• 한국토양비료학회지
• /
• 제15권2호
• /
• pp.117-127
• /
• 1982

시용질소(施用窒素)의 형태(形態)가 뽕잎생산량(生産量), 질소(窒素)의 회수량(回收量) 엽중(葉中)의 각종(各種) 이온의 엽위별(葉位別) 분포(分布) 및 균형(均衡), 경시적(経時的)인 변동(変動)에 미치는 영향을 알고져 유안(硫安), 요소(尿素), $NH_4NO_3$($NO_3:NH_4$=1:1), $NaNO_3+NH_4NO_3$($NO_3:NH_4$=2:1). $NaNO_3$등 5개처리를 하여 폿트시험(試験)으로 수행(遂行)하였는 바 그 결과(結果)는 다음과 같다. 1. 유안구(硫安区)를 대조(対照)로 한 수엽량지수(收葉量指数)는 요소구(尿素区)와 1:1구(区)에서 75, 2:1구(区)에서 69, $NaNO_3$구(区)에서 67로 $NO_3$시용비율(施用比率)이 높을수록 낮았다. 2. 유안구(硫安区)를 대조(対照)로 한 질소(窒素)의 회수량지수(回收量指数)는 요소구(尿素区)에서 88, 1:1구(区)에서 78, 2:1구(区)에서 74, $NaNO_3$구(区)에서 59이었다. 3. 생육초기(生育初期)에 뽕잎중의 양(陽)이온함량(含量)은 Na$H_2PO_4$함량(含量)이 전생육기간(全生育期間)을 통(通)해 타(他) 음(陰)이온보다 높았으며, 초기(初期)에는 $SO_4<NO_3<Cl$ 이었으나 후기(後期)에는 $NO_3$와 Cl는 감소(減少)하고 $SO_4$는 증가(増加)하여 $NO_3<Cl<SO_4$의 순서로 높았다. 4. 엽위별(葉位別)로 K, $H_2PO_4$, $SO_4$, $NO_3$, 전질소(全窒素), ${\sum}A$ 등은 상위엽(上位葉)에, Ca, Mg, Cl, ${\sum}C$, (C-A)등을 하위엽(下位葉)에 높았다. 5. $NO_3$의 흡수(吸收)가 줄게되자 Cl가 K을 동반(同伴)이온으로 하여 흡수가 증가(増加)되었으며, Ca은 K의 흡수증가에 의해 흡수(吸收)가 감소(減少)되었다. 6. 뽕잎중의 ${\sum}C$는 1,100~1,200, ${\sum}A$는 300~350, (C-A)는 700~900me/kgDM사이에 분포하였으며, (C-A)는 엽위별(葉位別), 경시적(経時的)으로 변동(変動)을 보였다.

• 한국세라믹학회지
• /
• 제42권6호
• /
• pp.384-390
• /
• 2005

[ ${\alpha}-Al_2O_3$ ] precursor was synthesised by sol-gel method using aluminum sulfate, sodium sulfate and sodium carbonate as law materials. The flaky ${\alpha}-Al_2O_3$ crystals were prepared by heating using precursor about $1,050^{\circ}C$. In this study, the effect of some transition-metal sulfate ($FeSO_4,\;SnSO_4,\;ZnSO_4$) addition have been investigated. When iron sulfate was added, it could see that act on impurities in crystal growth process. In case of tin sulfate, distribution of Platelets was very broad. When flaky ${\alpha}-Al_2O_3$ crystals were prepared zinc sulfate addition, thickness, size, and distribution of platelets was suited to industrial application. The average diameter of flaky ${\alpha}-Al_2O_3$ crystals was about 20 $\mu$m, and its thickness was about 0.3 $\mu$m. Increasing addition of zinc sulfate, thickness of ${\alpha}-Al_2O_3$ platelet was decreased.

• 대한치과보철학회지
• /
• 제40권4호
• /
• pp.335-343
• /
• 2002

This study investigated the effect of temporary cement and desensitizer on the bond strength of luting cements. Total 96 dentin specimens were divided into two groups with and without temporary cementation. For temporary cement-tread group, specimens were cemented with $Temp-bond^{(R)}$ and all specimens were stored in distilled water at $37^{\circ}C$ for 7 days. Each cup was further divided into 3 subgroups with $Gluma^{(R)},\;One-step^{(R)}$ application and without desensitizer After desensitizer application, Ni-Cr specimens were luted to dentin surface with $Panavia-F^{(R)}$ and $Vitremer^{(R)}$ Specimens were placed in distilled water at $37^{\circ}C$ for 24 hours and shear bond strength between metal and dentin was measured by a universal testing machine. The results were as follows : 1. In $Panavia-F^{(R)}$ cemented groups, the combination of $One-step^{(R)}$ without temporary cement showed the greatest strength. Among the desensitizer types, $One-step^{(R)}$ showed the highest bond strength, followed by No-desensitizer, $Gluma^{(R)}$. 2. In $Vitremer^{(R)}$ cemented groups, the combination of no temporary cement and without desensitizer showed the greatest bond strength. Among the desensitizer types, No-desensitizer group showed the highest bond strength. 3. The use of $Gluma^{(R)}$ significantly reduced the shear bond strength in $Panavia-F^{(R)}$ and $Vitremer^{(R)}$ groups. 4. All temporary cement-treated groups showed a significant lower shear bond strength than without temporary cement groups. 5. Desensitizer application significantly influenced the bond strength of the resin cement and resin modified glass ionomer cement.

• Biomolecules & Therapeutics
• /
• 제24권1호
• /
• pp.85-93
• /
• 2016

We already reported that genetically engineered resveratrol-enriched rice (RR) showed to down-regulate skin melanogenesis. To be developed to increase the bioactivity of RR using calli from plants, RR was adopted for mass production using plant tissue culture technologies. In addition, high-pressure homogenization (HPH) was used to increase the biocompatibility and penetration of the calli from RR into the skin. We aimed to develop anti-melanogenic agents incorporating calli of RR (cRR) and nanoparticles by high-pressure homogenization, examining the synergistic effects on the inhibition of UVB-induced hyperpigmentation. Depigmentation was observed following topical application of micro-cRR, nano-calli of normal rice (cNR), and nano-cRR to ultraviolet B (UVB)-stimulated hyperpigmented guinea pig dorsal skin. Colorimetric analysis, tyrosinase immunostaining, and Fontana-Masson staining for UVB-promoted melanin were performed. Nano-cRR inhibited changes in the melanin color index caused by UVB-promoted hyperpigmentation, and demonstrated stronger anti-melanogenic potential than micro-cRR. In epidermal skin, nano-cRR repressed UVB-promoted melanin granules, thereby suppressing hyperpigmentation. The UVB-enhanced, highly expressed tyrosinase in the basal layer of the epidermis was inhibited by nano-cRR more prominently than by micro-cRR and nano-cNR. The anti-melanogenic potency of nano-cRR also depended on pH and particle size. Nano-cRR shows promising potential to regulate skin pigmentation following UVB exposure.

• 콘크리트학회논문집
• /
• 제16권3호
• /
• pp.369-374
• /
• 2004

$C_4A_3S$ 합성은 천연원료인 석회석과 산업폐기물 및 부산물인 수산화알루미늄, 이수석고를 일정혼합비로 균일하게 혼합하여 20, 400, 600, $1200^{\circ}C$에서 1시간 소성 후 급냉하여 $C_4A_3S$ 클링커를 합성하였다. 합성한 클링커를 보통 포틀랜드 시멘트에 10 wt%치환하여 수중 양생하에서 수화반응 및 물성특성을 조사하였다. $1200^{\circ}C$에서 $C_4A_3S$ 클링커가 합성됨을 X-Ray diffraction pattern으로 관찰할 수 있었다 $1200^{\circ}C$에서 소성된 시료는 급결성을 띠었으며, 압축강도는 보통 포틀랜드 시멘트보다 20~30% 정도 높게 나타났다. 주요 수화생성물은 ettringite, 수산화 칼슘이며, ettringite의 팽창으로 인하여 모르타르의 건조수축이 보통 포틀랜드 시멘트보다는 낮게 나타났다.

• 대한화학회지
• /
• 제30권3호
• /
• pp.273-281
• /
• 1986

본 연구는 임피던스 파라미터(전기이중층 내의 미분용량 $C_d$, 용핵저향 $R_Q$, 전하이동저항 $R_t$,및 흡착유사용량 $C{\phi}$)를 결정하기 위해 정확한 측정식을 얻는데 주력하낟. 정현파가 정상상태에 있을 때 복소수함수 ${\omega}$중의 허수부분만을 으용하여 구한 전체임피던스식은 낮은 주파수에서 $|Z_{LF}|=1/{\omega}_{1C\phi}{\sqrt{1+{{\omega}_1}^2/{\omega}^2}$에, 높은 주파수에서는 $|Z_{HF}|={\omega}_2/({\omega}_1{\omega}_3C{\phi})({\omega}^2+{{\omega}_2}^2){\sqrt{{({\omega}^2+{\omega}_2{\omega}_3)}^2+{({\omega}_2{\omega}-{\omega_3{\omega})^2}}$에 따름을 나타낸다. 이들 임피던스 파라미터의 계산에 필요한 전체임피던수, 위상각 및 쎌전류값을 .5M $NA_2SO_4$ 또는 1M NaCl, 19.373% 해수, 1M HCl, 1M $KNO_3$ 지지전해질과 이들의 지지전해질내에 각각 $10^{-2}M Kl$ 또는 6mM DBNA를 첨가하여 20~60Hz 범위에서 실험적으로 측정하였다. 본 연구에서 유도한 식은 임피던스 파라미터 $C_d,\;C_{\phi},\;R_t$ 및 $R_Q$의 값들이 각각 $15{\sim}4{\mu}F/cm^2,\;162{\sim}758{\mu}F/cm^2,\;11.5{\sim}57.6ohm{\cdot}cm^2$ 및 $0.5{\times}10^{-2}{\sim}4.1{\sim}10^{-2}\;ohm{\cdot}cm^2$임을 보여준다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권3호
• /
• pp.155-160
• /
• 2000

The piezoelectric properties and the doping effect for$0.95Pb(Zr_xTi_{1-x})O_3+0.05Pb(Mn1/3Nb2/3)O_3$ compositions were studied. Also, the heat generation and the change of electromechanical characteristics, the important problem in practical usage, were investigated under high electric field driving. As a experiment results under low electric field, the values of kp and $\varepsilon33T$ were maximized, but Qm was minimized(Kp=0.57, Qm=1550) in the composition of x=0.51. In order to increase the values of Qm $Nb_2O_5$ was used as a dopant. As the result of that, the grain size was suppressed and the uniformity of grain was improved. Also, the values of kp decreased, and the values of Qm increased with doping concentration of $Nb_2O_5$. As a experiment results under high electric field driving, when vibration velocity was lower than 0.6[m/s], the temperature increase was $20[^{\circ}C]$, and the change ratio of mechanical quality factor was less than 10[%]. So, its electromechanical characteristics was very stable. Conclusively, piezoelectric ceramic composition investigated at this paper is suitable for application to high power piezoelectric devices.

• 정보처리학회논문지C
• /
• 제10C권5호
• /
• pp.533-540
• /
• 2003

이동 통신의 발전으로 많은 사람들이 다양한 고품질의 응용 서비스를 손쉽게 제공받고 있다. 그러나 이러한 서비스가 이동 통신상에서 제공되면 유선망에 비해 많은 취약성을 가지게 되고, 단말기 성능의 제약으로 수행될 수 있는 작업에도 한계가 있다. 따라서 본 논문에서는 상대적으로 계산 능력이 뛰어난 대리자(proxy agent)를 통해 사용자의 계산량을 줄이면서 대리자의 부정을 방지할 수 있는 일회용 대리 서명 기법을 제안한다. 제안 방식은 실패-중단 서명기법[1]을 응용한 KBLK 방식[2]을 개선한 것으로 오직 한 개의 메시지에 대해서만 주어진 위임 정보로 대리 서명을 수행하여 대리자의 부정을 방지하도록 구성하였고, 전자 상거래와 같은 환경에서 원 서명자의 신분을 보호하도록 익명성의 기능을 추가하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권8호
• /
• pp.392-398
• /
• 2006

The properties of tunable dielectric materials on RF frequency band are important high tunability and low loss for RF variable devices, variable capacitor, phased array antenna and other components application. Various composite of BST(barium strontium titanate) ratio combined with other non-electrical active oxide ceramics have been formulated for such uses. We present the tunable properties and Curie temperature on BST thick films. The grain growth of the weight ratio of $BaTiO_3$ increased. This can be explained by the substitute $Sr^{2+}$ ion for $Ba^{2+}$ ion in the $BaTiO_3$ system. The Curie temperature was shifted to lower temperature with increasing $SrTiO_3$in the $BaTiO_3-SrTiO_3$ system, because of decreasing the lattice constant. Also, the dielectric constant, tunability and K-factor of $(Ba_xSr_{1-x})TiO_3$ at over the Curie temperature decreased, at over the $60^{\circ}C$ fixation, maximum dielectric constant at Curie temperature and hence sharper phase transformation occurred at Curie temperature. The result were interpreted as a process of internal stress relaxation resulting form the increase of $90^{\circ}$ domains induced the BST. As a result, It is concluded that over the Curie temperature, frequency response and DC field effect for the tunable properties of BST thick film are suppressed by the transition broadening. For the application of tunable devices, that the curie temperature was investigated to be increased.

• 한국운동역학회지
• /
• 제16권4호
• /
• pp.21-30
• /
• 2006

The purpose of the study is to search for the possibility of the application of kinematics analysis to physical education at schools and expand its scope of application. This study chose 9 college students majoring in physical education and classified them into type A group who can make the straight, vertical handstand, type B group whose waist is bent, type C group who cannot handstand completely. The center of mass, distance between hand and leg, and the angle and angular velocity of each joint were obtained. The result of this study is this. 1. The time for CM showed 6:4 for A group and 5:5 for B and C groups. The distance between hand and foot in the event 3 was 44% of the height for A group, and 41% for B and C groups. A Group showed the higher CM positional significant difference, it was vertically direction below the hip joint at front. For significant difference of the B Group showed horizontal and vertical velocity of the CM, the highest vertical was obtained in phase 3. The difference of angle of shoulder join in the flexion/extension was showed gradually extension event 2 and the height angular velocity was at phase 3 in the A group. 2 The analysis of the handstand motion revealed that the phase 3, but the maintenance of posture start part the handstand is also very important. Through these results, this study confirmed that the time for phase of the CM, horizontal and vertical positions, velocity, the distance between hands and foot, and the difference of the angle and angular velocity of hip joint and shoulder joint can be set as the variables of analysis. It was also definite cause that the handstand motions of college students majoring in physical education had many difference in performance.