive way, i.e. by subtracting its energy from the total plate energy without opening. Illustrative numerical examples include dynamic analysis of rectangular plates with rectangular, elliptic, circular as well as oval openings with various plate thicknesses and different combinations of boundary conditions. The results are compared with those obtained by the finite element method (FEM) as well as those available in the relevant literature, and very good agreement is achieved.

• 한국CDE학회논문집
• /
• 제10권6호
• /
• pp.432-443
• /
• 2005

Recent three-dimensional feature-based CAD systems based on solid or non-manifold modelling functionality have been widely used for product design in manufacturing companies. When product models associated with features are used in various downstream applications such as analysis, however, simplified and abstracted models at various levels of detail (LODs) are frequently more desirable and useful than the full detailed model. To provide multi-resolution models, the features need to be rearranged according to a criterion that measures the significance of the feature. However, if the features are rearranged, the resulting shape is possibly different from the original because union and subtraction Boolean operations are not commutative. To solve this problem, in this paper, the new concept of the effective zone of a feature is defined and identified using Boolean algebra. By introducing the effective zone, an arbitrary rearrangement of features becomes possible and arbitrary LOD criteria may be selected to suit various applications. Besides, because the effective zone of a feature is independent of the data structure of the model, the multi-resolution modelling algorithm based on the effective zone can be implemented on any 3D CAD system based on conventional solid representations as well as non-manifold topological (NMT) representations.

• 대한기계학회논문집A
• /
• 제41권6호
• /
• pp.553-560
• /
• 2017

최근 신체 생물학적 인터페이스와 인체 유사 로봇 공학(Human-like robotics) 분야에서 요구하는 임의적인 형상 제작이 가능하다는 이유로 3D 프린팅 기술에 대한 그 관심이 높아지고 있다. 본 연구의 주된 고려사항은 PDMS로 제작한 탄성 중합체로 지지되는 3D 패키징 생물학적 센서(bio-sensor)의 제작이다. 3D 프린팅 공정을 이용한 PDMS 성형 몰드의 제작은 신체의 표면에 따라 달라지는 임의적인 형상에 적합한 bio-sensor의 제작 뿐만 아니라 고형화 과정 중 균일한 두께분포의 PDMS 성형이 가능하다는 점에서 기존 공정과는 차별화된 중요성을 갖는다. 이와 관련하여 본 연구에서는 몰드를 이용한 PDMS의 제작 과정 중 이형과정 에서의 유연성과 PDMS의 고형화 과정에서 제작 공정의 특성을 만족시키기 위한 PDMS 성형 몰드의 설계에 있어 여러 소재의 부분 별 선택적 배열과 관련한 유한요소해석과 실제 몰드 제작을 통한 실험을 진행하였다.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.33-40
• /
• 2012

The scaffold serves as 3D substrate for the cells adhesion and mechanical support for the newly grown tissue by maintaining the 3D structure for the regeneration of tissue and organ. In this paper, we proposed integrated scaffold fabrication system using multi-axis rapid prototyping (RP) technology. It can fabricate various types of scaffolds: arbitrary sculptured shape, primitive shape, and tube shape scaffolds by layered dispensing biocompatible/ biodegradable polymer strands in designated patterns. In order to fabricate the 3D scaffold, we need to generate the plotting path way for the scaffold fabrication system. We design a data processing program - scaffold plotting software, which can convert the 3D STL file, primitive and tube model images into the NC code for the system. Finally, we fabricated the customized 3D scaffolds with high accuracy using the plotting software and the fabrication system.