• 제목/요약/키워드: Appliances

검색결과 1,612건 처리시간 0.033초

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

훈증소독제, Fumagari OPP®의 Staphylococcus aureus에 대한 살균효과 (Bactericidal Efficacy of Fumagari OPP®, Fumigant Against Staphylococcus aureus)

  • 차춘남;박은기;최현주;김용팔;유창열;김석;이후장
    • 한국식품위생안전성학회지
    • /
    • 제28권4호
    • /
    • pp.349-353
    • /
    • 2013
  • 본 연구는 20% ortho-phenylphenol을 함유한 훈증소독제, Fumagari OPP$^{(R)}$의 Staphylococcus aureus (S. aureus)에 대한 살균효과를 평가하기 위해, French standard NF T 72-281에 따라 수행하였다. 배양 현탁액 중 S. aureus의 균수 (N 값), 훈증소독제에 노출된 각 담체의 균수 (n1, n2, n3), 평판배지법에 의한 시험균주 현탁액 중 균수 (N1), 여과법에 의한 시험균주 현탁액 중 균수 (N2), 그리고 대조담체의 회복 균수의 평균값 (T 값)을 예비실험을 통해 구하였다. 또한, 훈증소독제에 노출된 S. aureus의 감소 균수 (d 값)는, T 값, 회복액 중 균수의 평균값 (n'1) 그리고 배지의 담체에서 증식한 균수의 평균값 (n'2) 등을 이용하여 산출하였다. N 값은 $4.0{\times}10^8$ CFU/mL이었으며, n1, n2, n3은 각각 0.5N1, 0.5N2, 0.5N1 보다 높게 나타났다. 그리고 T값은 $3.4{\times}10^6$ CFU/mL이었다. 훈증소독제의 살균효과에 있어서, d 값은 6.43 logCFU/mL이었다. 훈증소독제에 대한 프랑스 기준에 따르면, 효과적인 살균력을 갖는 훈증소독제의 d 값이 5 logCFU/mL 이상이어야 하는 것으로 규정하고 있다. 본 연구의 결과로부터, Fumagari OPP$^{(R)}$는 S. aureus에 대해 높은 살균효과를 갖는 것으로 나타나, 병원성 세균으로 오염된 식품재료와 주방기기의 소독에 적용할 수 있을 것으로 사료된다.

Wearable Computers

  • Cho, Gil-Soo;Barfield, Woodrow;Baird, Kevin
    • 섬유기술과 산업
    • /
    • 제2권4호
    • /
    • pp.490-508
    • /
    • 1998
  • One of the latest fields of research in the area of output devices is tactual display devices [13,31]. These tactual or haptic devices allow the user to receive haptic feedback output from a variety of sources. This allows the user to actually feel virtual objects and manipulate them by touch. This is an emerging technology and will be instrumental in enhancing the realism of wearable augmented environments for certain applications. Tactual displays have previously been used for scientific visualization in virtual environments by chemists and engineers to improve perception and understanding of force fields and of world models populated with the impenetrable. In addition to tactual displays, the use of wearable audio displays that allow sound to be spatialized are being developed. With wearable computers, designers will soon be able to pair spatialized sound to virtual representations of objects when appropriate to make the wearable computer experience even more realistic to the user. Furthermore, as the number and complexity of wearable computing applications continues to grow, there will be increasing needs for systems that are faster, lighter, and have higher resolution displays. Better networking technology will also need to be developed to allow all users of wearable computers to have high bandwidth connections for real time information gathering and collaboration. In addition to the technology advances that make users need to wear computers in everyday life, there is also the desire to have users want to wear their computers. In order to do this, wearable computing needs to be unobtrusive and socially acceptable. By making wearables smaller and lighter, or actually embedding them in clothing, users can conceal them easily and wear them comfortably. The military is currently working on the development of the Personal Information Carrier (PIC) or digital dog tag. The PIC is a small electronic storage device containing medical information about the wearer. While old military dog tags contained only 5 lines of information, the digital tags may contain volumes of multi-media information including medical history, X-rays, and cardiograms. Using hand held devices in the field, medics would be able to call this information up in real time for better treatment. A fully functional transmittable device is still years off, but this technology once developed in the military, could be adapted tp civilian users and provide ant information, medical or otherwise, in a portable, not obstructive, and fashionable way. Another future device that could increase safety and well being of its users is the nose on-a-chip developed by the Oak Ridge National Lab in Tennessee. This tiny digital silicon chip about the size of a dime, is capable of 'smelling' natural gas leaks in stoves, heaters, and other appliances. It can also detect dangerous levels of carbon monoxide. This device can also be configured to notify the fire department when a leak is detected. This nose chip should be commercially available within 2 years, and is inexpensive, requires low power, and is very sensitive. Along with gas detection capabilities, this device may someday also be configured to detect smoke and other harmful gases. By embedding this chip into workers uniforms, name tags, etc., this could be a lifesaving computational accessory. In addition to the future safety technology soon to be available as accessories are devices that are for entertainment and security. The LCI computer group is developing a Smartpen, that electronically verifies a user's signature. With the increase in credit card use and the rise in forgeries, is the need for commercial industries to constantly verify signatures. This Smartpen writes like a normal pen but uses sensors to detect the motion of the pen as the user signs their name to authenticate the signature. This computational accessory should be available in 1999, and would bring increased peace of mind to consumers and vendors alike. In the entertainment domain, Panasonic is creating the first portable hand-held DVD player. This device weight less than 3 pounds and has a screen about 6' across. The color LCD has the same 16:9 aspect ratio of a cinema screen and supports a high resolution of 280,000 pixels and stereo sound. The player can play standard DVD movies and has a hour battery life for mobile use. To summarize, in this paper we presented concepts related to the design and use of wearable computers with extensions to smart spaces. For some time, researchers in telerobotics have used computer graphics to enhance remote scenes. Recent advances in augmented reality displays make it possible to enhance the user's local environment with 'information'. As shown in this paper, there are many application areas for this technology such as medicine, manufacturing, training, and recreation. Wearable computers allow a much closer association of information with the user. By embedding sensors in the wearable to allow it to see what the user sees, hear what the user hears, sense the user's physical state, and analyze what the user is typing, an intelligent agent may be able to analyze what the user is doing and try to predict the resources he will need next or in the near future. Using this information, the agent may download files, reserve communications bandwidth, post reminders, or automatically send updates to colleagues to help facilitate the user's daily interactions. This intelligent wearable computer would be able to act as a personal assistant, who is always around, knows the user's personal preferences and tastes, and tries to streamline interactions with the rest of the world.

  • PDF

혀 유지구의 크기와 유지력 평가 (Size and Retention of Tongue Bulb for Tongue Retaining Device)

  • 박남선;이기호;김미은;김기석
    • Journal of Oral Medicine and Pain
    • /
    • 제32권3호
    • /
    • pp.283-292
    • /
    • 2007
  • 구강장치를 이용한 코골이와 수면무호흡증의 치료는 하악이나 혀를 전방으로 이동시켜 기도공간을 확보하는데, 하악전방이동장치(mandibular advancement appliance, MAA)와 혀견인장치(tongue retaining device, TRD)가 주로 이용된다. 이 중 혀견인장치는 전치의 순측에 위치되는 혀 유지구(tongue bulb) 속에 생기는 음압을 이용하여 혀가 뒤로 밀리지 않도록 하는 구강장치로서 단독 혹은 하악전방이동장치와 복합된 형태로 사용하여 코골이와 수면무호흡증의 치료에 효과를 보이는 것으로 보고되고 있다. 본 연구는 혀견인장치의 제작을 용이하게 하고 표준화하기 위해 개개인에 적합한 혀 유지구의 크기를 조사하여 분류하고 혀 유지구의 크기와 유지력의 관계 및 신체적 변수와의 관계를 조사해 보고자 하였다. 환자를 대상으로 하기에 앞서, 정상인 젊은 남성을 대상으로 시행하였다. 실험을 위해 투명 아크릴 레진 판을 이용하여 폭(27-36 mm)과 두께(8, 10 mm)를 달리한 20 가지 크기의 혀유지구를 제작하고 준비하였다. 코골이와 수면무호흡증이 없는 36명의 젊은 남성 지원자들(평균연령: $24.47{\pm}2.58$세)을 대상으로 다양한 크기의 혀 유지구를 장착하여 유지력을 측정하여 최대유지력을 보이는 혀 유지구를 그 환자에게 적합한 크기의 유지구로 결정하고 측정한 값들을 기록하였다. 측정은 앉은 자세와 누운 자세에서 각각 시행하였다. 실험 결과, 앉은 자세와 누운 자세 모두에서 혀 유지구 크기에 따라 분류한 네 군의 유지력 사이에는 통계적으로 유의한 차이가 있었다 (p<0.05). 즉, 피검자에게 가장 적합한 크기의 유지구로 조사한 결과 유지구의 크기가 증가할수록 유지력이 증가하는 양상을 보였다. 신체적 변수와 혀 유지구 크기 사이의 관련성은 뚜렷하게 관찰되지 않았으며, 측정 자세에 따른 유지력 간에도 유의한 차이는 없었다. 본 연구의 결과는 혀 유지구의 유지력은 유지구의 크기, 즉 혀의 부피와 관련이 있음을 보여준다.

화물선 소화설비 비치에 대한 연구 (A study on the location of fire fighting appliances in cargo ships)

  • 하원재
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제40권9호
    • /
    • pp.852-858
    • /
    • 2016
  • 화물선 거주구역을 화재로부터 보호하기 위하여 SOLAS에서는 방화구조기준을 도입하여 화염과 연기의 전파속도를 늦출 수 있도록 규정하고 있으며 또한 선원들의 소화훈련을 강제화하고 있다. 이 규정은 선체구조 및 설비에 관한 규정과 인적요소에 관한 규정의 조합으로 화재예방과 화재발생시 효과적인 대응을 하고자 하는 것이다. 인적요소에 관한 규정은 선체구조 및 설비에 관한 규정의 보조적인 규정으로 볼 수 있으며, 현행의 선체구조 및 설비로는 거주구역 화재를 완벽하게 소화할 수 없기 때문에 선원에 의한 소화작업이 필요하며 이에 따른 인적과실을 줄이고 효과적으로 소화작업을 할 수 있도록 소화시스템의 구비와 소화절차의 개선이 필요하다. 소화작업의 기본은 화재가 확산되기 전에 소화준비를 마치고 실제 소화작업을 시작하여야 하는 것이다. 소화작업을 신속히 준비하기 위해서는 소화설비를 가능한 신속하게 이용할 수 있는 장소로 재배치하는 것이 중요하다. 이 연구는 거주구역 내의 화재제어장소를 개방갑판에서 접근할 수 있도록 위치를 변경하고, 이곳에 소방원장구 2조를 같이 비치함으로써 화재시 선원들이 신속하게 소방원장구를 반출할 수 있고 동시에 화재제어장소 내의 화재시스템들을 작동하도록 하여 거주구역에 재진입하는 위험을 제거하여 인적위험을 감소시키고자 하는 것이다. 또한 거주구역의 보호를 위하여 채택하고 있는 보호방식 중 유일하게 직접적인 소화를 할 수 있는 IIC방식을 강제화하여 선원들의 소화작업 중 발생할 수 있는 위험을 줄이고 화재 초기에 화재를 진압할 수 있도록 SOLAS 및 관련 국내법령의 개정을 제언하기 위한 기초연구로 수행되었다.

설비공학 분야의 최근 연구 동향 : 2013년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2013)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제26권12호
    • /
    • pp.605-619
    • /
    • 2014
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

백서에서 실험적 치아이동시 임신이 치조골 교체(Turnover)에 미치는 영향에 대한 연구 (The effects of pregnancy on alveolar bone turnover during experimental tooth movement in rats)

  • 김영선;이기수
    • 대한치과교정학회지
    • /
    • 제30권4호
    • /
    • pp.413-421
    • /
    • 2000
  • 임신중 전신의 호르몬 변화는 골대사과정에 영향을 주고 임신 중에는 골교체가 증가하며, 교정력에 의한 치아이동에는 치조골 교체가 수반된다고 알려져 있다. 이 연구는 임신으로 인한 전신의 호르몬 변화가 치아이동 중 치조골 교체에 주는 영향을 알아보기 위하여 시행되었다. 생후 10주령의 암컷 백서 60마리를 대상으로 정상군과 정상-치아이동군, 임신-치아이동군의 3군으로 나누고 치아이동일수에 따라 1,3,7,14일군으로 세분한 후 상악 제1대구치 에 40g의 교정력을 가하여 근심측으로 치아이동을 시행하였다. 치아이동 전후에 촬영한 X-ray사진을 계측하여 치아이동 거리를 비교하고 치조골에서의 alkaline phosphatase, tartrate-resistant acid phosphatase 농도를 측정하여 치아이동에 따른 골형성과 흡수 활성을 비교하여 다음과 같은 결과를 얻었다. 1. 치아이동량은 임신-치아이동군이 정상-치아이동군에 비하여 더 크게 나타났다(p<0.01). 2. 정상-치아이동군의 치아이동에 따른 골형성은 대조군과 차이가 없었지만 골흡수 경향은 증가되었고(p<0.01), 정상-치아이동군에서는 대조군에 비하여 치조골의 형성과 흡수 활성이 모두 치아이동 7일에 가장 크게 증가하였고 (p<0.01) 이후 골형성 활성은 감소하였지만(p<0.05) 골흡수 활성은 대조군보다 높게 유지되었다(p<0.01). 3. 임신군과 정상군의 치아이동에 따른 골형성과 흡수 경향에는 차이가 없었지만, 임신-치아이동군의 치조골 형성 (p<0.01)과 흡수(p<0.05) 활성의 증가는 3일경에 가장 높게 나타났으며, 이후 골형성 활성은 감소하였으나 골흡수 활성은 높게 유지되었고, 정상-치아이동군은 7일경에 치조골 형성과 흡수 활성의 증가가 나타났다. 임신중의 치아이동량이 정상 치아이동에 비하여 크게 나타났으며, 치조골 흡수와 형성 활성의 증가가 빠르게 나타났고 치조골 흡수가 더 오랬동안 지속되어 빠른 치조골 교체를 보이므로 임신상태에서 치 아이동은 정상상태보다 촉진될 가능성이 있음을 시사한다.

  • PDF

원자력산업 중견전문인력 양성을 위한 전문대학 교육과정 개발 (College-bound Curriculum Developement for Training of Atomic Industry Technician)

  • 유광열;김성수;안성민
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제28권1호
    • /
    • pp.33-44
    • /
    • 2005
  • 국내 원자력 방사선 산업의 높은 성장과 전문 인력 수요의 증가는 기술 발전 단계관점에서 기술 공학자 혹은 중간기술자의 수요 확대를 가져왔다. 그러나 원자력 방사선 기술의 발전과 이용에 비해 전문인력 양성 교육기관은 빈약한 실정이다. 산업체에서 가장 필요로 하는 인력은 초중급 기술인력으로 이들을 양성할 교육기관이 필요하며 이들의 교육 수요를 만족시켜줄 가장 유리한 교육기관은 전문대학이라 하겠다. 따라서 현재 의료분야로 편중된 우리나라의 전문대학방사선과 교육과정을 산업체에서도 필요로 하는 교육과정을 개발하고자 한다. 연구개발의 내용과 그 범위는 크게 4가지로 구분하여 연구를 수행하였다. 첫 번째, 교육과정 시행의 대상인 방사선 산업체 관련 인력환경 기초 조사를 시행하였으며, 이를 위해 세부 시행 업무로서 국내의 방사선 산업체 종사자, 전문대학 방사선과 재학생과 교수를 대상으로 설문조사 및 분석을 하였다. 두 번째, 교육과정 개발에 필요한 기초 자료로서 국내외 방사선 관련 대학들의 사례를 통해 교육과정을 분석하였다. 또 이를 위해 국내, 일본, 미국의 방사선 관련 대학의 교육과정을 조사 및 분석하였다. 세 번째, 방사선 산업에 필요한 기초 과학 교과목과 방사선 전공 교과목을 개발하였다. 이 과정에서는 미국과 한국의 공학교육 인증원에서 제안하고 있는 원자력, 방사선 관련 교육 프로그램 지침을 참고로 하였다. 네 번째로 정규 교육과정에 필요한 교과목 즉 선택형 교과목을 개발하였는데, 여기에는 교과목 운영에 필요한 교육과정 개발과 정규 교육과정 이외의 심화과정 및 부전공제 운영 모델의 개발이 포함되었다. 연구의 핵심 결과는 방사선 산업체 업무 분야에 적합한 선택형 세부 교육과정을 제안하였는데, 각 대학의 특성과 교육 목표에 따라 달라질 수 있다. 첫 번째는 업무분야별 세부교육과정으로, 방사선 이용분야에 적합한 교과목과 방사선 안전관리 분야에 적합한 교과목을, 두 번째로 업체 유형별 세부교육과정으로 제조업체에 필요한 교과목, 비파괴검사업체에서 필요한 교과목, 판매기관에서 필요한 교과목, 그리고 연구소에서 필요한 교과목을 선정하였다. 또한 이러한 교과목을 시행하기 위하여 교과과정 2가지 운영 모델을 제안하였는데, 첫째는 현재 전문대학 방사선과 3년 과정에서 의료분야 전공과 산업분야전공 별로 전공제를 실시하는 방법과 둘째로, 전문대학을 졸업 후 심화과정(1년 과정)에서 산업방사선을 전공하도록 하는 방법이다. 운영모델을 좀더 효과적으로 운영하기 위해서는 보다 심도 있는 학제 연구와 더불어 교재의 개발이 전제되어야 하며, 교과운영에 필요한 교수인력, 실습공간, 기자재 등의 재정의 확보 역시 해결되어야 할 문제이다.

  • PDF

Ortho-phenylphenol을 주성분을 하는 훈증소독제의 Pseudomonas aeruginosa와 Enterococcus hirae에 대한 살균효과 (Bactericidal Efficacy of a Fumigation Disinfectant with Ortho-phenylphenol as an Active Ingredient Against Pseudomonas Aeruginosa and Enterococcus Hirae)

  • 차춘남;박은기;김용팔;유은아;유창열;홍일화;김석;이후장
    • 한국식품위생안전성학회지
    • /
    • 제29권1호
    • /
    • pp.60-66
    • /
    • 2014
  • 본 연구는 P. aeruginosa와 E. hirae을 대상으로 ortho-phenylphenol 20%를 함유한 훈증소독제, Fumagari $OPP^{(R)}$의 살균효과를 평가하기 위해 수행되었다. 예비 시험에서, P. aeruginosa와 E. hirae의 현탁액 균수는 각각 $2.8{\times}10^8$$3.6{\times}10^8CFU/mL$이었으며, 모든 훈증소독제에 노출시킨 담체의 균수는 모두 평판배지법과 여과법으로 배양한 시험균주 현탁액의 균수의 50%보다 많았다. 또한, 대조 담체로부터 회복된 P. aeruginosa와 E. hirae 균수는 각각 $2.9{\times}10^6$$2.7{\times}10^6CFU/mL$이었다. 훈증소독제의 살균효과 시험에서는, 훈증소독제를 처리한 담체의 P. aeruginosa와 E. hirae의 감소 균수는 각각 6.46와 5.19 logCFU/mL로 나타났다. 이상의 결과로부터, 훈증소독제, Fumagari $OPP^{(R)}$는 P. aeruginosa와 E. hirae에 대해 효과적인 살균력을 갖는 것으로 확인되었으며, 병원성 세균에 오염된 식품재료 및 주방용품의 소독에 적용할 수 있을 것으로 사료된다.

독거노인을 위한 융복합 실내 보온용 텐트디자인에 관한 연구 (A study on Indoor Insulating Tent Design for Senior Citizens who Live Alone)

  • 이대현;김상식
    • 한국과학예술포럼
    • /
    • 제37권2호
    • /
    • pp.219-230
    • /
    • 2019
  • 통계청에 따르면 2017년 기준으로 국내 65세 이상 노인 인구는 700만명을 돌파하였고 이중 독거노인의 수는 130만 명을 넘어섰다고 하였다. 독거노인들은 대부분 절대적 빈곤(68.5%가 월 소득 50만원 미만)으로 우리사회의 사각지대에 놓여져 있는 상황에서 기본적인 생활에 곤란을 겪고 있는 실정이다. 특히 겨울철 취약계층의 독거노인들의 난방은 심각하며 그나마 전기난로나 전기장판 등 전기 안전용품 취급 부주의로 화재사고도 빈번하게 일어나고 있는 실정이다. 실내용 텐트제품들이 독거노인들에게서 이용되어지고 있는 가장 큰 이유로는 에너지 절감과 따뜻한 수면, 화재 안전 등으로 나타났다. 이러한 실내용 텐트의 시장 확대에 따라 본 연구의 목적은 저소득 독거노인에게 적합한 실내용 텐트가 필요하다고 판단하였고, 그에 따른 이용성, 휴식, 보관 등의 효율성을 개선시키는데 목표를 두었다. 따라서 본 논문은 기존 브랜드의 제품들에서 기초 조사를 하여 장·단점을 분석하여 기존 판매 되고 있는 제품에서 소비자들이 원하는 요구를 파악할 수 있었다. 이어 디자인모델을 통한 소비자선호도 조사를 실시하여 설치편리성, 공간 활용성, 외관디자인 측면에서 가장 우수한 Zabara type을 선정하였다. 선정 결과를 토대로 제품디자인 제작 및 최종 프로토타입을 완성하였다. 연구 결과 및 내용은 다음과 같다. 첫째, 실 사용자의 사용성 조사와 인터뷰를 통해 제품 개발 시 미처 인지하지 못했던 요소를 파악할 수 있었다. 둘째, 프로토타입의 효과적인 부분에서는 기대 이상으로 고령자들이 쉽게 그리고 빠르게 설치 및 접을 수 있었다. 이러한 연구 결과를 바탕으로써 향후 독거노인 뿐만 아니라 다양한 사용자가 실내에서 또 하나의 편안한 개인공간으로써 활용될 수 있을 것으로 기대한다.