• Journal of Periodontal and Implant Science
• /
• 제48권3호
• /
• pp.152-163
• /
• 2018

Purpose: To determine whether the swelling and mechanical properties of osmotic self-inflating expanders allow or not the induction of intraoral soft tissue expansion in dogs. Methods: Three different volumes (0.15, 0.25, and 0.42 mL; referred to respectively as the S, M, and L groups) of soft tissue expanders (STEs) consisting of a hydrogel core coated with a silicone-perforated membrane were investigated in vitro to assess their swelling behavior (volume swelling ratio) and mechanical properties (tensile strength, tensile strain). For in vivo investigations, the STEs were subperiosteally inserted for 4 weeks in dogs (n=5). Soft tissue expansion was clinically monitored. Histological analyses included the examination of alveolar bone underneath the expanders and thickness measurements of the surrounding fibrous capsule. Results: The volume swelling ratio of all STEs did not exceed 5.2. In tensile mode, the highest mean strain was registered for the L group ($98.03{\pm}0.3g/cm$), whereas the lowest mean value was obtained in the S group ($81.3{\pm}0.1g/cm$), which was a statistically significant difference (P<0.05). In addition, the S and L groups were significantly different in terms of tensile strength ($1.5{\pm}0.1g/cm$ for the S group and $2.2{\pm}0.1g/cm$ for the L group, P<0.05). Clinical monitoring showed successful dilatation of the soft tissues without signs of inflammation up to 28 days. The STEs remained volumetrically stable, with a mean diameter in vivo of 6.98 mm, close to the in vitro post-expansion findings (6.69 mm). Significant histological effects included highly vascularized collagen-rich fibrous encapsulation of the STEs, with a mean thickness of $0.67{\pm}0.12mm$. The bone reaction consisted of resorption underneath the STEs, while apposition was observed at their edges. Conclusions: The swelling and mechanical properties of the STEs enabled clinically successful soft tissue expansion. A tissue reaction consisting of fibrous capsule formation and bone loss were the main histological events.

• 대한치과보철학회지
• /
• 제32권1호
• /
• pp.148-169
• /
• 1994

The concept of biologic attachment of load-bearing implants has developed over the past decades as an alternative to the difficulties associated with long term implantation using mechanical fixation and bone cement. The choice of implant material is also as critical an element as site preparation or insertion procedure. The properties of implants that affect host tissue responses are not limited to chemical composition alone, but also include shape, surface characteristics, site of implantation, and mechanical interaction with host tissues. Initial mechanical interlocking prevents micromotion and may be a prerequisite for direct bone apposition. A hard tightening of screws does not necessarily mean a stronger fixation and final tightening of the fixtures is dependent on the experience of the operator. Removal torque is lower than insertion torque. The purpose of this study was to investigate differences in the removal torques at the bone-implant interface of polished and sandblasted Titanium. This experiment will give insight into important factors that must be considered when interpreting in vivo screwing forces on implants during the connection of the transmucosal abutments. We evaluated the significance of different surface textures by comparison of the withdrawal forces necessary for removal of otherwise identical rough and polished implants of Titanium and also evaluated interfacial response on the light microscopic level to implant surface. And the priority of the area of insertion on osseointegration were evaluated. 9 Titanium implants - among them, 3 were for the developmental - of either a smooth or rough surface finish were inserted in the dog mandible in the right side. 3 months later Kanon Torque Gauge was used to unscrew the implants. The results were as follows : 1. No significant difference was seen in the removal torque due to variation in surface treatment, 23 Ncm for the sandblasted and 23.33 Ncm for the polished surface (p>0.05). 2. Implants in the anterior (25 Ncm) mandible showed better resistance to unscrewing in comparison to ones in the posterior (18 Ncm) region (p<0.05). 3. Developmental fixtures (22 Ncm) had similar pullout strength to the control group (p>0.05).

• 한국응용곤충학회지
• /
• 제34권3호
• /
• pp.266-277
• /
• 1995

벼멸구는 촉각 기부의 등쪽으로 알모양의 24ㅐ의 겹눈을 가지고 있다. 벼멸구의 겹눈은 각각의 단안이 분리되어 있고, 각각의 낱눈이 단지 그들의 각막렌즈를 통해서만이 빛을 받는 연립상 겹눈이다. 각각의 낱눈은 큐티클성 각막렌즈와 그 안쪽에 수정체가 자리잡고 있다. 망막세포는 수정체 바로 아래쪽에 자리하며, 이들은 중심축쪽으로 감간소체들이 밀집결합되어 감간체를 형성한다. 감간체는 수정체 말단부분에서 시작되어 기저막에 까지 다달으며, 그 길이는 약 110~120${\mu}m$ 정도이다. 수정체는 4개로 구성된 한쌍의 1차색소세포에 의하여 둘러 쌓여 있으며 이것은 또한 부속색소세포에 의하여 둘러 쌓여 있다. 수정체의 기저부위는 망막세포에 의하여 일부가 둘러 쌓여 있고 망막세포의 내벽에서 발생한 감간소체들로 구성된 감간체와 닿아있다. 낱눈의 상층부분은 7개의 망막세포로 구성되어 있으나 3/4부분에서 8번째의 망막세포가 자리잡고 있다. 중앙부위에 위치하고 있는 감간체는 미세용 모들로 구성된 감간소체들로 구성되어 있는데, 이들 미세융모의 단면도는 6각형의 모양을 가지고 있다. 색소세포는 수정체를 감싸고 있는 1차색소세포, 기저막까지 닿아 있는 부속색소세포, 기저막 부위의 기저막색소세포 등 3가지의 색소세포들이 있다.

• 대한치과교정학회지
• /
• 제30권6호
• /
• pp.669-675
• /
• 2000

부갑상선 호르몬이 과도하게 분비되는 경우 전반적인 골의 탈석회화에 의해 골막성 골흡수 및 골의 동통 등의 증상이 발현될 수 있다. 본고에서 소개된 환자의 경우 광범위한 치근 흡수를 동반한 부정 교합 환자로, 임상 및 두부 방사선 계측사진 분석에서 상악 열성장과 하악 과성장이 동반된 골격성 III급 부정 교합으로 진단되 었으며, 병리검사결과 부갑상선 호르몬 및 성장 호르몬의 수치가 증가된 것으로 보아 부갑상선 기능항진증으로 판단되었다. 방사선 사진 분석 결과 광범위한 치근의 흡수를 관찰할 수 있었으며 골다공증과 유사하게 골소주 형태가 매우 성기면서 ground glass 양상을 보였다. 이와 같이 부갑상선 기능항진증에 의해 골질뿐만 아니라 치근이 영향을 받은 것은 매우 드문 경우로 생각된다. 또한 부갑상선 기능항진증에 의해 내장두개의 골침착이 감소될 수 있다는 동물실험 결과를 볼 때 III급 부정교합의 원인이 상악 열성장인 점과 연관하여 매우 흥미로운 점으로 지적된다. 따라서 부갑상선 기능항진증의 다양한 증상 및 양태에 대한 조기진단 및 이에 대한 지식은 교정진단 및 치료에 중요한 역할을 할 수 있다고 생각된다.

• Archives of Reconstructive Microsurgery
• /
• 제3권1호
• /
• pp.45-53
• /
• 1994

Suture microvascular anastomosis is time-consuming and tedious and demands long and continuous training. Techinique of anastomosis of microvessel was presented interrupted suture and continuous suture. Recently the unilink instrument system is created as a fast and simple method to achieve high patency rates without long and continuous training in the anastomosis of small vessels. The author experimentally studied the femoral artery of 20 mice(0.5-1.0mm, av. 0.7mm), the femoral vein of 20 mice(0.8-1.6mm, av. 1.2mm) after anastomosis with interrupted suture in 20 cases and continuous sutre in 20 cases. For the unilink apparatus we used the carotid arteries of 15 cases in 14 rabbits(1.0-1.6mm, av. 1.3mm) and facial veins of 12 cases in 14 rabbits(0.9mm-2.2mm, av. 1.5mm). A total of 27 arterial and venous anastomoses were performed. We examined the postoperative patency at immediate, 2 weeks, and 8 weeks. The results were as followings, 1. In the arterial anastomosis the rate of patency was 90%(18/20) in interrupted suture, 90%(18/20) in continuous suture and 93%(13/15) in unilink apparatus. In the venous anastomosis the rate of patency was 90%(18/20) in interrupted suture, 80%(16/20) in continuous suture and 100%(9/9) in unilink apparatus. 2. The mean time for completion of the arterial anastomosis were 12.2 minutes in interrupted suture group, 10.3 minutes in continouous suture group and 8.5 minutes in unillnk apparatus group. The mean time for completion of the venous anastomosis were 13.6 minutes in interrupted suture group, 11.0 minutes in continuous suture group and 6.2 minutes in unilink apparatus group. 3. At the histological examination of suture group, hyperplastic reaction of middle layer and subintimal hyperplasia were observed. In unilink apparatus group, the endothelium layer was continued and the thickness of vessel wall was decreased due to moderate atrophy of the media and mild degree of nonspecific chronic inflammation were seen around the unilink apparatus. 4. No significants was noticied in foreign body reaction among the interrupted, continuous and unilink apparatus group. 5. A case of the arterial anastomosis was released with acting out at 15 minutes after operation. 6. The important factors in the technical problems were accurate apposition of the cut vessel edges in suture group and the proper selection of the ring size and optimal fitting between two rings in unilink apparatus group. Even though the outer diamater of vessel in suture group was different from that in unilink apparatus group the unilink method provides a very safe, fast, and simple way to perform microvascular anastomoses especially in anastomosis of vein. But howerver suture was needed in vessels below 1 mm outer diamater. In that situation continuous suture was benefit than the interrupted suture in operation time.

• Journal of Pharmaceutical Investigation
• /
• 제31권4호
• /
• pp.241-256
• /
• 2001

Alginate microspheres, containing fluorescein isothiocyanate-bovine serum albumin (FITC-BSA) or green fluorescent protein (GFP) were prepared and used as a model drug to develop the oral vaccine delivery system. The alginate microspheres were coated with poly-L-lysine or chitosan. Two methods, w/o-emulsion and spray, were used to prepare alginate microspheres. To optimize preparation conditions, effects of several factors on the particle size and particle morphology of microsphere, and loading efficiency of model antigen were investigated. In both preparation methods, the particle size and the loading efficiency were enhanced when the concentration of sodium alginate increased. In the w/o-emulsion preparation method, as the concentration of Span 80 was increased from 0.5% to 2%, the particle size was decreased, but the loading efficiency was increased. The higher the emulsification speed was, the smaller the particle size and loading efficiency were. The concentration of calcium chloride did not show any effect on the particle size and loading efficiency. In the spray preparation method, the particle size was increased as the nozzle pressure $(from\;1\;kgf/m^2\;to\;3\;kgf/m^2)$ and spray rate was raised. Increasing calcium chloride concentration (<7%) decreased the particle size, in contrast to no effect of calcium chloride concentration on the w/o-emulsion preparation method. Alginate microspheres prepared by two methods were different in the particle size and loading efficiency, the particle size of microspheres prepared by the spray method was about $2-6\;{\mu}m$, larger than that prepared by the w/o emulsion method $(about\;2{\mu}m)$, and the loading efficiency was also higher with spray method. Furthermore, drying process for the microspheres prepared by the spray was simpler and easier, compared with the w/o emulsion preparation. Therefore, the spray method was chosen to prepare alginate microspheres for further experiments. Release pattern of FITC-BSA in alginate microspheres was evaluated in simulated intestinal fluid and PBS (phosphate buffered saline). Dissolution rate of FITC-BSA from alginate/chitosan microsphere was lower than that from alginate microsphere and alginate/poly-L-lysine microsphere. By confocal laser scanning microscope, it was revealed that alginate/FITC-poly-L-lysine microspheres were present in close apposition epithelium of the Peyer's patches of rabbits following inoculation into lumen of intestine, which proved that microspheres could be taken up by Peyer's patch. In conclusion, it is suggested that alginate microsphere prepared by spray method, showing a particle size of & $10\;{\mu}m$ and a high loading efficiency, can be used as a model drug for the development of oral vaccine delivery system.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권1호
• /
• pp.46-54
• /
• 2005

Purpose: This study was performed in order to compare the osseointegration of 4 different surfaced implants in the dog's tibia which has thick dense cortical bone and loose marrow space. Materials & methods: Four mongrel dogs and four different surface types of implants, smooth surfaced AVANA implants, RBM surfaced AVANA implants, HA-coated Steri-Oss implants and SLA Bicon implants, were used in this study. The animals were divided into 4 groups on the basis of implant surface characteristics: Control group, RBM group, HA group, and SLA group. Three implants of each group were installed into the metaphysis of tibia of adult dogs. The animals were sacrificed at 8 weeks after implantation. The undecalcified specimens were prepared for histological examination and histomorphometric analysis of implant-bone contact ratios. Results: Radiographically and histologically good osseointegration of implant was observed in the dense cortical bone, but poor osseointegration was observed in the marrow space. Histologically more bone apposition to implant surface was found in rough surfaced groups than the smooth surfaced, Control group. In histomorphometric findings of cortical bone the average bone-implant contact ratios of HA group (95.4%, p<0.01), RBM group (87.1%, p<0.05), and SLA group (86.0%, p<0.05) were significantly higher than that of Control group (75.9%). In marrow space the average bone-implant contact ratios of HA group (76.1%, p<0.01) and SLA group (45.4%, p<0.05) were significantly higher than that of Control group (29.6%). The ratio of RBM group was higher than that of Control group but there was no significantly difference between RBM group and Control group. Conclusion: These results suggest that the rough surfaced implants can obtain the better osseointegration than the smooth surfaced implant in the cortical and marrow space and that HA-coated implants can obtain the best osseointegration in the marrow space among them.

• 대한소아치과학회지
• /
• 제26권4호
• /
• pp.616-622
• /
• 1999

치수치료의 주요한 목적은 구강조직의 본래의 건강을 유지하는 것이며, 치수치료 시 가장 중요하고 어려운 점은 치수조직의 건강상태 또는 염증의 정도를 결정함으로써 최선의 치료방법을 결정하는 것이다. 미성숙 영구치는 풍부한 혈류 공급으로 다양한 손상에 성공적으로 반응하게끔 치수의 능력을 향상시킴으로써 많은 치수치료 술식을 위한 좋은 조건을 가지고 있다. 기저재(base) 또는 이장재(liner), 간접 치수복조술, 직접 치수복조술, 그리고 치경부 치수절단술을 포함한 여러 종류의 보존적인 치수치료가 미성숙 영구치를 위해 추천되어 왔다. 근래에는 외상으로 인하여 치수노출된 영구절치를 치료하는데 있어 주로 제시된 부분 치수절단술(partial pulpotomy)이 우식으로 인해 치수노출된 영구대구치를 치료하는 또 다른 술식으로 제안되고 있다. 부분 치수절단술 후 치아가 다음의 criteria를 만족시킬 때 치유가 되었다고 결론지었다. 1. 임상적 무증상 2. dentin bridge 형성의 방사선학적 증거 3. 방사선상에 치수내 또는 치근단 병소가 없다는 증거 4. 지속적인 치근 발육과 미성숙 치아의 치근첨 형성 5. 성숙된 치아에서 정상적인 상아질의 축적 6. 전기치수검사에서 양성 반응 이에 저자는 미성숙 영구치에서 우식 또는 외상으로 인한 치수노출시 부분 치수절단술을 행하여 양호한 결과를 얻었기에 이를 보고하는 바이다.

• Clinical and Experimental Reproductive Medicine
• /
• 제26권2호
• /
• pp.193-201
• /
• 1999

본 연구에서는 소 난자 세포질내 원형정자 및 원형정자 핵을 미세주입 후 수정과정과 체외 배 발달을 조사하였다. 원형정자 주입 3시간 전에 인위적 자극을 주고 원형정자를 주입했을 때 난자들의 수정률이 주입 직후에 자극을 준 것들과 자극을 주지 않은 것들 보다 높았다. 원형정자 주입과 원형 정자핵을 주입한 후 전핵 형성률과 전핵 이동률을 조사하였으나 유의차를 발견할 수 없었다. 전핵의 형성과 이동중에 미세소관의 움직임을 간접형광면역법 및 공촛점 현미경을 사용하여 조사해 본 결과, 난활성 직후 난자의 표층에서 미세소관이 발생해서 이것에 의해 웅성 및 자성전핵이 난자 중심부로 이전됨을 볼 수 있었다. 수정 후 원형정자의 세포질내 Mitochondria의 분포상태를 알아보기 위해 MitoTracker에 노출시킨 원형정자를 주입한 후 형광현미경에서 관찰해 보았다. 그 결과 원형정자의 Mitochondria가 주입 후 4-cell 이 전까지 는 관찰되었으나 그 이 후에는 발견 할 수 없었다. 원형정자를 미세주입한 후 소 난자를 체외에서 배양했을 때 2.5%의 난자가 배반포로 발달하였다. 이상의 결과는 체외 배양한 소 난자 내에 원형정자 혹은 원형정자 핵을 미세 주입하여 정상적인 수정과 배발달이 가능한 것을 보여 주는 것이다.

• Journal of Periodontal and Implant Science
• /
• 제31권3호
• /
• pp.555-564
• /
• 2001

The purpose of this study is to evaluate the bioresorbability of Calcium Polyphosphate added with $Na_2O$ and chitosan. Though calcium phosphate ceramics meet some of the needs for bone replacement, they have some limitation of unresorbability and fibrous encapsulation without direct bone apposition during bone remodelling. To solve these problem, we developed a new ceramic, calcium polyphosphate(CPP), and report the biologic response to CPP in extraction sites of beagle dog. Porous CPP granules were prepared by condensation of anhydrous $Ca(H_2PO_4)_2$ to form non-crystalline $Ca(PO_3)_2$. CPP granules added with $Na_2O$ and chitosan were implanted in extraction sockets and histologic observation were performed at 12 weeks later. Histologic observation at 12 weeks revealed that CPP matrix were mingled with and directly apposed to new bone without any intervention of fibrous connective tissue. CPP granules added with chitosan were well adatped without any adverse tissue reaction and resorbed slowly and spontaneously. CPP granules added with $Na_2O$ and chitosan show multinucleated giant cells and osteoblast-like cells around grafted material and newly formed bone. This result revealed that CPP, regardless of its additive component, had a high affinity for bone and had been resorbed slowly. From this results, it was suggested that CPP is promising ceramic as a bone substitute and addition of $Na_2O$ and chitosan help biodegradation. In further study , it will be determined which concentration of $Na_2O$ help biodegradation and the other additive components increase the degradation rate.