• 제목/요약/키워드: Application-SoC

검색결과 914건 처리시간 0.029초

$^{13}$C NMR Study of the Application of the 'Tool of Increasing Electron Demand' to the 9-Aryl-tricyclo[3.3.1.0$^{2,8}$]non-9-yl, and 8-Aryl-Tetracyclo[3.2.1.0$^{2,7}$.0$^{4,6}$]oct-8-yl cations

  • Wie-Chang Jin;Gweon-Young Ryu;Chun Yoon;Shin Jung Hyu
    • Bulletin of the Korean Chemical Society
    • /
    • 제10권6호
    • /
    • pp.591-595
    • /
    • 1989
  • The$^{13}C$ NMR shifts of a series of para-substituted 9-aryl-tricyclo$[3.3.1.0^{2,8}]$non-9-yl and 8-aryl-tetracyclo$[3.2.1.0^{2,7}.0^{4,6}]$-oct-8-yl cations were measured in $FSO_3H/SO_2ClF \;at\; -90^{\circ}C\; or\; -70^{\circ}C$ in order to examine whether the ${\rho}^{c+}$ values can be used to explain the mechanism for the stabilization of the geometrically rigid cyclopropylcarbinyl cations. Plots of the ${\Delta}{\delta}^{c+}$ shifts against ${\sigma}^{c+}$ reveal excellent linear correlation. The tricyclononyl systems yield a ${\rho}^{c+}$ value of -4.95 with a correlation coefficient r = 0.9948. The tetracyclo-octanyl systems give a ${\rho}^{c+}$ value of -6.39 with r = 0.9943. A fair parallelism exists between the results of $^{19}F$ nmr studies and the change of ${\rho}^{c+}$ values in these cations. Accordingly, the present study established that the ${\rho}^{c+}$ value can be used as a mearsure of the geometric influence for the charge delocalization in cyclopropylcarbinyl cations.

전해질 분리판용 세라믹 부직포와 리튬염간의 반응성 (Reaction Behavior of Ceramic Mat with Lithium Salt for the Electrolyte Separators of Thermal Batteries)

  • 조광연;류도형;신동근;임경훈;진은주;김현이;하상현;최종화
    • 한국세라믹학회지
    • /
    • 제46권6호
    • /
    • pp.587-591
    • /
    • 2009
  • Lithium salt have been used mainly as electrolyte of thermal battery for electricity storage. Recently, The 3phase lithium salt(LiCl-LiF-LiBr) is tried to use as electrolyte of thermal battery for high electric power. It is reported that LiCl-LiF-LiBr salt have high ion mobility due to its high lithium ion concentration. Solid lithium salt is melt to liquid state at above $500{^{\circ}C}$. The lithium ion is easily reacted with support materials. Because the melted lithium ion has small ion size and high ion mobility. For the increasing mechanical strength of electrolyte pellet, the research was started to apply ceramic filter to support of electrolyte. In this study, authors used SiOC web and glass fiber filter as ceramic mat for support of electrolyte and impregnated LiCl-LiF-LiBr salt into ceramic mat at above $500{^{\circ}C}$. The fabricated electrolyte using ceramic mat was washed with distilled water for removing lithium salt on ceramic mat. The washed ceramic mat was observed for lithium ion reaction behavior with XRD, SEM-EDS and so on.

평판디스플레이를 위한 열압착법을 이용한 이방성 도전성 필름 접합 (Thermocompression Anisothropic Conductive Films(ACFs) bonding for Flat Panel Displays(FPDs) Application)

  • 박진석;조일제;신영의
    • 한국전기전자재료학회논문지
    • /
    • 제22권3호
    • /
    • pp.199-204
    • /
    • 2009
  • The effect of temperature on ACF thermocompression bonding for FPD assembly was investigated, It was found that Au bumps on driver IC's were not bonded to the glass substrate when the bonding temperature was below $140^{\circ}C$ so bonds were made at temperatures of $163^{\circ}C$, $178^{\circ}C$ and $199^{\circ}C$ for further testing. The bonding time and pressure were constant to 3 sec and 3.038 MPa. To test bond reliability, FPD assemblies were subjected to thermal shock storage tests ($-30^{\circ}C$, $1\;Hr\;{\leftrightarrow}80^{\circ}C$, 1 Hr, 10 Cycles) and func! tionality was verified by driver testing. It was found all of FPDs were functional after the thermal cycling. Additionally, Au bumps were bonded using ACF's with higher conductive particle densities at bonding temperatures above $163^{\circ}C$. From the experimental results, when the bonding temperature was increased from $163^{\circ}C$ to $199^{\circ}C$, the curing time could be reduced and more conductive particles were retained at the bonding interface between the Au bump and glass substrate.

DSK50을 이용한 16kbps ADPCM 구현 (Implementation of 16Kpbs ADPCM by DSK50)

  • 조윤석;한경호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 B
    • /
    • pp.1295-1297
    • /
    • 1996
  • CCITT G.721, G.723 standard ADPCM algorithm is implemented by using TI's fixed point DSP start kit (DSK). ADPCM can be implemented on a various rates, such as 16K, 24K, 32K and 40K. The ADPCM is sample based compression technique and its complexity is not so high as the other speech compression techniques such as CELP, VSELP and GSM, etc. ADPCM is widely applicable to most of the low cost speech compression application and they are tapeless answering machine, simultaneous voice and fax modem, digital phone, etc. TMS320C50 DSP is a low cost fixed point DSP chip and C50 DSK system has an AIC (analog interface chip) which operates as a single chip A/D and D/A converter with 14 bit resolution, C50 DSP chip with on-chip memory of 10K and RS232C interface module. ADPCM C code is compiled by TI C50 C-compiler and implemented on the DSK on-chip memory. Speech signal input is converted into 14 bit linear PCM data and encoded into ADPCM data and the data is sent to PC through RS232C. The ADPCM data on PC is received by the DSK through RS232C and then decoded to generate the 14 bit linear PCM data and converted into the speech signal. The DSK system has audio in/out jack and we can input and out the speech signal.

  • PDF

휴대폰에서 전력 시스템 설계와 체크리스트 (Power Electronics System Design and Checklist for Cellular Phone)

  • 신청호;조준동
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2008년도 하계학술대회 논문집
    • /
    • pp.345-347
    • /
    • 2008
  • 실제 휴대폰 환경에서 쓰이고 있는 전력 시스템이 어떻게 되어 있는지 고찰해보고, 어떤 것들이 문제가 되고 있으며, 그 해결방안으로는 어떤 것들이 있는지 알아본다. 각 regulator의 정의와 그 spec에 대하여 장단점 분석과 함께 실무적으로 어떻게 응용되고 있으며 미래의 발전방향은 어떻게 될 것인지 고찰한다. SoC(System on Chip)의 결정체인 휴대폰에서 전력 시스템 디자인이 차지하는 그 영향에 대해 논하고 그 application 관점에서 체크리스트를 만들어보기로 한다.

  • PDF

지상파 DMB방송 수신기 개발에 관한 연구 (The Study on Implementation of Receiver for Terrestrial DMB)

  • 원영진;나희수
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.1011-1012
    • /
    • 2006
  • In this paper, implementation process of standard platform for T-DMB Receiver in low-cost and small-size are following: First, implement SoC for 32 bit RISC CPU and 16 bit DSP, Hardware H.264 CODEC, Post Processor or Video Display, Audio Processor, I/O Device. Second, implement Real Time OS for flexible application. Third, propose simple architecture for interface with peripheral devices using one-chip processor.

  • PDF

消風散의 Allerhy 抑制 效能에 관한 硏究 (The study on thw Inhibitory effect of Allerg by SoPungSan)

  • 서형식;노석선
    • 한방안이비인후피부과학회지
    • /
    • 제13권1호
    • /
    • pp.22-29
    • /
    • 2000
  • This study was carried out to prove the effects of SPS on antioxidants, iching by histamine in human model and skin stimulus. The result were obtained as follows : 1. Antioxidants of SPS is better than Vitamine C and is not less than BHT(Dibutylated Hydroxytoluene). 2. Inhibitory effect of iching by histamine is better than Dermobate. 3. Skin stimulus is not in ROAT(Repeated Open Application Test).

  • PDF

초등 수학과 확률적 추론 지도에 관한 연구 (A Study on Teaching Probabilistic Reasoning of Elementary School Mathematics)

  • 김태욱;남승인
    • 한국수학교육학회지시리즈C:초등수학교육
    • /
    • 제9권2호
    • /
    • pp.75-87
    • /
    • 2005
  • For Probabilistic Reasoning Ability is useful to predict uncertain fact from information, it's getting more important. But when we consider the actual condition of teaching Probabilistic Reasoning Ability, it doesn't correspond with its importance. So the purpose of this study is, by developing Basic Contents of Probabilistic Reasoning Teaching; by developing and applying Probabilistic Reasoning Teaching Program, to study how the application of it effects the progress of the student's Probabilistic Reasoning Ability.

  • PDF

수학 수업에서의 관찰평가 방안 (The Observational Assessment in Math Class)

  • 강영란;남승인
    • 한국수학교육학회지시리즈C:초등수학교육
    • /
    • 제3권2호
    • /
    • pp.143-149
    • /
    • 1999
  • The Assessment using the observation is one of the common ways to know what the student knows and dose not. Using the obserbational Assessment, Teachers, analyzing student's growth, provide appropriate feed-back, and so they try to record every activities. but, accumulatively recording the result of observational assessment face time·spacial limits. and it is difficult to apply in a real classroom situation. Taking these into consideration, I'd like to take a look at the idea of check-list assessment that could record data observing student and contrive a practical ways of application.

  • PDF