• 제목/요약/키워드: Appropriate technology

검색결과 5,542건 처리시간 0.046초

해외 주요국 벤처육성 모델의 국내 적용 적합성에 관한 연구 (A study on appropriate venture promotion model to korea among major foreign countries' venture policy)

  • 안종배
    • 문화기술의 융합
    • /
    • 제6권1호
    • /
    • pp.121-133
    • /
    • 2020
  • 본 연구에서는 최근 가장 성공적인 벤처육성 사례를 보이고 있는 미국, 이스라엘, 독일, 핀란드, 중국의 벤처육성 정책을 살펴보고 이들 중 국내 벤처 발전을 위해 유용한 모델, 적용이 용이한 모델, 적용에 적합한 모델, 그리고 국내 적용이 적합한 이유와 부적합한 이유를 파악하고 이를 통해 국내 벤처육성과 발전을 위한 정책적 시사점을 도출하려 하였다. 연구방법은 '전문가 합의법'이라 불리는 델파이 조사 기법을 활용하여 50명의 벤처전문가 패널을 대상으로 연구를 실시하였다. 델파이 조사 연구결과 핀란드의 벤처육성 정책이 유용성, 용이성, 적합성에서 가장 높은 평가를 얻었다. 핀란드처럼 민,관,산,학,연이 유기적인 활동을 통한 벤처생태계를 구축하는 것이 국내 벤처 정책에 최우선적으로 필요한 것으로 분석되었다. 또한 예전의 한국에서 실시한 정부 주도하에 민간이 따라오는 벤처 육성 정책은 더 이상 적합하지 않는 것으로 분석되었다.

정수시설 설계에 대한 어포던스 이론 적용 연구: 베트남 빈딘 사례를 중심으로 (Applying the Theory of Affordance to the Design of Water Purification Facilities : Focusing on the Case of Binh Dinh in Vietnam)

  • 박혜린;황여경;김슬기;이준민;황준석
    • 적정기술학회지
    • /
    • 제6권1호
    • /
    • pp.28-36
    • /
    • 2020
  • 지속가능한 적정기술은 대상 지역의 정치적, 문화적, 환경적 측면에 대한 고려와 함께 사용자 중심 설계가 요구된다. 하지만 적정기술 준비과정에서 보급 이후 실제 사용자 행위를 결정하는 사용자 의도와 경험에 대한 사전 파악에 한계가 있다. 그 결과, 해당 기술이 설계자의 의도와는 다르게 사용되거나 불편한 경우가 많다. 본 연구는 적정기술 사례를 마이어의 어포던스 이론을 반영한 분석틀로 분석하고, 디자인 측면의 개선책을 제시하고자 한다. 어포던스 이론은 사용자가 사물에 대해 사전 지식과 경험에 근거한 해석을 통해 그 특징을 파악하고 사용하도록 하는 요인에 대한 이론이다. 이 연구에서 분석 사례는 2015년 8월부터 2018년 1월까지 베트남 빈딘성에 설치된 6개의 학교 중 3개 학교의 정수시설 설계자 인터뷰, 관리교육자료, 관리자 인터뷰 내용이다. 해당 사례는 주기적인 설치, 관리, 점검으로 개선하려 했지만 유사한 문제가 지속적으로 발생한 사례로, 본 연구의 분석대상으로 적합하다고 판단되었다. 우선, 시설 점검 및 관리자 인터뷰 내용을 설치 당시 배부한 관리자 교육자료와의 비교를 통해 불일치하는 시설을 발견한다. 다음으로, 설계자가 의도한 어포던스와 실제로 관리 행위에 영향을 준 어포던스를 분석한 뒤 문제가 발생한 3개 사례에서 도출된 공통적인 어포던스를 바탕으로 설계 보완책을 제시한다. 이를 통해 적정기술의 보급 전 사용자의 행위를 고려한 디자인의 적용이 필요함을 시사하고, 기존의 문제가 발생한 기술에 대해 어포던스를 바탕으로 한 분석틀을 통해 개선책을 찾는 과정에서 본 연구가 선례가 될 수 있을 것이라 사료된다.

옹기 필터를 이용한 무 전원 정수 장치에 관한 연구 (Characteristics of the Non-electric Water Purification System Using Onggi Filter)

  • 위인희;신동욱;한규성;김진호;조우석;황광택
    • 한국세라믹학회지
    • /
    • 제51권4호
    • /
    • pp.332-336
    • /
    • 2014
  • A non-electric water purification system using the Korean traditional ceramic ware Onggi, was demonstrated as an appropriate technology to solve water shortages in under developed regions. Generally, Onggi is produced using large size raw materials that are sintered at low temperature, resulting in a porous body that shows air and water permeability. An Onggi filter was prepared using a spinning wheel with the addition of rice bran to the body to increase porosity. The porosity of the obtained Onggi filter was 25.1%; the water permeability was 85.1 $L/m^2h$. Turbidity and TDS of the purified water using Onggi filter were decreased by 97.7% and 29.1%, respectively.

Effect of Stress on Current-Voltage Characteristics of ZnO Based Ceramics

  • Jung Ju-Yong;Kim Yeong-Cheol;Seo Hwa-Il;Chung Dong-Teak;Kim Young-Jung;Min Joon-Won
    • 반도체디스플레이기술학회지
    • /
    • 제4권4호
    • /
    • pp.1-4
    • /
    • 2005
  • The chemical composition and uniaxial compressive stress are varied to observe their effect on the current-voltage characteristics of ZnO based ceramics. The variation of chemical composition produces two kinds of ceramics showing ohmic and nonohmic current-voltage characteristics. The current at a fixed voltage increased with the increase of the compressive stress for both ohmic and nonohmic ceramics. Ceramics showing nonohmic behavior exhibit better reversible return of current-voltage curve when the applied compressive stress is removed from the ceramics than those showing ohmic behavior do. We found an appropriate chemical composition showing linear relation between current and stress at a fixed voltage. The ceramic materials with an appropriate chemical composition can be used as a potential sensing material in pressure sensors.

  • PDF

제품설계와 환경 (Product Design and Environment)

  • 홍순성
    • 청정기술
    • /
    • 제6권1호
    • /
    • pp.1-6
    • /
    • 2000
  • 현재 우리나라에서는 제품 설계 단계에서, 기능 설계와 제품의 생산 문제를 동시에 해결하려는 concurrent engineering이 발전되고 있고, 여기에 추가하여 environment의 영향을 고려한 concurrent 설계의 개발이 필요한 시기가 되었다. 청정 기술이 제품 설계단계에서 활용될 수 있는 예를 제시한다. 또한 design engineer가 환경문제를 해결하게 하기 위하여는, 기초기능 specification 단계부터, 제품별 환경 spec과 같은 data base가 PC에서 쉽게 점할 수 있도록 청정기술자의 도움이 필요하다.

  • PDF

Mesh Simplification and Adaptive LOD for Finite Element Mesh Generation

  • Date, Hiroaki;Kanai, Satoshi;Kishinami, Takeshi;Nishigaki, Ichiro
    • International Journal of CAD/CAM
    • /
    • 제6권1호
    • /
    • pp.73-79
    • /
    • 2006
  • In this paper, we propose a new triangular finite element mesh generation method based on simplification of high-density mesh and adaptive Level-of-Detail (LOD) methods for efficient CAE. In our method, mesh simplification is used to control the mesh properties required for FE mesh, such as the number of triangular elements, element shape quality and size while keeping the specified approximation tolerance. Adaptive LOD methods based on vertex hierarchy according to curvature and region of interest, and global LOD method preserving density distributions are also proposed in order to construct a mesh more appropriate for CAE purpose. These methods enable efficient generation of FE meshes with properties appropriate for analysis purpose from a high-density mesh. Finally, the effectiveness of our approach is shown through evaluations of the FE meshes for practical use.

DEVELOPMENT OF DIGITAL ASSEMBLY CELL FOR LASER WELDING OF SIDE PANELS

  • Park, H.S.;Lee, H.B.
    • International Journal of Automotive Technology
    • /
    • 제7권6호
    • /
    • pp.721-728
    • /
    • 2006
  • This paper is concerned with development of digital assembly cell. Automotive industries, try to find out new welding technologies to replace the existing spot welding which is not appropriate anymore. Because of many advantages like good accessibility, welding quality and fast welding speed, laser welding seems the most appropriate solution for automobile manufactures. To apply this technology to welding of car body, experiments must be conducted according to material, geometry and layer in welding area. Based on the data of these experiments, the laser welding process and the quality of stitches are identified. And then, the comparison between the requirements of welding and the potential of equipments allows selecting the best equipments. By using the digital manufacturing, the configurations of laser welding cell are carried out. After all, the optimal laser welding cell is chosen by the evaluation of alternative cells with technical and organizational criteria.

Band Structure Engineering of Monolayer MoS2 by Surface Ligand Functionalization

  • Lee, Sang Yoon;Ramzan, Sufyan
    • EDISON SW 활용 경진대회 논문집
    • /
    • 제4회(2015년)
    • /
    • pp.367-370
    • /
    • 2015
  • Monolayer transition metal dicalcogenide (TMDC) materials are currently attracting extensive attention due to their distinctive electronic, transport, and optical properties. For example, monolayer $MoS_2$ exhibits a direct band gap in the visible frequency range, which makes it an attractive candidate for the photocatalytic water splitting. For the photoelectrochemical water splitting, the appropriate band edge positions that overlap with the water redox potential are necessary. Similarly, appropriate band level alignments will be crucial for the light emitting diode and photovoltaic applications utlizing heterojunctions between two TMDC materials. Carrying out first-principles calculations, we here investigate how the band edges of $MoS_2$ can be adjusted by surface ligand functionalization. This study will provide useful information for the realization of ligand-based band engineering of monolayer $MoS_2$ for various electronic, energy, and bio device applications.

  • PDF

Efficient Slice Allocation Method using Cluster Technology in Fifth-Generation Core Networks

  • Park, Sang-Myeon;Mun, Young-Song
    • Journal of information and communication convergence engineering
    • /
    • 제17권3호
    • /
    • pp.185-190
    • /
    • 2019
  • The explosive growth of data traffic and services has created cost challenges for networks. Studies have attempted to effectively apply network slicing in fifth generation networks to provide high speed, low latency, and various compatible services. However, in network slicing using mixed-integer linear programming, the operation count increases exponentially with the number of physical servers and virtual network functions (VNFs) to be allocated. Therefore, we propose an efficient slice allocation method based on cluster technology, comprising the following three steps: i) clustering physical servers; ii) selecting an appropriate cluster to allocate a VNF; iii) selecting an appropriate physical server for VNF allocation. Solver runtimes of the existing and proposed methods are compared, under similar settings, with respect to intra-slice isolation. The results show that solver runtime decreases, by approximately 30% on average, with an increase in the number of physical servers within the cluster in the presence of intra-slice isolation.

A Verified Formal Specification of A Secured Communication Method For Smart Card Applications

  • Kim, Donald D.
    • 적정기술학회지
    • /
    • 제7권2호
    • /
    • pp.172-187
    • /
    • 2021
  • In remote villages without access to modern IT technology, simple devices such as smartcards can be used to carry out business transactions. These devices typically store multiple business applications from multiple vendors. Although devices must prevent malicious or accidental security breaches among the applications, a secure communication channel between two applications from different vendors is often required. In this paper, first, we propose a method of establishing secure communication channels between applications in embedded operating systems that run on multi-applet smart cards. Second, we enforce the high assurance using an intransitive noninterference security policy. Thirdly, we formalize the method through the Z language and create the formal specification of the proposed secure system. Finally, we verify its correctness using Rushby's unwinding theorem.