• 한국환경과학회지
• /
• 제7권4호
• /
• pp.541-548
• /
• 1998

Aqueous phase adsorption of phenols by granular activated carbon was studied in a batch adsorption vessel. Adsorption Isotherms of phenol(Ph), p-chlorophenol(PCP) and p-nitrophenol (PNP) from aqueous solution on granular activated carbon have been obtained. The experimental data were analyzed by the surface and pore diffusion models. Both models could be applied to predict the adsorption phenomena. However, the pore diffusion model was slightly better than the surface diffusion model In representing the experimental data for the initial concentration changes. Therefore, the pore diffusion model was used to predict the change of operating variables such as the agitation speed and Particle size of adsorbent which have influence on the film resistance and intraparticle diffusion.

• Journal of Information Display
• /
• 제13권3호
• /
• pp.107-111
• /
• 2012

An almost pure phase of $Ba_3Si_6O_{12}N_2$ doped with $Eu^{2+}$ was successfully synthesized through the ammonia nitridation of an oxide precursor prepared through an aqueous-solution method, using propylene- glycol-modified silane. The emission peak intensity of the obtained $Ba_3Si_6O_{12}N_2:Eu^{2+}$ was -2.2 times higher than that of the sample prepared through a solid-state reaction method.

• Journal of Pharmaceutical Investigation
• /
• 제39권5호
• /
• pp.353-357
• /
• 2009

As a synthetic analog of the naturally occurring hormone somatostatin, octreotide has been commercially formulated in poly(lactide-co-glycolide) (PLGA) microspheres for the treatment of acromegaly. The purpose of this study was to evaluate stability of octreotide acetate in aqueous solutions at various pH values and PLGA films. Stability-indicating reversed-phase high-performance liquid chromatographic method was developed with good precision and accuracy, and it was applied to the stability studies. In aqueous solutions at pH 2.5-9.0, the degradation of octreotide followed approximately first order kinetics and the most favorable stability was found at pH 4. In PLGA films, the formation of acylated octreotides reached approximately 55% of the released octreotides. Various acylated octreotides was structurally identified by liquid chromatography-mass spectrometric analysis.

• Bulletin of the Korean Chemical Society
• /
• 제23권7호
• /
• pp.990-994
• /
• 2002

Hydroxybenzothiophenes, dihydroxy-benzothiophenes, and benzothiophenedione were identified as inter-mediates of benzothiophene (BT) exposed to ultrasonic irradiation. It is proposed that benzothiophene is oxidized by OH radical to sequentially for m hydroxybenzothiophenes, dihydroxybenzothiophenes, and benzothiophenedione. Benzothiophene is decomposed rapidly following pseudo-first-order kinetics in a first-order manner by ultrasonic irradiation in aqueous solution. The toxicity of sonochemically treated solutions was checked by E. coli and a less inhibition in bacterial respiration was observed from the 120-min treated benzothiophene sample than from the untreated benzothiophene sample. Also evolution of carbon dioxide and sulfite was observed during ultrasonic reaction. A pathway for ultrasonic decomposition of benzothiophene in aqueous solution is proposed.

• 전기화학회지
• /
• 제5권4호
• /
• pp.216-220
• /
• 2002

The effects of electrolytes on electrochemical behavior from an oil thin layer interposed between a graphite electrode and an aqueous solution phase were examined. A hydrophobic electroactive species, tetrachloro-1,4-benzoquinone (TCQ), in a benzonitrile (EN) layer was employed to study ion transfer properties across the BN-water interface. Experimental results showed that hydrophobic cations as well as anions could be successfully used as ionic charge carriers. The addition of various salts into either the oil layers or the aqueous solutions offers deeper insight for the electrochemistry of the liquid thin layer system. When aqueous perchloric acid is interfaced with the BN films, the perchlorate ion of tetrahexylammonium perchlorate (THAP) substantially suppresses the dissociated proton concentration in the layer by the common ion effect while there is only a little change in the total acid concentration. Further approach by theoretical calculation makes it possible to quantitatively understand the effect of the electrolytes to the electrochemical responses of TCQ, which were previously reported (Anal. Chem. 73, 337 (2001)).

• 설비공학논문집
• /
• 제13권12호
• /
• pp.1275-1281
• /
• 2001

Aqueous polymer solutions are known to have small pressure reduction. Paraffin slurries are known to have high thermal capacity. Paraffin particles are mixed into an aqueous polymer solution to make a new heat transfer fluid having high thermal capacity but low pressure reduction. The heat transfer characteristics of the new slurry was tested in a circular tube having a constant heat transfer boundary condition. The new slurry was found to have high Nusselt numbers as well as high thermal capacity and low pressure reduction in the laminar flow. The trends of the Nusselt numbers along the heating test section were studied for various heating conditions.

• 전기화학회지
• /
• 제4권4호
• /
• pp.146-151
• /
• 2001

위상이동 방법을 이용하여 다결정 Ni|0.05M KOH수용액 계면에서 음극 $H_2$발생 반응을 위한 과전위 전착(흡착)된 수소의 Frumkin 흡착등온식을 연구조사 하였다. 다결정 Ni|0.05M KOH수용액 계면에서, 최적중간주파수일 때 위상이동$(0^{\circ}\leq{\phi}\leq90^{\circ})$ 거동은 표면피복율 $(1\geq{\theta}\geq0)$ 거동에 정확하게 상응한다. 최적중간주파수일 때 위상이동 변화 $(-{\phi}\;vs.\;E)$즉 위상이동 방법은 다결정 Ni|0.05M KOH수용액 계면에서 음극 $H_2$발생 반응을 위한 과전위 전착(흡착)된 수소의 Frumkin흡착등온식$(\theta\;vs.\;E)$을 추정할 수 있는 새로운 방법으로 사용될 수 있다. 다결정 Ni|0.05M KOH 수용액 계면에서, 표면피복율에 따른 과전위 전착(흡착)된 수소의 표준자유에너지 변화율(r), Frumkin 흡착등온식의 상호작용 파라미터(g), 표면피복율$(\theta)$에 따른 과전위 전착(흡착)된 수소의 흡착평형상수(K)와 표준자유에너지$({\Delta}G_{\theta})$는 각각 $24.8kJ mol^{-1},\;10,\;5.9\times10^{-6}{\leq}K{\leq}0.13,\;and\;5.1\leq{\Delta}G_{\theta}\leq29.8kJ\;mol^{-1}$이다. 전극속도론적 파라미터$(r,\;g,\;K,\;{\Delta}G_{\theta})$는 표면피복율${\theta}에 따른다.

• 전기화학회지
• /
• 제12권1호
• /
• pp.26-33
• /
• 2009

The phase-shift method and correlation constants, i.e., the unique electrochemical impedance spectroscopy (EIS) techniques for studying the linear relationship between the behavior ($-{\varphi}$ vs. E) of the phase shift ($90^{\circ}{\geq}-{\varphi}{\geq}0^{\circ}$) for the optimum intermediate frequency and that ($\theta$ vs. E) of the fractional surface coverage ($0{\leq}{\theta}{\leq}1$), have been proposed and verified to determine the Langmuir, Frumkin, and Temkin adsorption isotherms of H and related electrode kinetic and thermodynamic parameters at noble metal (alloy)/aqueous solution interfaces. At a Zr/0.2 M ${H_2}{SO_4}$ aqueous solution interface, the Frumkin and Temkin adsorption isotherms ($\theta$ vs. E), equilibrium constants (K = $1.401{\times}10^{-17}\exp(-3.5{\theta})mol^{-1}$ for the Frumkin and K = $1.401{\times}10^{-16}\exp(8.1{\theta})mol^{-1}$ for the Temkin adsorption isotherm), interaction parameters (g = 3.5 for the Frumkin and g = 8.1 for the Temkin adsorption isotherm), rates of change of the standard free energy (r = $8.7\;kJ\;mol^{-1}$ for g = 3.5 and r = $20\;kJ\;mol^{-1}$ for g = 8.1) of H with $\theta$, and standard free energies ($96.13{\leq}{\Delta}G^0_{\theta}{\leq}104.8\;kJ\;mol^{-1}$ for K = $1.401{\times}10^{-17}\exp(-3.5{\theta})mol^{-1}$ and $0{\leq}{\theta}{\leq}1$ and ($94.44<{\Delta}G^0_{\theta}<106.5\;kJ\;mol^{-1}$ for K = $1.401{\times}10^{-16}\exp(-8.1{\theta})mol^{-1}$ and $0.2<{\theta}<0.8$) of H are determined using the phase-shift method and correlation constants. At 0.2 < $\theta$ < 0.8, the Temkin adsorption isotherm correlating with the Frumkin adsorption isotherm, and vice versa, is readily determined using the correlation constants. The phase-shift method and correlation constants are probably the most accurate, useful, and effective ways to determine the adsorption isotherms of H and related electrode kinetic and thermodynamic parameters at highly corrosion-resistant metal/aqueous solution interfaces.

• 한국안전학회지
• /
• 제8권2호
• /
• pp.44-50
• /
• 1993

The objective of this study was to investigate the extraction of chromium(Vl) ion in waste water through the liquid surfactant membrane with open-type Perforated Reciprocating-Plate Column. Extraction experiments were conducted to measure the effect of flow characteristics of continuous and dispersed phase and stroke velocity, sodium hydroxide concentraction in internal aqueous phase, sulfuric acid concentraction in outer phase, and residence time distribution and measured extraction velocity. The result of experiments showed that extraction velocity of chromium ion was maximum when stroke velocity was 180 1/min and dispersion phase velocity was 30m11min, continuous phase velocity was 20m1/min. Extraction velocity of chromium ion increased with increasing difference of hydrogen ion concentraction of dispersion and continuous phase and column stage decreased.

• Macromolecular Research
• /
• 제11권3호
• /
• pp.146-151
• /
• 2003

The dependence of electrical conductivity on concentrations of diallyldimethylammonium chloride (DADMAC) monomer, linear poly(DADMAC) and their mixture monomer/poly(DADMAC) in dilute aqueous solution exhibits a linear relationship. It was possible to calculate conversion of DADMAC polymerization by measuring its electric conductivity. Although the electrical conductivity of the poly(DADMAC) solution decreased with increasing its molecular weight, in the process of UV or ionizing radiation polymerization the molecular weight of the polymers could be kept constant in the case of fixed temperature, UV-luminous intensity or dose rate. Based on the method mentioned above, the kinetics of UV induced polymerization of DADMAC in aqueous solution was studied; the overall activation energy of polymerization of DADMAC in the water phase was calculated to be 18.8 kJ mol$^{-1}$ . ${\gamma}$-Radiation-induced polymerization of DADMAC in aqueous solution as a function of absorbed dose was studied as well. The conversion of DADMAC increased quickly with dose before 30 kGy and then increased slowly. The experimental data of both UV- and ${\gamma}$-induced polymerization were verified to be reliable by inverted ultracentrifugation method.