• Macromolecular Research
• /
• 제13권3호
• /
• pp.257-264
• /
• 2005

Polyurethanes containing z-Iysine segments in the main chain (PULL) were synthesized from 4,4'-diphe-nylmethyl diisocyanate, poly(tetramethylene glycol), and z-Iysine oligomer as a chain extender. The PULL film was treated first with a $10\%$ HBr-acetic acid solution and subsequently with a saturated sodium bicarbonate aqueous solution to produce a primary amine group on the surface (PULL-N). Lactobionic acid (LA)-immobilized PULL (PULL-L) was prepared by the coupling reaction of the PULL surface amine groups and the LA carboxylic acid groups. The surface-modified PULLs were then characterized by attenuated total reflection-Fourier transform infra-red spectroscopy, electron spectroscopy for chemical analysis, atomic force microscopy, and contact angle goniometry. In the hepatocytes adhesion experiment, the cells poorly adhered to the PULL surface, although they adhered moderately well to the PULL-N surface. On the other hand, the cells adhered well to the PULL-L surface, suggesting the good affinity of the surface $\beta$-galactose moieties for hepatocytes. When hepatocytes were cultured in the presence of epidermal growth factor for 48 h, the cells rapidly aggregated on the PULL-L surface, whereas they aggregated only slowly on the other surfaces. The PULL prepared in this study has the potential to be used as a coating material for the enhancement of hepatocyte adhesion.

• Tribology and Lubricants
• /
• 제30권6호
• /
• pp.343-349
• /
• 2014

Currently, in order to resist the scratching of the fuel rod surface while fabricating the fuel assembly of the light-water nuclear reactor, we use a solution of nitrocellulose, an explosive material, as a dry lubricant along with its solvent. However, the demand for developing safe and harmless aqueous alternative materials for environment-conservation and field-worker safety has increased. In this study, we demonstrate the preparation of a novel aqueous resin composite using a formulation of aqueous polymeric resin, alcoholic solvent, and water. Subsequently, we characterize this composite on the basis of hardness, adhesive property, and water solubility using plates similar to the fuel rod material. The insertion test of a fuel rod coated with the YS-3 composite shows load values of $18.8-20.5kg/cm^2$, which is comparable with $18.8-20.5kg/cm^2$ of the nitrocellulose coating agent. In addition, the depth and width of longitudinal scratches caused by the YS-3 composite test are 50% higher than those of the standard. We can develop a harmless and safe aqueous dry lubricant to replace the existing NC products through field testing of 264 pieces of fuel rods, after producing 350 kg of the YS-3 prototype. The scratch test for the rod surface showed that weight of chip of YS-3 prototype was smaller than that of NC before and after solvent treatment, indicating the properties of YS-3 prototype was comparable to the counterpart.

• Archives of Pharmacal Research
• /
• 제27권1호
• /
• pp.118-126
• /
• 2004

The aqueous extract of European mistletoe (Viscum album, L.) has been used in cancer therapy. The purified mistletoe lectins, main components of mistletoe, have demonstrated cytotoxic and immune-system-stimulating activities. Korean mistletoe (Viscum album L. coloratum), a subspecies of European mistletoe, has also been reported to possess anticancer and immunological activities. A galactose- and N-acetyl-D-galactosamine-specific lectin (Viscum album L. coloratum agglutinin, VCA) with Mr 60 kDa was isolated from Korean mistletoe. Mistletoe preparations have been given subcutaneously due to the low stability of lectin in the gastrointestinal (GI) tract. In the present study, we investigated the possibility of alginate/chitosan microcapsules as a tool for oral delivery of mistletoe lectin. In addition, our strategy has been to develop a system composed of stabilizing cores (granules), which contain mistletoe lectin, extract or powder, coated by a biodegradable polymer wall. Our results indicated that successful incorporation of VCA into alginate/chitosan microcapsules has been achieved and that the alginate/chitosan microcapsule protected the VCA from degradation at acidic pH values. And coating the VCA with polyacrylic polymers, Eudragit, produced outstanding results with ideal release profiles and only minimal losses of cytotoxicity after manufacturing step. The granules prepared with extract or whole plant produced the best results due to the stability in the extract or whole plant during manufacturing process.

• 폴리머
• /
• 제39권2호
• /
• pp.293-299
• /
• 2015

전기 전도성을 갖는 발포체를 개발하기 위해 고내상 에멀젼(HIPE) 중합법으로 폴리스티렌(PS)/폴리도파민-탄소나노튜브(PDA-CNT) 미세기공 발포체를 제조하여 발포체의 모폴로지 및 전기 전도도를 고찰하였다. 전도성을 부여하기 위한 나노충전제로 CNT를 사용하였는데 수분산성과 HIPE의 안정성을 향상시키기 위하여 CNT 표면을 친수성인 PDA로 개질한 PDA-CNT를 사용하였다. PDA-CNT는 분산성이 우수하여 첨가량을 높여 HIPE를 구성할 수 있었고 전도성이 향상된 발포체를 제조할 수 있었다. 제조한 미세기공 발포체는 기공이 상호 연결된 구조의 모폴로지를 보여 주었다. PDA-CNT의 함량 증가에 따라 HIPE의 항복응력 및 저장 탄성률은 증가하였고 제조된 발포체의 기공 크기는 작아졌다. 전기적 임계점을 보여주는 PDA-CNT 함량은 대략 0.58 wt%였고 PDA-CNT 함량을 5 wt% 첨가했을 때의 전기 전도도는 $10^{-3}S/m$를 나타내었다.

• 대한토목학회논문집
• /
• 제44권2호
• /
• pp.183-190
• /
• 2024

폴리우레탄(PU) 폼과 같은 가연성 고분자 건축자재의 화재 안전성을 개선하기 위한 새로운 접근의 나노코팅 기술이 개발되었다. 산화 그래핀 (Graphene oxide, GO)과 같은 2차원 소재는 용액상에서 자기 정렬 및 점탄성적 특성을 보이는 액정성(Liquid Crystalline properties, LC)을 나타내며, 이를 이용하면 특정 농도 범위에서 3차원의 다공성 폼을 포함한 다양한 표면에 균일한 코팅이 가능하다. 또한, GO의 액정성을 이용하여 기능성 복합소재의 나노코팅을 위한 골격 구조체(Scaffold)를 형성할 수 있으며, 여기에 도파민(Dopamine)과 같은 무독성의 항산화성 저분자를 도입 후 폴리도파민(polydopamine, PDA)로의 중합을 유도하여 고난연성의 폴리도파민/산화그래핀 (PDA/GO) 나노복합체 코팅층을 형성할 수 있다. 또한 최종적으로 형성된 PDA/GO 코팅은 GO의 2차원 판상구조로 인하여 균일하게 적층된 나노시트 구조로 안정화되며, 이러한 구조적 특성으로 인하여 가스상의 유해 연소생성물의 발생과 확산을 효과적으로 저감할 수 있는 가스 차폐 효과도 유도할 수 있다. 이러한 2차원 소재의 액정성을 활용한 난연성 나노복합소재 코팅 기술은 다양한 유형의 고분자 건축 자재의 화재 안전성을 효과적으로 개선할 수 있는 친환경적이고 새로운 기술적 접근방식이 될 수 있다.

• Corrosion Science and Technology
• /
• 제21권5호
• /
• pp.340-347
• /
• 2022

In this research, mixed metal oxide (TiO₂, RuO₂) coating was applied to grade 1 titanium as a bipolar plate for polymer electrolyte membrane fuel cell (PEMFC). Electrochemical experiments were carried out in an aqueous solution of pH 3 (H₂SO₄ + 0.1 ppm HF, 80 ℃) determined by DoE. The air was bubbled to simulate a cathode environment. Potentiodynamic polarization test revealed that corrosion current densities of the titanium substrate and MMO-coated specimen were 0.180 µA/cm² and 4.381 µA/cm², respectively. There was no active peak. After potentiostatic experiment, current densities of the titanium substrate and the MMO-coated specimen were 0.19 µA/cm² and 1.05 µA/cm², respectively. As a result of observing the surface before and after the potentiostatic experiment, cracked dried clay structures were observed without corrosion damage. Both the titanium substrate and the MMO-coated specimen could not satisfy the interfacial contact resistance suggested by the DoE. Thus, further research is needed before they could be applied as bipolar plates.

• 멤브레인
• /
• 제22권6호
• /
• pp.481-488
• /
• 2012

폴리아마이드 역삼투막 표면에 음이온 수용성 고분자인 poly(vinyl amine)(PVAm)을 코팅한 후 오염물질인 bovine serum albumin (BSA), humic acid (HA), sodium alginate (SA)에 대하여 파울링 개선효과가 있는지를 알아보고자 하였다. PVAm의 코팅과 파울링 여부는 scanning electron microscopy (SEM)을 통해 관찰하였다. BSA, HA, SA 100 ppm 공급원액을 이용하여 2, 4, 8 bar로 압력을 변화시켜 투과성능실험을 수행한 결과 PVAm으로 코팅되지 않은 막과 코팅된 막 모두 압력증가에 따라 파울링 현상이 심화되었으나 PVAm으로 코팅된 막이 BSA, HA, SA의 경우 모두에서 약 30%이상 투과도가 향상되어 파울링 개선효과가 나타나는 것을 확인할 수 있었다. HA > SA > BSA의 순으로 파울링 개선효과가 나타났으며 HA의 경우 가장 두드러지게 나타났다.

• Corrosion Science and Technology
• /
• 제14권5호
• /
• pp.213-217
• /
• 2015

Recently, household electronic industries require environmentally-friendly and highly functional steels in order to enhance the quality of human life. Customers especially require both excellent corrosion and abrasion resistant anti-fingerprint steels for digital TV panels. Thus POSCO has developed new functional electro-galvanized steels, which have double coated layers with organic-inorganic composites on the zinc surface of the steel for usage as the bottom chassis panel of TVs. The inorganic solution for the bottom layer consists of inorganic phosphate, magnesium, and zirconium compounds with a small amount of epoxy binder, and affords both improved adhesion properties by chemical conversion reactions and corrosion resistance due to a self-healing effect. The composite solution for the top layer was prepared by fine dispersion of organic-inorganic ingredients that consist of a urethane modified polyacrylate polymer, hardener, silica sol and a titanium complex inhibitor in aqueous media. Both composite solutions were coated on the steel surface by using a roll coater and then cured through an induction furnace in the electro-galvanizing line. New anti-fingerprint steel was evaluated for quality performance through such procedures as the salt spray test for corrosion resistance, tribological test for abrasion resistance, and conductivity test for surface electric conductance regarding to both types of polymer resin and coating weight of composite solution. New composite coated anti-fingerprint steels afford both better corrosion resistance and abrasion properties compared to conventional anti-fingerprint steel that mainly consists of acrylate polymers. Detailed discussions of both composite solutions and experimental results suggest that urethane modifications of acrylate polymers of composite solutions play a key role in enhanced quality performances.

• 접착 및 계면
• /
• 제16권1호
• /
• pp.6-14
• /
• 2015

본 연구에서는 양친성 반응성 고분자 전구체를 합성하고 이를 사용하여 화학적, 물리적으로 안정한 코아 가교 양친성 고분자(Core-crosslinked Amphiphilic Polymer; 이하 CCAP) 나노입자를 제조하였으며, CCAP 나노입자를 $TiO_2$ 나노입자 제조의 템플레이트로 응용하였다. 먼저 CCAP 나노입자 수용액과 티타늄 이소프로폭사이드(Titanium isopropoxide)를 혼합하여, 매우 안정한 유/무기 나노하이브리드 솔(Sol)을 제조하였으며, 제조된 솔(Sol)은 회전코팅(Spin coating) 기법을 통해 유/무기 하이브리드 박막으로 제조하고, 소결 공정을 통해서 템플레이트인 CCAP를 제거하여 제조된 $TiO_2$ 나노입자의 미세구조를 주사전자현미경(SEM)을 이용하여서 관찰하였다. 다양한 CCAP 나노입자를 템플레이트로 사용하여 제조된 $TiO_2$ 나노입자의 미세구조를 기존 유기물 템플레이트(계면활성제)를 사용하여 제조된 $TiO_2$ 나노입자의 미세구조와 비교하여, CCAP 나노입자가 $TiO_2$ 나노입자 구조에 미치는 영향을 조사하였다.

• 센서학회지
• /
• 제2권1호
• /
• pp.35-40
• /
• 1993

$Si_{3}N_{4}$ 박막의 코팅된 pH-ISFET의 게이트 부위 위에 lipase 효소를 고정화하여 FET(field effect transistor) 형지질(lipid) 센서를 제조하였다. 효소 고정화막 형성 물질로는 수용성 고분자인 polyvinyl alcohol(PVA)에 감광성기인 1-methyl-4-(formylstyryl) pyridinium methosulfate(SbQ)를 결합시킨 PVA-SbQ를 사용하였다. PVA-SbQ 수용액 (SbQ 1mole %, 10 wt%) $200{\mu}L$, bovine serum albumin (BSA) 7.5 mg, lipase 10 mg으로 구성 된 현탁액을 사용한 사진식각(photolithographic) 공정의 최적 조건은 피막의 상온 진공 건조 시간 45분, spin coater의 회전수 $5,000{\sim}6,000$ rpm, UV 노광시간 $20{\sim}30$초, 증류수 현상 시간 $30{\sim}40$초로 나타났다. 이렇게 구성된 지질 센서는 triacetin을 지질 시료로 하였을 때 $10{\sim}100$ mM의 농도 범위에서 직선성의 검정선을 나타내었다.