• Transactions on Control, Automation and Systems Engineering
• /
• v.1 no.2
• /
• pp.141-146
• /
• 1999

This paper describes the communication method of an auto-startup system. The Auto-Startup system is designed to operate a nuclear power plant automatically during the startup operation . In general , the operations during startup in existing plant have only been manually controlled by the operator. The manual operation caused to the operator mistake. The Auto-Startup system consists of the Distributed Control System(DCS) and G2 (Expert System). Also, Functional Test Facility(FTF) provides the plant's real-data for an Auto-Startup system. So, it is necessary to develop the communication method between these systems. We developed two methods ; one is a network and the other is a hardwire line. To communicate between these systems (DCS-G2 and DCS-FTF) , we developed the communication program. In case of DCS-FTF, we used the TCP/IP and VXI. BUt, in case of DCS-G2 , we , what it called , developed the bridge program using the GSI(G2 Standard Interface). We test to check the function of the important parameter, in time, for analysis of the developed communication method. The results are a good performance when we check the communication time of important parameter. We conclude that Auto-startup system could save heat-up time about at least 5 hours and reduced the change of the reactor operation and trip.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.4
• /
• pp.783-793
• /
• 2010

Several multi-hop applications developed for vehicular ad hoc networks use broadcast as a means to either discover nearby neighbors or propagate useful traffic information to other vehicles located within a certain geographical area. However, the conventional broadcast mechanism may lead to the so-called broadcast storm problem, a scenario in which there is a high level of contention and collisions at the link layer due to an excessive number of broadcast packets. We present a fuzzy alert message dissemination algorithm to improve performance for road safety alert application in Vehicular Ad-hoc Network (VANET). In the proposed algorithm, when a vehicle receives an alert message for the first time, the vehicle rebroadcasts the alert message according to the fuzzy control rules for rebroadcast degree, where the rebroadcast degree depends on the current traffic density of the road and the distance between source vehicle and destination vehicle. Also, the proposed algorithm is the hybrid algorithm that uses broadcast protocol together with token protocol according to traffic density. The performance of the proposed algorithm is evaluated through simulation and compared with that of other alert message dissemination algorithms.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.1929-1950
• /
• 2020

Reliable and secure data transmission in the application environment assisted by the wireless sensor network is one of the major challenges. Problem like blind forwarding and data inaccessibility affect the efficiency of overall infrastructure performance. This paper proposes routing protocol for forwarding and error recovery during packet loss. The same is achieved by energy and hops distance-based formulation of the routing mechanism. The reachability of the intermediate node to the source node is the major factor that helps in improving the lifetime of the network. On the other hand, intelligent hop selection increases the reliability over continuous data transmission. The number of hop count is factor of hop weight and available energy of the node. The comparison over the previous state of the art using QualNet-7.4 network simulator shows the effectiveness of proposed work in terms of overall energy conservation of network and reliable data delivery. The simulation results also show the elimination of blind forwarding and data inaccessibility.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.2 s.34
• /
• pp.159-167
• /
• 2005

Through the increment of group oriented application services, the multicast communication in wire/wireless network has become a widely discussed researching topic. However solution for security, efnciency and scaleability of a multicast communications are not enough to be satisfactory. Tn this paper, we Propose a new secure, efficient and scalable multicasting protocols to provide a integrated multicast service. Our protocol is an authenticated key establishment protocol which has been designed specifically for use with low powered computationally weak equipment such as Cellular phone and PDA(Personal Digital Assistant).

• International journal of advanced smart convergence
• /
• v.5 no.2
• /
• pp.24-37
• /
• 2016

This paper proposes to increase the efficiency of energy in nodes, which rapidly drops during the transmission of the Low Energy Adaptive Clustering Hierarchy (LEACH), through the use of dual-hop layered application in the sensor field. Along with introducing the dual-hop method in the data transmission, the proposed single-hop method for short-range transmission and multi-hop transmission method between the cluster heads for remote transmission were also introduced. Additionally, by introducing a partial multi-hop method in the data transmission, a single-hop method for short range transmission method between the cluster heads for remote transmission was used. In the proposed DL-LEACH, the energy consumption of the cluster head for remote transmission reduced, as well as increased the energy efficiency of the sensor node by reducing the transmission distance and simplifying the transmission route for short-range transmission. As compared the general LEACH, it was adapted to a wider sensor field.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.2
• /
• pp.117-125
• /
• 2014

The EtherCAT protocol has become a very promising alternative for real-time industrial application due to its ability to eliminate uncertainties in the Ethernet. However, the extended markup language (XML) for the EtherCAT network system, which is required in the design, lacks systematic development to take advantage of model transformation techniques. This paper focuses on the system development procedure of the EtherCAT-based encoder system using the CANopen over EtherCAT (CoE) protocol. UML modeling is being adapted to design for XML of EtherCAT-based encoder system. To this purpose, this paper analyzes the object dictionary (OD) of a commercial encoder and CANopen over EtherCAT. A UML diagram is then designed based on the analysis, and XML is generated through the designed UML diagram. Finally, an experimental test_bed for the EtherCAT-based encoder system is implemented and its performance is compared with a commercial encoder.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.4
• /
• pp.247-253
• /
• 2008

The TMO may contain two types of methods, time-triggered methods(also called the spontaneous methods of SpMs) which are clearly separated from the conventional service methods (SvMs). The SpM executions are triggered upon design time whereas the SvM executions are triggered by service request message from clients. In this paper, we describes the application environment as the patient monitor telemedicine system with TMO structure. Vital sign information web viewer systems is also the standard protocol for medical image and transfer. In order to embrace new technologies as telemedicine service, it is important to develope the standard protocol between different systems in the hospital, as well as the communication with external hospital systems.

• ALGAE
• /
• v.32 no.3
• /
• pp.189-197
• /
• 2017

To quantify the abundance of the harmful dinoflagellate Cochlodinium polykrikoides in natural seawaters, we developed the innovative procedure using a droplet digital PCR (ddPCR) with C. polykrikoides-specific primers targeting the internal transcription sequence (ITS). The abundance of C. polykrikoides was estimated by the specific copy number of target ITS DNA segments per cell in cultures and natural water samples. The copy number per C. polykrikoides cell as acquired by ddPCR was $157{\pm}16$, which was evaluated against known cell numbers through a simplified protocol preparing DNAs. The abundances of C. polykrikoides in the waters of different locations estimated by ddPCR agreed with the number of cells visually counted under a microscope. This protocol was used to measure the abundance of C. polykrikoides close to and further off the southern coast of Korea in August of 2016 and 2017. The practical application showed that this method can reduce time for analysis and increase accuracy.

• Journal of The Korean Association of Information Education
• /
• v.12 no.1
• /
• pp.65-75
• /
• 2008

With the advent of convergence environment of broadcasting and communication, IPTV has been widely used. It provides services such as information, movie contents and broadcasting with TV through super-highway information networks. The purpose of this study is to suggest its educational applications to overcome the limits existing in the education. For this goal, we sought its concept and characteristic and drew educational implications by analyzing its contents. We also suggested what-if scenarios for its educational applications, considered its possibilities in educational applications and suggested the kinds of teaching-learning utilizing it and its educational applications for the various subjects. Finally, we examined problems which were considered before its applications in the education with the classification of legal, technical and educational problems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.576-583
• /
• 2010

Wireless Internet is the network which provides wireless access in order to serve the Internet connections and data communication through the mobile handsets. To get efficient wireless access to the Internet, we need the WAP (Wireless Application Protocol) gateway that performs protocol translation and contents conversion between two different networks. We need the capacity dimensioning of the WAP gateway system in order to provide the wireless Internet service stably and cost-effectively. We also need the traffic engineering methods including traffic modelling and forecasting for the economical facility investment. The existing method of WAP gateway capacity dimensioning was intuitive and qualitative. But in this paper, we deal with the capacity dimensioning analytically and quantitatively on the basis of WAP traffic description parameters and traffic forecasting method.