• Title/Summary/Keyword: Application Conditions

검색결과 6,012건 처리시간 0.491초

운영기반의 철도시스템 RAMS 성능 요구사항 설계에 관한 연구 (A Study on Operational Optimization Based RAMS Performance Requirements Design of Railway Systems)

  • 최성호;김길동;구정서
    • 전기학회논문지
    • /
    • 제67권11호
    • /
    • pp.1549-1554
    • /
    • 2018
  • Recently the design of railway systems have been performed, based on the analysis of operational conditions and service targets, it is to optimize the effectiveness and efficiency of system operation. Many RAMS requirements have been developed to transform operation conditions into system design characteristics. However, our railway industry has not actived the application of RAMS into system design performance. According to short of RAMS application, many technologies that have been developed are not only applied the existing systems that is operating, but also have not succeed to apply for new systems. In order to design the effective and efficient railway systems that are optimized to operation conditions and service targets, a systems approach and RAMS management are necessary in railway development, operation and maintenance. Therefore, in this study, the RAMS performance requirement design methods are discussed. the allocation methods from system level to each devices of subsystems.

Evaluation of dental panoramic radiographic findings in edentulous jaws: A retrospective study of 743 patients "Radiographic features in edentulous jaws"

  • Kose, Taha Emre;Demirtas, Nihat;Karabas, Hulya Cakir;Ozcan, Ilknur
    • The Journal of Advanced Prosthodontics
    • /
    • 제7권5호
    • /
    • pp.380-385
    • /
    • 2015
  • PURPOSE. The aim of this study was to determine the frequency of significant panoramic radiographic findings and eventual treatment requirements before conventional or implant supported prosthetic treatment in asymptomatic edentulous patients. MATERIALS AND METHODS. A total of 743 asymptomatic edentulous patients were retrospectively evaluated using a digital panoramic system. We analyzed the radiographic findings, including impacted teeth, retained root fragments, foreign bodies, severe atrophy of the posterior maxillary alveolar bone, mucous retention cysts, soft tissue calcifications and radiopaque-radiolucent conditions. RESULTS. Four-hundred-eighty-seven (65.6%) patients had no radiographic finding. A total of 331 radiographic findings were detected in 256 (34%) patients. In 52.9% (n=175) of these conditions, surgical treatment was required before application of implant-supported fixed prosthesis. However, before application of conventional removable prosthesis surgical treatment was required for 6% (n=20) of these conditions. CONCLUSION. The edentulous patients who will have implant placement for implant-supported fixed prosthesis can frequently require additional surgical procedures to eliminate pathological conditions.

Multiscale Simulation of Yield Strength in Reduced-Activation Ferritic/Martensitic Steel

  • Wang, Chenchong;Zhang, Chi;Yang, Zhigang;Zhao, Jijun
    • Nuclear Engineering and Technology
    • /
    • 제49권3호
    • /
    • pp.569-575
    • /
    • 2017
  • One of the important requirements for the application of reduced-activation ferritic/martensitic (RAFM) steel is to retain proper mechanical properties under irradiation and high-temperature conditions. To simulate the yield strength and stress-strain curve of steels during high-temperature and irradiation conditions, a multiscale simulation method consisting of both microstructure and strengthening simulations was established. The simulation results of microstructure parameters were added to a superposition strengthening model, which consisted of constitutive models of different strengthening methods. Based on the simulation results, the strength contribution for different strengthening methods at both room temperature and high-temperature conditions was analyzed. The simulation results of the yield strength in irradiation and high-temperature conditions were mainly consistent with the experimental results. The optimal application field of this multiscale model was 9Cr series (7-9 wt.%Cr) RAFM steels in a condition characterized by 0.1-5 dpa (or 0 dpa) and a temperature range of $25-500^{\circ}C$.

Change reaction of fatigue recovery material before and after taping during isokinetic exercise

  • CHOI, Seung-Chul;LEE, Sang-Ho;KIM, Jun-Su
    • 식품보건융합연구
    • /
    • 제7권3호
    • /
    • pp.25-32
    • /
    • 2021
  • This study examined the effects of kinesio taping on recovery from fatigue induced by an exercise of concentric contraction using an isokinetic machine. The fatigue was introduced by a mode of exercise at 60°/sec, 50 repetitions for three sessions. The changes of blood ammonia, lactate, LDH, and CK as a marker of fatigue were monitored. Eight healthy collegiate students participated in two experiments; 1) kinesio taping application condition and 2) no kinesio taping application condition. Before experiments, their physical characteristics were measured. For the experiment, blood samples were taken before and immediately after exercise, and 24hr as well as 72hr of recovery period. Window SPSS package 12.0 version was used and one-way ANOVA with repeated measures were employed. The results were as follows. 1) Blood ammonia tended to reduce along the recovery, but no differences between conditions were noticed. 2) Blood lactate tended to reduce during the recovery period, but differences between conditions were not noticed. 3) The LDH was not different between conditions and CK tended to reduce during the recovery period, but differences between conditions were not noticed. Based on the results, kinesio taping did not influence on recovery phase of blood ammonia, lactate concentration, LDH, and CK.

무인헬리콥터를 이용한 항공방제시스템 개발(I) - 항공방제시스템 구축을 위한 기초 분무특성 - (Development of Aerial Application System Attachable to Unmanned Helicopter - Basic Spraying Characteristics for Aerial Application System -)

  • 강태경;이채식;최덕규;전현종;구영모;강태환
    • Journal of Biosystems Engineering
    • /
    • 제35권4호
    • /
    • pp.215-223
    • /
    • 2010
  • In order to develop an precision aerial pesticide application system to be attached to an unmanned helicopter which can be applied to small lots of land, this study analyzed the flowing and spraying characteristics of the spray droplets by the main rotor downwash by setting the application conditions at the flight altitude of 3 m, the diameter of main rotor of 3.1 m, the boom length of around 2.8 m, and the spraying rate of 8 L/ha. The results of this study are summarized below. Through analysis of the covering area ratio of the spray droplets by main rotor downwash by nozzle type, boom with tilt angle and height, it was found that the covering area ratio of the twin flat-fan nozzle of around 25% was more uniform than other types of nozzle, also boom with $10^{\circ}$ tilt angle and spraying height of 3 m was shown to be the appropriate conditions for aerial application of pesticides. It was found that the nozzle position to minimize the scattering loss of spray droplets due to vortex phenomenon at both ends of the main rotor was around 10 cm from the end of the main rotor. An application test for the aerial pesticide application system attached to the HUA-ACEI unmanned helicopter developed by the Rural Development Administration showed that the range of covering area ratio of the spray droplets was 10-25%, and the spraying width was approximately 7 m when over 10% of covering area ratio was considered for valid spraying.

ANALYSIS OF A FOURTH ORDER SCHEME AND APPLICATION OF LOCAL DEFECT CORRECTION METHOD

  • Abbas, Ali
    • Journal of applied mathematics & informatics
    • /
    • 제32권3_4호
    • /
    • pp.511-527
    • /
    • 2014
  • This paper provides a new application similar to the Local Defect Correction (LDC) technique to solve Poisson problem -u"(x) = f(x) with Dirichlet boundary conditions. The exact solution is supposed to have high activity in some region of the domain. LDC is combined with a fourth order compact scheme which is recently developed in Abbas (Num. Meth. Partial differential equations, 2013). Numerical tests illustrate the interest of this application.

ON VARIATIONAL PROBLEMS INVOLVING HIGHER ORDER DERIVATIVES

  • HUSAIN I.;JABEEN Z.
    • Journal of applied mathematics & informatics
    • /
    • 제17권1_2_3호
    • /
    • pp.433-455
    • /
    • 2005
  • Fritz John, and Karush-Kuhn-Tucker type optimality conditions for a constrained variational problem involving higher order derivatives are obtained. As an application of these Karush-Kuhn-Tucker type optimality conditions, Wolfe and Mond-Weir type duals are formulated, and various duality relationships between the primal problem and each of the duals are established under invexity and generalized invexity. It is also shown that our results can be viewed as dynamic generalizations of those of the mathematical programming already reported in the literature.

ON FRACTIONAL PROGRAMMING CONTAINING SUPPORT FUNCTIONS

  • HUSAIN I.;JABEEN Z.
    • Journal of applied mathematics & informatics
    • /
    • 제18권1_2호
    • /
    • pp.361-376
    • /
    • 2005
  • Optimality conditions are derived for a nonlinear fractional program in which a support function appears in the numerator and denominator of the objective function as well as in each constraint function. As an application of these optimality conditions, a dual to this program is formulated and various duality results are established under generalized convexity. Several known results are deduced as special cases.

모형토조실험을 통한 말뚝지지력의 평가 (Evaluation of Pile Bearing Capacity using Calibration Chamber Test)

  • 이인모;이명환
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1992년도 봄 학술발표회 논문집 깊은 기초의 연구와 실무(RESEARCH AND PRACTICE OF DEEP FOUNDATIONS)
    • /
    • pp.13-40
    • /
    • 1992
  • Static formulae based on limiting equilibrium theories often provide misleading predictions of pile bearing capacity in cohesionless soils due to the incorrect basic assumptions or oversimplification of actual soil conditions. Soil conditions prior to pile driving are significantly changed after pile installation and imposition of high stress levels. Therefore soi1 parameters at failure rather than those obtained at initial conditions should be used in application of static formulae. In this research. model pile test data were analyzed and compared with the predicted values obtained from the various static formulae. The results showed that the proper choice of soil parameters remarkably improve the reliability of static formulae.

  • PDF

Existence and Uniqueness of Solutions of Fractional Differential Equations with Deviating Arguments under Integral Boundary Conditions

  • Dhaigude, Dnyanoba;Rizqan, Bakr
    • Kyungpook Mathematical Journal
    • /
    • 제59권1호
    • /
    • pp.191-202
    • /
    • 2019
  • The aim of this paper is to develop a monotone iterative technique by introducing upper and lower solutions to Riemann-Liouville fractional differential equations with deviating arguments and integral boundary conditions. As an application of this technique, existence and uniqueness results are obtained.