• Korean Journal of Human Ecology
• /
• v.9 no.3
• /
• pp.383-394
• /
• 2000

The purpose of this study was to investigate the degree of interest and application ability in meal management chapters of the middle school students, and to provide basic informations for the improvements of Home Economics curriculum and teaching projects. The subjects were 555 middle school students(275 males, 280 females) in Chunchon area, Kangwon-do. Research data were collected by means of the questionnaire and statistically analyzed by frequency, percentage, standard deviation, t-test, F-test and correlation analysis using SPSS/win. The results of this study were summarized as follows: There were significant differences in the degree of interest and application ability according to gender, school years, home economics scholastic achievements, and father's role in preparing meal. The degree of interest and application ability was significantly higher in female than male. First grade students showed more interest and higher application ability than the third year. In general, the higher home economics scholastic achievement was, the higher the degree of interest and application ability was. The more father's role was in preparing meal, the higher student's degree of interest and application ability was. There was significant correlation between the degree of interest and the degree of application ability.(r=0.853, p< .001)

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1332-1336
• /
• 1990

This paper deals with some analytical and experimental aspects to control a multi-magnet suspended vehicle. Because the response of a multi-magnet vehicle shows mutually coupled interaction, an analytical description of the vehicle dynamics is necessary. For numerical computations, a linearized modelling of vehicle dynamics is dicussed and computer simulation is carried out. And for the experiment, a test vehicle suspended by four magnets has been made and investigated by local control of each magnet. Two algorithms by PID and state feedback control law are used and compared with each other. Some kinds of disturbance characteristics and coupling effects of the width change of the test vehicle are experimented.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.463-469
• /
• 2016

This paper presents a compression-friendly low power test scheme in EDT environment. The proposed approach exploits scan slices reusing to reduce the switching activity during shifting for test scheme based on linear decompressor. To avoid the impact on encoding efficiency from resulting control data, a counter is utilized to generate control signals. Experimental results obtained for some larger ISCAS'89 and ITC'99 benchmark circuits illustrate that the proposed test application scheme can improve significantly the encoding efficiency of linear decompressor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.940-944
• /
• 2001

Shock environments are generally classified two categories; One is mechanical shock environments encountered in handling, transportation, and service environments. The other is pyrotechnic shock (or pyroshock) environments generally initiated by firing of an ordnance item to separate or release a structural member of fastener. The objective of this paper is to present a set of shock test methods - specific characteristics induced by many shock test devices, test objects properties, and shock environments. In addition, it is introduced the application of shock test in Korean aerospace development program and others with shock test facilities of Korea Aerospace Research Institute.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2434-2454
• /
• 2021

This paper developed the software testing factory-cloud testing platform (STF-CTP) to address the software compatible issues in various smart devices. Software developers who only require uploading the application under test (AUT) and test script can test plenty of smart devices in STF-CTP. The challenge for the cloud test platform is how to optimize the resource and increase the performance in the limited resource. This paper proposed a new scheduling mechanism and a new process of the system operation which is based on the OpenStack platform. We decrease about 40% memory usage of OpenStack server, increase 3% to 10% Android device usage of STF-CTP, enhance about 80% test job throughput and reduces about 40% test job average waiting time.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.09a
• /
• pp.93-99
• /
• 2004

At present, LG Electronics pushes ahead to eliminate the Pb(Lead) -a hazardous material- from all products. Especially, we have performed to select the optimum standard composition of lead free alloy for the application to products for about 3 years from 2000. These days, we have the chance for applying to the mass-production. This project constructed the system for applying the lead free solders on consumer electronic products, which is one of the major products of the LG Electronics. To select the lead free solders with corresponding to the product features, we have passed through the test and applied with Sn-3.0Ag-0.5Cu alloy system to our products, and for the application to the high melting temperature composition, we secured the thermal resistance of the many parts and substrate and optimized the processing conditions. We have operated the temperature cycling test and the high temperature storage test under the standards to confirm the reliability of the products. On these samples, we considered the consequence of our decision by the operating test. For the long life time of the product, we have operated the temperature cycling test at $-45^{\circ}C-+125^{\circ}C$, 1 cycle/hour, 1000 cycles. Also we have tested the tin whisker growth about lead free plating on lead finish. We have analyzed with the SEM, EDS and any other equipment for confirming the failure mode at the joint and the tin whisker growth on lead free finish.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.3
• /
• pp.11-21
• /
• 2017

PURPOSE: The purpose of this study is to identify the immediate effect of posterior pelvic tilt taping on anterior pelvic inclination, gait function, and balance in chronic stroke patients. METHODS: Fourteen chronic stroke subjects were enrolled in this study. Subjects who consented to participate in this cross-over experiment were assigned three interventions: posterior pelvic tilt taping, placebo taping, and no taping, in random order. After tape application, subjects were asked to complete: 1) Anterior pelvic tilt measurement, 2) 10-Meter Walk test, and 3) Limits of stability (LOS) test. To eliminate the learning effect of the tape after tearing off the tape, a 10 minute break was given between posterior pelvic tilt taping intervention and placebo taping intervention. RESULTS: Significant decreases were observed for the anterior pelvic inclination on both sides after posterior pelvic tilt taping application compared with placebo taping and no taping application (p<.05). Post hoc test results differed significantly in the 10-meter walk test after intervention (p<.05). However, there were no significant differences in limits of stability test after intervention (p>.05). CONCLUSION: Posterior pelvic tilt taping in chronic stroke patients decreases the inappropriate anterior pelvic inclination immediately and improves gait function, but it has little effect on balance.

• Geomechanics and Engineering
• /
• v.9 no.4
• /
• pp.483-498
• /
• 2015

This article describes a new in-situ load test called the Hydraulic Cylinder Test (HCT) and its application to determine the geotechnical properties of soil-rock mixtures. The main advantages of the test are its easy implementation, speed of execution and low-cost. This article provides a detailed description of the equipment and the test procedure, and examines a case study of its application to determine the geotechnical properties of an earth-filled dam for a tailings pond. The containment dams of the ponds are made from blocks of gypsum and marl, obtained from the excavation of the ponds, mixed in a matrix of sands and clays. The size of the rocks varies between 1 and 30 cm. The HCT is particularly useful for determining the geotechnical properties of this type of soil-rock mixture. Nine HCTs were carried out to determine its strength (c, ${\phi}$) and deformation (B, G) properties. The results obtained were validated using the Bim strength criterion, recently proposed, and some pressure meter tests carried out beforehand. The properties obtained are used to analyze the stability of the dam using computer simulations and a modification to its design is proposed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.1
• /
• pp.81-89
• /
• 1995

The aim of the work described in this paper is to develope a constitutive model for the prediction of an unsaturated Soil and to confirm the application of the model, which is composed of the elastic and plastic part in consideration of the matric suction and the net mean stress. From test results, volume changes and deviator stresses are analyzed at each state and their relationships are formulated. And the application of the model to silty sands is con- firmed by the comparison between test and predicted results. During drying-wetting and loading-unloading processes for isotropic states, the agreement between predicted and test results are satisfactory. And predicted deviator stresses are well agreed with test results in shearing process. Overall acceptable predictions are reproduced in high confining pressure. Usefulness of the model is confirmed for the unsat- urated soil except volumetric strain, which is not well agreed with the test results due to deficiency of dilatancy of the model in low confining pressure. It is, therefore, recom- mended to study the behavior of dilatancy for an unsaturated soil.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.707-717
• /
• 2021

The purpose of this study was to explore whether PPAT drawing using an application can be developed on digital devices for game addicts. The PPAT drawing test is useful and reliable for verifying problem-solving skills in how people pick apples. As a result of this study, the over-immersion group scored lower than the average user group in the "problem Solving" category of the PPAT drawing test using the PPAT drawing applicaion on digital devices, and expressed by not reaching for apples, or by picking apples without reasonable support. The findings in this study suggest that the PPAT drawing test application on digital devices has significantly demonstrated its original purpose of 'problem resolution', as well as future psychotherapeutic interventions for Internet over-immersion subjects as well as users who are familiar with digital devices.