• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.7
• /
• pp.594-598
• /
• 2008

The metal catalyst particles which there is as impurities on a tip part of carbon nanotube (CNT) are not good to apply it to a nano-electronic device. It was very important the opening of CNT-tip to fix a target bio material and a material to accept in CNT in a biosensor, so we performed $HNO_3$ wet etching to remove the metal catalyst particle which there was on a tip part of CNT grown up in the study and observed the opened CNT-tip with etching time. We synthesized the CNTs using a HF-PECVD method and choses the CNT length of 700 nm for the application of nano-electronic device such as a biosensor etc.. We observed the opened CNT-tip with wet etching times of $HNO_3$ (10, 30, 60 min). From the results, we observed that the CNT-tip was opened with the increase of wet etching time lively. In case of CNTs etched during 60 min, we confirmed that there was not the ratio of Ni included in CNTsI as catalyst. Conclusively, in the case of CNT etched for 60 minutes, it is completely good for application of a biosensor and, in addition, the metal-free CNTs will contribute to the application of other nanoelectronic devices.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.6
• /
• pp.72-82
• /
• 2000

Many lot of books introduce the methods to calculate the time of concentration, and these are described as various forms of formulas. There are few formulas appropriate for our basin characteristics Therefone, there are problems to make excessive or less estimation when these formulas are used. To solve these problems, comparison of formulas and sensitivity analysis for them were made with converting parameters. Finally, Time of concentration was estimated to derive Application limits for 3 watersheds by standardized formulas. In the case of input parameters analysis, SCS formula has the highest value by the length, Kerby by the height and SCS by the slope, respectively, while Kraven formula has the lowest value among them. Concerning the relative sensitivity by Taylor series, the time of concentration showed the constant effect while increasing of the length and slope, and the length was more sensitive than the slope in parameters. Finally the standardization formula developed in this study was applied to derive application limits for 3 watersheds(total 17 subbasins). In this case, Rziha(8 subbasins) and SCS(9 subbasins) formulas were the most similar to observed data of total 17 subbasins respectively. Application limits were about 300~500$\textrm{km}^2$ area, 30~60km length and under 0.01 slope for Rziha formula and about 100~200$\textrm{km}^2$ area, 10~30km length, and over 0.01 slope for SCS formula, respectively.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.1789-1794
• /
• 2014

This paper suggests an application method for a superconducting fault current limiter (SFCL) using an evaluation index to estimate the risk regarding the short-circuit capacity of the circuit breaker (CB). Recently, power distribution systems have become more complex to ensure that supply continuously keeps pace with the growth of demand. However, the mesh or loop network power systems suffer from a problem in which the fault current exceeds the short-circuit capacity of the CBs when a fault occurs. Most case studies on the application of the SFCL have focused on its development and performance in limiting fault current. In this study, an analysis of the application method of an SFCL considering the risk of the CB's short-circuit capacitor was carried out in situations when a fault occurs in a loop network power system, where each line connected with the fault point carries a different current that is above or below the short-circuit capacitor of the CB. A loop network power system using PSCAD/EMTDC was modeled to investigate the risk ratio of the CB and the effect of the SFCL on the reduction of fault current through various case studies. Through the risk evaluations of the simulation results, the estimation of the risk ratio is adequate to apply the SFCL and demonstrate the fault current limiting effect.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.59
• /
• pp.59-78
• /
• 2013

The interpretation and application of investment treaties takes place mostly by ad hoc tribunals. Their composition varies from case to case. But in interpreting and applying investment treaties are bound to exist on a ground rule and coherent criteria. Given summarizing contents of this study, those are as follows. When interpreting investment treaties, (i) most tribunals is based on Article 31 and 32 of the VCLT, (ii) tribunals rely on previous decisions, (iii) tribunals resort to travaux pr$\acute{e}$paratoires, (iv) tribunals consider the interpretative statement. When applying investment treaties, (i) treaties apply only in relation to acts or events that occurred after their entry into force, (ii) tribunals have applied different inter-temporal rules to jurisdictional clauses and substantive provisions in treaties, (iii) the relevant date for purposes of jurisdiction is the date of the institution of proceedings, (iv) Under the ICSID convention, the host state and investor's nationality must be a party to the convention on the date the proceedings are instituted. This study is expected to possibly become guideline in the interpretation and application standards of investment treaties. So future disputes can be prevented and prepared in advance.

• Korean Institute of Interior Design Journal
• /
• v.20 no.5
• /
• pp.245-253
• /
• 2011

As interests towards health rapidly increase recently, interests and demand for hospital interior space are increasing as well. Therefore, most of today's hospitals that have been functionally designed are transforming into healing environments that consider psychological aspects, in order to assist patients forget about fear, desperation and have peace of mind. With such creation method of healing environment, natural elements can be applied to spaces in order to allow patients feel vitality, hope and adapt positive thinking, and these can eventually lead to affluent fusion of humans, nature and space. Through case analyses of how natural elements are applied to hospital's interior space, this study understands its characteristics. According to the findings, nature is largely classified into light, water, plant, stone/soil, and its application methods can be classified into center, transition, continuity, division, opening and closure. As evident from case analyses, application of natural elements to hospital's interior space promotes exchanges among patients through community formation, and achieves the effect of spatial concentration and public place. Also, ambiguity of exterior and interior boundary creates a sense of expansion and continuous effect, and can also provide a healing environment that can fully absorb natural environment open to patients. This study aims to be of service when designing hospital's interior space, with its natural element application method for healing environment research, and wishes for continuous studies on healing environments with more diverse methods.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.6
• /
• pp.569-581
• /
• 2001

XML Schema which enables the second revolution of Internet with XML rapidly emerging as a standard for XML document structure modeling. XML Schema modeling has more complex structures and information than DTD modeling. In this reason, XML Schema modeling tool which has some more specialized functionalities others is needed. In this paper, we have developed the XML application development method called \"Design and develop\" and implemented the prototype system named XSD4j which supports UML based XML Schema modeling and provides a XML application development platform. Using XSD4j, developers can get an easy and conceptual schema modeling method, XML storage schema for XML document, and persistent DOM API which is a standard interface between document and application program.n program.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.2
• /
• pp.36-44
• /
• 2012

Adoption and practical application of BPM yet remains at a theoretic and methodological level for many industrial sectors. As for construction industry, adapting BPM into enterprise resource across all business processes could cause problems due to rapid change in corporate operation systems. Furthermore, it is unable to predict potential risks of business process while BPM are being applied. Therefore, applying BPM model to core strategy and individual task seems more effective than applying BPM model to the entire enterprise resource planning. In this paper, we define BPM and suggest a BPM model by analyzing each business unit in order to evaluate each business unit which is included in the business process architecture based on quantitative standards. This paper also presents a sequential application plan for business process model. Finally, a case study is demonstrated for the application of BPM system, focusing on cost management business, which turned out to be a top priority in the aspect of efficiency and ease based on priority analysis.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.157-163
• /
• 1999

The purpose of this study was to investigate the effect of electromagnetic field in orthodontic tooth movement, and the optimal application period of electromagnetic field to initiate tooth movement. Eighty male Hartley guinea pigs were utilized in this study. Laterally directed orthodontic force was applied to the maxillary central incisors. Half sine-wave pulsed electromagnetic field(HSPEMP) was applied to experimental group during 10 days. According to the period of application of HSPEMP(4 hours, 8 hours, 12 hours a day), they were divided into the three sub-groups The obtained results were as follows; 1. In case of application of HSPEMF during 4 hours a day, there was no significant difference in the final amount of orthodontic tooth movement between the experimental and the control group. 2. In case of application of HSPEMF during 8 and 12 hours a day, there was a significant increase in the final amount of orthodontic tooth movement since the eighth day, the sixth day respectively. 3. In comparison with the case of application of HSPEMF during 8 hours a day, there was a significant increase in the final amount of orthodontic tooth movement at the seventh day and the eighth day in case of application of HSPEMF during 12 hours a day.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.7
• /
• pp.73-86
• /
• 2006

Concentrated poultry production in the State of Alabama, U.S.A. results in excessive poultry litter. Application of poultry litter to pastures and row crops serves as a cheap alternative to commercial fertilizer. However, over the years, poultry litter application to perennial forage crops in the Appalachian Plateau region of North Alabama has resulted in phosphorus (P) buildup in soils. Phosphorus index (P-index) and comprehensive nutrient management plans (CNMP) are often used as a best management practice (BMP) for proper land application of litter. Because nutrient management planning is often not done for small animal feeding operations (AFOs), and also because, in case of excess litter, litter transportation infrastructure has not been developed, over application of poultry litter to near by area is a common practice. To alleviate this problem, optimal poultry litter management and transportation infrastructure needs to be developed. This paper presents a methodology to optimize poultry litter application and transportation through efficient nutrient management planning and transportation network analysis. The goal was accomplished through implementation of three important modules, a P-Index module, a CNMP module, and a transportation network analysis module within ArcGIS, a Geographic Information System (GIS). The CNMP and P-Index modules assist with land application of poultry litter at a rate that is protective of water quality, while the transportation network analysis module helps transport excess litter to areas requiring litter in the Appalachian Plateau and Black Belt (a nutrient-deficient area) regions. Once fully developed and implemented, such a system will help alleviate water quality problems in the Appalachian Plateau region and poor soil fertility problems in the Black Belt region by optimizing land application and transportation. The utility of the methodology is illustrated through a hypothetical case study.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.5
• /
• pp.455-467
• /
• 2015

Objective: The present study suggested practical measures for successful patent registration based on a review of success and failure cases of patent application filed based on inventions obtained from physical ergonomics research. Background: The protection of intellectual property (IP) contributes to economic growth and competitiveness and facilitates innovation and creativity. IP rights are pursued on research findings for effective technology transfer and commercialization; however, a patent application can be rejected if patentability requirements such as patent eligible subject matter, utility for industrial application, novelty, or non-obviousness are not satisfied. Method: Three successful and three failed cases of patent applications based on physical ergonomics research were reviewed, critical reasons for their successes and failures were examined, and measures were proposed to avoid failures in patent registration. Results: The following measures were identified based on the patent application case review. First, abstract ideas including logical procedures and/or mathematical formulas need to include use of tangible apparatus and methods in idea realization. Second, the provision of grace period inventor disclosure exception needs to be properly followed in case an invention is disclosed before filing of patent application. Lastly, a comprehensive analysis of prior art published or publicly known anywhere in the world and a claim preparation of distinguished, non-trivial features compared to prior art solutions are needed to avoid possible violation of novelty and non-obviousness. Application: The proposed measures can help to prepare a patent application with patent eligibility.