• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.176-183
• /
• 2012

Purpose: This study examined the clinical success rate of Mg titanate implants (M Implant system, Shinhung, Korea), which employ a Mg coating method, by evaluating the marginal bone loss and implant stability using radiographs and Osstell$^{(R)}$, over a 1 year. Materials and methods: The locations of the implants placement were divided into 4 areas; the maxillary and mandibular premolars and molars. In the maxilla, 8 and 9 implants were inserted in the premolar and molar areas, respectively. In the mandible, 11 and 51 implants were inserted in the premolar and molar areas. Marginal bone loss and ISQ of all implants (79) were measured after insertion, mounting the prosthetic appliance, and 1, 3, 6, and 12 months after loading. The marginal bone loss was measured from the radiograph using XCP bite, which was customized, and the implant stability measured using Osstell$^{(R)}$. Fisher's exact test (${\alpha}$=.05) was used to compare the success rates of each region. Results: The mean marginal bone loss for the upper and lower jaws were 1.537 mm and 1.172 mm. The mobility showed a non-significant reduction or increase according with time. The success rates were accounted for 94.12% and 98.39% in the upper and lower jaws; the premolars and molars were accounted for 100% and 96.67%. The two cases of early failure resulted from failure of primary stability during implant insertion. The late failures were not observed for 1 year after adding a loading to the implants. Conclusion: The Mg titanate implant showed good primary stability and good clinical results in both healing and function.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2002.11a
• /
• pp.363-369
• /
• 2002

가정 내에서의 초고속망 이용이 활성화되면서 가정 내에서의 활동은 매우 다양하고 복잡하며 그에 따른 서비스도 여러 가지 형태가 존재한다. 외부 인터넷망과 연동되는 홈 네트워크의 개념이 생기기 전부터 흠 오토메이션, 홈시큐리티 등의 서비스를 제공하기 위한 고립적인 형태의 망과 서비스 제공 시스템이 있었다. 월드 와이드 웹 서비스를 기본으로 한 인터넷의 폭발적인 활성화와 고속 인터넷망의 확산에 따라 가정 내에서 제공되는 서비스를 인터넷과 연계시키려는 시도가 보편화되었고 가정 내에서 사용되는 독립적인 기기들을 인터넷에 연결하여, 외부의 정보를 이용해서 활용하거나, 가전내의 기기들을 외부에서 액세스할 수 있게 되었다. 이렇게 하여 보다 풍부한 서비스를 제공하고, 사용상의 시간적인 제약을 완화할 수 있다. 예들 들어 인터넷상에서 조리법을 전송받아 전자레인지를 작동할 수 있으며, 외부에서 잘못 켜둔 가스밸브를 잠글 수도 있다. 가정 내에서 wrhd되던 이러한 서비스들은 서로 다른 하드웨어와 통신방법을 사용하고 있어, 이러한 서비스를 통합하여 운영, 관리할 수 있도록 하는 흠 서버의 개념이 대두되었다. 외부 인터넷 망과 연계된 흠 오토메이션, 홈 시큐리티등을 제공할 수 있는 기반이 마련되었고, 가정 내에서 독립적으로 제공되던 서비스들을 단일 홈 서버를 통해서 관리하려는 시도가 진행되었다. 그러나 홈 서버는 개발하는 업체의 보유기술에 따라 중심기능은 약간씩 차이를 보이고 있다. 홈 서버 응용 영역은 전문 지식을 소유한 인력과의 연계가 필요하고, 다양한 서비스 영역 행위가 아주 복잡하기 때문에 이들을 연결해 주는 자치 시스템을 필요로 한다. 또한 홈 서버 서비스 영역에서 정보는 각 영역 전문가가 가진 지식의 전달을 필요로 하기 때문에, 지식을 주고받는 멀티 에이전트의 시스템의 활용 영역으로 적당하다. 멀티 에이전트 시스템은 분산된 환경에서 에이전트간에 에이전트 통신 언어를 사용해서 대화를 하기도 하고, 상호 협력하는 에이전트들로 구성된 시스템을 뜻하며 흠 서버처럼 동적이고 고도의 자치성을 요구하는 영역에 적당하다. 멀티 에이전트 플랫폼으로는 FIPA(Foundation for Intelligent Physical Agents)가 제시한 에이전트 표준 플랫폼이 1997년부터 2000년에 이르기까지, 계속적으로 변화, 발전하고 있다. 본 연구는 FIPA에서 제시하는 플랫폼을 기반으로 홈 서버에 정보가전을 제어하는 에이전트를 두고 외부에서 다른 에이전트가 홈 서버에 위치하는 에이전트와의 통신을 통하기 정보가전을 지능적으로 제어하도록 하였다. 정보가전 에이전트는 가정 내 가전제품을 외부에서 제어하기 위한 에이전트이다. 단순한 관리가 아닌 에이전트로 하여금 지능적으로 가전제품 관리를 하게 한다. 정보가전 에이전트는 홈 서버에서 작동하는 에이전트와 PDA에서 작동하는 에이전트로 구성된다. 정보가전 에이전트는 전력량, 수도 사용량 제어와 가전제품 제어 기능과 보안 관련 서비스를 제공한다. 두 에이전트는 FIPA에서 정의된 규격에 맞게 만들어지기 때문에 FIPA명세서를 따르는 다른 에이전트와 자유로운 통신이 가능하다.

• Environmental and Resource Economics Review
• /
• v.24 no.3
• /
• pp.463-488
• /
• 2015

A more detailed design of offset system is needed according to the emission trading system started in 2015. This study aims to estimate the supply of potential offset that can be secured by expanding high-efficiency household electric appliances. The target commodities for analysis are three different householding electric appliances: TV, washing machine, electric fan, refrigerator and air conditioner. By using the ARDL model, we estimated the coefficients of diffusion of these high-efficiency appliances from 2016 to 2022. Then, the potential supply of offset was drawn by calculating the amount of electricity saving by efficiency improvement and by applying the rates of carbon exchange. Supposing that the electricity savings rates of high-efficiency appliances are each 10% and 20%, the accumulated carbon decrement in 2022 was respectively $361,899CO_2t$ and $723,797CO_2t$. The appliance that showed the biggest carbon decrement was air conditioner, and the second biggest was refrigerator and the next was TV, followed by washing machine, electric fan.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.4
• /
• pp.393-409
• /
• 2003

In this paper, we present a multi-task debugging environment for Qplus-T embedded-system such as internet information appliances. We will propose the structure and functions of a remote multi-task debugging environment supporting environment effective ross-development. And, we are going enhance the communication architecture between the host and target system to provide more efficient cross-development environment. The remote development toolset called Q+Esto consists to several independent support tools: an interactive shell, a remote debugger, a resource monitor, a target manager and a debug agent. Excepting a debug agent, all these support tools reside on the host systems. Using the remote multi-task debugger on the host, the developer can spawn and debug tasks on the target run-time system. It can also be attached to already-running tasks spawned from the application or from interactive shell. Application code can be viewed as C/C++ source, or as assembly-level code. It incorporates a variety of display windows for source, registers, local/global variables, stack frame, memory, event traces and so on. The target manager implements common functions that are shared by Q+Esto tools, e.g., the host-target communication, object file loading, and management of target-resident host tool´s memory pool and target system´s symbol-table, and so on. These functions are called OPEn C APIs and they greatly improve the extensibility of the Q+Esto Toolset. The Q+Esto target manager is responsible for communicating between host and target system. Also, there exist a counterpart on the target system communicating with the host target manager, which is called debug agent. Debug agent is a daemon task on real-time operating systems in the target system. It gets debugging requests from the host tools including debugger via target manager, interprets the requests, executes them and sends the results to the host.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.341-348
• /
• 1996

The efficiency of maxillary canine retraction by means of sliding mechanics along an 0.016 continuous labial arch and an 0.009 inch in diameter with a lumen of 0.030 inch NiTi closed coil spring was compared with that using the same NiTi closed coil spring and Molar Anchoring Spring(MAS) which was designed by author. MAS was made of .017" X .025" TMA wire and was given 60 degree tip-back bend on the wire close to the molar tube. This study was designed to investigate molar and canine root control during retraction into an extraction site with continuous arch wire system. Two techniques were tested with a continuous arch model embedded in a photoelastic resin. A photoelastic model was employed to visualize the effects of forces applied to canine and molar by two retraction mechanics. With the aid of polarized light, stresses were viewed as colored fringes. The photoelastic overview of the upper right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows. 1. Higher concentration of compression can be seen clearly at the distal curvature of the canine and mesial curvature of the molar and premolar when NiTi closed coil spring was applied only, which means severe anchorage loss of the molar and uncontrolled tipping of the canine. 2. The least level compression was presented at the mesial root area of the molar and premolar, and mesial root area of the canine when NiTi closed coil spring and MAS were used simultaneously. Especially mesial alveolar crest region of the canine was shown moderate level of compression that means MAS can be used as a appliance for anchorage control and prevention of canine extrusion and uncontrolled tipping during canine retraction.

• Corrosion Science and Technology
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2013

Recently Digital TV industry has drastically been moving the illuminating system, which causes an obvious product change from PDP and LCD to LED model to provide high-definition image. Due to strong competition in the digital industry, TV manufacturers make a great efforts to reduce production cost by using low-priced materials such as steels instead of aluminum and plastic etc. In this paper we have developed a new low-priced electrogalvanized steel sheet, which has a black resin composite layer, to substitute conventional high-priced PCM steel and plastic mold for rear cover panel in the digital TV. The black resin composite was prepared by mechanical dispersion of the mixture solution that consists of high solid polyester resin, melamine hardener, black pigment, micronized silica paste, polyacrylate texturing particle and miscellaneous additives. The composite solution was coated on the steel sheet using roll coater followed by induction furnace curing and cooling. Although the coated layer has a half thickness compared to the conventional PCM steels having $23{\mu}m$ thickness, it exhibits excellent quality for the usage of rear cover panel. The new steel sheet was applied to test products to get quality certification from worldwide electronic appliance customers. Detailed discussion provides in this paper including preparation of composite solution, roll coating technology, induction curing technology and quality evaluation from customers.

• The KIPS Transactions:PartD
• /
• v.13D no.1 s.104
• /
• pp.67-74
• /
• 2006

The security requirements identification in the software development has received some attention recently. However, previous methods do not provide clear method and process of security requirements identification. We propose a process that software developers can build application specific security requirements from state transition diagrams at the security threat location. The proposed process consists of building model and identifying application specific security requirements. The state transition diagram is constructed through subprocesses i) the identification of security threat locations using security failure data based on the point that attackers exploit software vulnerabilities and attack system assets, ii) the construction of a state transition diagram which is usable to protect, mitigate, and remove vulnerabilities of security threat locations. The identification Process of application specific security requirements consist of i) the analysis of the functional requirements of the software, which are decomposed into a DFD(Data Flow Diagram; the identification of the security threat location; and the appliance of the corresponding state transition diagram into the security threat locations, ii) the construction of the application specific state transition diagram, iii) the construction of security requirements based on the rule of the identification of security requirements. The proposed method is helpful to identify the security requirements easily at an early phase of software development.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.631-633
• /
• 2004

본 논문에서는 유비쿼터스 홈 네트워킹 환경에서 사용자의 위치 이동을 실시간 추적하고 가정 내 주거 활동의 편의를 제공하는 정보가전기기들을 제어할 수 있는 능동형 홈 서비스 시스템을 제안한다. 본 시스템은 다계층의 분산시스템 환경으로 구성된다. 즉, 물리 센서와 정보가전기기 등이 존재하는 물리층과 유/무선 지원 인터넷/인트라넷 통신 플랫폼을 포함하는 시스템층, 그리고 물리적 장치들로부터 시스템층을 통해 들어오는 정보를 처리하는 응용층으로 구성되며 실 생활 공간 및 시간을 응용 시뮬레이션 환경으로 반영시킨다. 능동형 홈 서비스 시스템의 개발 목적은 실버아파트에서 독거노인의 위치기반 건강관리 정보 서비스 및 아파트 내 정보가전기기들의 맞춤형 제어를 제공하기 위함이다. 이와 같은 시스템을 구축하기 위해서는 홈 네트워크 내에서 사용자의 이동 위치를 파악하는 실시간 위치추적 기술과 정보가전기기들의 동작을 실시간 제어하기 위한 기술이 요구된다. 제안한 시스템에서는 UC at Irine의 DREAM Lab.에서 개발한 TMO(Time-triggered Message -triggered Objecl) 스킴을 적용하여 각 물리 센서와 정보가전기기들을 응용의 구성요소로 개발했다. 이를 통해 가정 내에 이동하는 TMO로 매핑된 이동객체를 추적하고 또한 홍 네트워크로 연결된 정보가전기기들을 정보가전 TMO 동작객체로 매핑하여 이들 사이의 능동적인 상호동작을 통해 맞춤형 서비스 및 실시간 제어가 가능하도록 했다. 마지막으로, 실시간 위치추적 및 정보가전제어 응용 시뮬레이션을 통해 능동형 홈 서비스 시스템을 구성하는 개별 동작객체들의 기능성과 수행성을 검증했다.황에 대하여 소개한다.이스는 실험정보가 저장된 데이터베이스, 분석결과가 저장된 데이터베이스, 그리고 유전자 정보 탐색을 위한 데이터베이스로 분류해 데이터를 효율적으로 관리할 수 있게 하였다. 본 시스템은 LiNUX를 운영체계로 하고 데이터베이스는 MYSQL로 하여 JSP, Perl. 통계처리 언어인 R로 구현되었다.프트웨어를 사용하지 않고도 국내의 순수 솔루션인 리눅스 기반의 LonWare 3.0 다중 바인딩 기능을 통해 저 비용으로 홈 네트워크 구성 관리 서버 시스템 개발에 대한 비용을 줄일 수 있다. 기대된다.e 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.77-87
• /
• 2010

Skeletodental asymmetries are common and asymmetric orthodontic treatments are very difficult to correct successfully. The cause of asymmetries can be the skeletal asymmetry, dental, or functional, or combinations of these causes. Skeletodental asymmetries can be the result of congenital factors, such as hemifacial microsomia and environmental factors, such as trauma. Optimal treatment outcome of the severe facial asymmetry requires the orthognathic surgery. Mild asymmetry problem can be treated by only orthodontic treatment. The orthodontic treatment of asymmetry is usually difficult. Facial asymmetry orthodontic treatment are primarily based on proper diagnosis and careful treatment planning. Side effects of asymmetric elastic to treat midline discrepancies are canted occlusal plane, tipped incisors and unesthetic results. In the management of dental arch asymmetries, the clinician should select the appropriate force system and the appliance design necessary to address the asymmetry while minimizing undesirable side effects. This report presents treatment strategies for the treatment of skeletodental asymmetry. In this case report, the clinical case with midline discrepancies treated by optimal mechanics is described. Through diagnosis and strategic treatment mechanics can obtain proper midline correction with minimal side effects.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.93-103
• /
• 2006

Network solutions for protecting against worm attacks that complement partial end system patch deployment is a pressing problem. In the content-based worm filtering, the challenges focus on the detection accuracy and its performance enhancement problem. We present a worm filter architecture using the bloom filter for deployment at high-speed transit points on the Internet, including firewalls and gateways. Content-based packet filtering at multi-gigabit line rates, in general, is a challenging problem due to the signature explosion problem that curtails performance. We show that for worm malware, in particular, buffer overflow worms which comprise a large segment of recent outbreaks, scalable -- accurate, cut-through, and extensible -- filtering performance is feasible. We demonstrate the efficacy of the design by implementing it on an Intel IXP network processor platform with gigabit interfaces. We benchmark the worm filter network appliance on a suite of current/past worms, showing multi-gigabit line speed filtering prowess with minimal footprint on end-to-end network performance.