• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.21-29
• /
• 2003

Recent developments in software technology have made it possible to create a virtual three-dimensional model of the dental arches from digitally scanned casts of a patient's dentition. This modelmay then be manipulated with software to produce stages of tooth movement from the initial malocclusion to the final desired occlusion. A sterolithograghic model is made for each stage of tooth movement which is the basis for construction of a series of clear and thin overlay appliances. These appliances are worn full time by the patient to move the teeth according to the programmed stages of movement. Malocclusions involving mild to moderate crowding and space closure have been proven to be successfully treated with this appliance. Experience with this appliance has demonstrated excellent patient compliance with less discomfort, improved esthetics and oral hygiene control, when compared with fixed orthodontic appliances. Orthodontic treatment with this appliance is a potentially useful alternative approach to fixed appliances for treatment of a variety of malocclusions in patients with fully erupted permanent teeth.

• The Journal of the Korea Contents Association
• /
• v.14 no.5
• /
• pp.281-288
• /
• 2014

This study has surveyed patient education and counseling, based on the data you want to utilize the expectations on dental prosthetic appliances (denture, bridge) and implants among 307 workers who participated in reservists mobilization training of Hyundai Heavy Industries located in Ulsan City. The reliability of expectations on dental prosthetic appliances and implants were fairly high at cronbach'${\alpha}$ of .971 and .967 respectively. The collected data was analyzed through IBM SPSS Statistics. v. 19.0 program at the significance level of 0.05. The research findings are as follows. First, the expectations on prosthetic appliances scored an average of 3.98. Second, the expectations on implants scored an average of 3.74. Third, the expectations on implants depending on subjective health status scored an average of 3.74, which were statistically significant (p=0.003). Fourth, the differences in expectations on implants depending on the concerns for oral hygiene care scored an average of 3.74, which were statistically significant (0<0.001). Fifth, the expectations on prosthetic appliances and implants were strongly correlated at 0.392. As a result of implants of prosthodontics need for accurate information transfer.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.201-210
• /
• 2005

In order to develop a more useful and ergonomically attractive remote controller, I peformed experiments with various subjects to define factors that may obstruct the usability of remote controllers for multifunction A/V appliances. I also performed the experiments to evaluate other factors that were created to improve the usability of them, and showed that remote controllers with the improved factors are more efficient and more attractive to use. I analyzed about 40 types of remote controllers for various A/V appliances to understand impediment factors of usability. By this analysis I found the factors that affected the usability of them, and developed three types of improved remote controllers for the next version of $Play@TV^{TM}$ also set the subjects with the task of usability tests with an existing remote controller and the three newly chosen remote controllers, and those results were analyzed qualitatively and quantitatively. The results showed that the 'B type' remote controller took less time to perform the same tasks by 9.2% than the existing remote controller. I concluded that the usability factors of remote controllers - function receptivity, presentation of a tactile clue, reasonable size and weight, how to arrange the main buttons, grouping of related functions - will be useful and effective to improve the usability of A/V appliances.

• Health Policy and Management
• /
• v.28 no.2
• /
• pp.145-150
• /
• 2018

Background: The aim of this study was to investigate the current state of the assistive devices and appliances provision system for cerebral palsy patients registered with brain disability. Methods: From 2003 to 2013, we analyzed the records of cerebral palsy patients who had assistive devices and appliances provisioned at least once in their lives based on National Health Information Database. Patients with cerebral palsy were divided into three groups: infants and toddlers, school age and adolescence, and adults. Results: Data on short leg plastic orthoses, ankle joint orthoses, and wheelchair were mainly analyzed. The types of ankle joint orthoses divided into three categories: limited, $90^{\circ}$ limited, and Klenzac. Limited ankle joint orthoses was most frequently supported of the three in all age groups. Powered wheelchair and scooter were most supported to adult patients. When the re-supply duration was evaluated, the duration was suitable to the duration on guideline of regulation of re-supplement according to the related laws in adult patients but not in infants/toddlers and school age/adolescence as the actual re-supplement duration was much shorter than the reference value. Conclusion: This study confirmed the pattern of assistive devices and appliances supply differed depending on the age of cerebral palsy patients.

• Journal of the Korean Home Economics Association
• /
• v.46 no.4
• /
• pp.83-96
• /
• 2008

The purpose of this study is to grasp the opinion of Korean feminine seniors on the life support appliances for their healthy ageing: medication dispenser, video phone, activity monitor and sleep monitor. The focus group interviews, asking the usability of the appliances, were answered by each 6 feminine seniors of more than 65 years, residing in Corvallis of U.S.(group I), Cheongju(group II), and Ulsan(group III) of Korea. The results are as follows. (1) The medication dispenser proved to be very useful to all the respondents. All the seniors, who take more than one medicine a day, felt it helpful that the medication dispenser makes them to take medicines at fixed time. In addition, they hoped the medicine envelope to be developed for the dispenser use by the supply side. (2) The seniors showed interest in the manner the video phone works; to work by the voice, rather than by the finger. They expressed the hope of the video phone to display the communication contents, in consideration of their weakening hearing. (3) The seniors who live alone, especially, felt intimacy to the activity monitor, thinking as if some helpers were beside them. The fact that it can send emergency calls immediately when situations happen, gave the seniors emotional safety as a patron. (4) The sleep monitor, although essential to the serious cases without moving ability, was proved less necessary to the healthy seniors. They expressed the hope of this appliance to be evolved for the use with the mattress without bed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.4
• /
• pp.439-444
• /
• 2011

To determine the test gases for gas appliances of new gas group, the interrelation between gas interchangeability, including thermal efficiency, of 13A gas appliances and present 13A test gases was experimentally investigated. The test results show that the Wobbe indices in the case of incomplete combustion and the flame lifting limit gas for the new gas group are respectively 2% higher than the upper limit and 1% lower than the lower limit of the Wobbe index range. The most suitable composition of R gas is 96 mol% of methane and 4 mol% of propane; LNG could be also used as R gas. Further, analysis results showed that the hydrogen concentration of flash back limit gas could be lowered from 30 vol% to 23 vol%.

• Fashion & Textile Research Journal
• /
• v.22 no.2
• /
• pp.240-249
• /
• 2020

This study reviews studies that used skin temperature in order to establish an emotion evaluation protocol based on skin temperature for home appliances. A survey of skin temperature evaluation papers was conducted by the following five stages: (1) keyword search, (2) title screening, (3) abstract screening, (4) full paper screening, and (5) relevance evaluation. Selected papers were reviewed for: purpose, recruitment criteria of participants, the number of participants, apparatus, procedure, measures, analysis methods, and major findings. Thermistor sensors and thermography are used for the measurement of skin temperature. Skin temperature sensors are attached to 4 - 10 locations on the body and their mean of skin temperature is calculated by Ramanatan's 4-point or Hardy & Dubois's 7-point method. Semantic differential (SD) method and thermography measuring facial surface temperature have been used for emotion evaluation. The SD method provides a set of adjective pairs related to a product and evaluates changes in emotion from the use of the product. The range of facial surface analyzed is defined in the thermal image and temperature changes before and after the evaluation are analyzed. The evaluation items of home appliances include form, color, material, aesthetics, satisfaction, novelty, convenience, pleasantness, and excellence. Many existing emotion studies using skin temperature do not apply physiological and psychological methods. This study provides basic data to establish a skin temperature and emotion evaluation protocol by examining literature for skin temperature and evaluation of sensitivity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1057-1069
• /
• 2017

The applications of Wireless Sensor Networks (WSN) are progressively adopting for various smart home services such as home automation, controlling smart home household appliances, constrained application services in a smart home, etc. However, enabling a seamless and ubiquitous WSN communication between the smart home appliances is still a challenging job. Therefore, in this paper, we propose a smart home control system using an Actuator based ZigBee networking (AZNET). The working of the proposed system is further divided into three phases, 1) an interference avoidance system is adopted to mitigate the effect of interference caused due to the co-existence of IEEE 802.11x based wireless local area networks (WLAN) and WSN, 2) a sensor-based smart light control system is used to fulfill the light requirement in the smart home using the sunlight with light source, and 3) an autonomous home management system is used to regulate the usage time of the electronic appliances in the smart home. The smart is tested in real time environment to use the sunlight with light sources in a various time of the day. Similarly, the performance of the proposed smart home is verified through simulation using C# programming language. The results and analysis revealed that the proposed smart home is less affected by the interference and efficient in reducing the energy consumption of the appliances available in the smart home scenario.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.2
• /
• pp.172-179
• /
• 2006

This study developed a program for detecting charged refrigerant amount in system air-conditioner. System air-conditioner is an air-conditioning system with multiple indoor units. Due to the complexity of the system, it is more difficult to detect the refrigerant amount charged in the system air-conditioner than in a general single air-conditioner. Experiments were performed for a 6 HP outdoor unit with 3 indoor units in a psychrometric calorimeter. The experimental amount of the charged refrigerant was ranged from $60\%\;to\;140\%\;with\;10\%$ increasement. Fuzzy algorithm was employed for detecting the charged refrigerant amount in the system air-conditioner. The experimental data were used for curve-fitting for the general ranges of indoor and outdoor temperature conditions. Membership function was determined for the whole ranges of experimentally measured data and rule-bases were defined for each charged refrigerant amount. Developed program successfully predicted the measured data within $10\%$ resolution range.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.3
• /
• pp.539-544
• /
• 1998

Thermoformed appliance, which has been recently introduced for dental usage, is an appliance made of thermoformed sheets and formed with positive or negative pressure under heat. Thermoplastic material is a kind of plastics and can be repeatedly softened by heat. It is classified into hard elastic foil, hard/soft compound foil and soft elastic foil, including BIOPLAST, BIOCRYL, IMPRELON, etc. It has been developed in 1969 and is available in various thickness, shape and color. There are two types of Vacuum former for thermoplastic materials; the pressure type and suction type. The former is much better than the latter for fabrication of various appliances due to its higher pressure. The authors have applied these appliances to some cases - chin cap, active retainer, individual Fluoride tray, mouth protector, bracket transfer mask, bruxism splint(night guard), Essix appliance - by pressure type Vacuum former($Biostar^{(R)}$). The thermoplastic appliances have numerous advantages such as simple procedure, short working time, clean and transparent product, less objectionable taste. But its outstanding advantage would be its excellent biocompatibility bacause it has no monomer and hence no tissue irritation. Although there is some limitations in its usage, it can be used widely for various purposes especaily for pediatric dentistry.