• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.990-998
• /
• 2008

In this paper we achieve experimental data evaluation using SSB(Single-side band) modulation in the ocean. Present research in underwater communication is applying digital modulation, OFDM and MIMO system. However, Commercial modems using analog modulation techniques in oceans. So, we achieved experimental for modem appliance development of correct high quality in South Korea sea characteristics. This experimets achievd useing SSB analog modulation in Jin-hae shore of shallow water condition. Used data are tonal and LFM signal for getting underwater channel characterisitcs and female Korean speech for speech communications.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.147-153
• /
• 2023

In recent times, an absence of effective crowd management has led to numerous stampede incidents in crowded places. A crucial component for enhancing on-site crowd management effectiveness is the utilization of crowd counting technology. Current approaches to analyzing congested scenes have evolved beyond simple crowd counting, which outputs the number of people in the targeted image to a density map. This development aligns with the demands of real-life applications, as the same number of people can exhibit vastly different crowd distributions. Therefore, solely counting the number of crowds is no longer sufficient. CSRNet stands out as one representative method within this advanced category of approaches. In this paper, we propose a crowd counting network which is adaptive to the change in the density of people in the scene, addressing the performance degradation issue observed in the existing CSRNet(Congested Scene Recognition Network) when there are changes in density. To overcome the weakness of the CSRNet, we introduce a system that takes input from the image's information and adjusts the output of CSRNet based on the features extracted from the image. This aims to improve the algorithm's adaptability to changes in density, supplementing the shortcomings identified in the original CSRNet.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.355-364
• /
• 2005

Ubiquitous environment can be supported by various service on networked appliance, sensors and devices. In home network and telematics, open service gateway is widely used for ubiquitous environment and Present environment for service installation, deployment and execution. Service gateway is a middle layer which is located between service and various devices in ubiquitous environment and offers a unique opportunity for pervasive computing as a potential framework for achieving interoperability between various sensors, home appliances. and networked devices. In ubiquitous environments, these services must support the mobility among service gateway because users and devices has a mobility characteristic. However the OSGi framework supports only a remote installation of a bundle, which is a unit that installs and deploys services. This paper develops a system that can manage bundles for supporting this dynamic bundle's mobility between service gateway. This system we are proposing implements a bundle form which can perform in an OSGi framework as well as manage the mobile services. As a result, mobility in a ubiquitous computing environment will be supported more efficiently.

• The Journal of Dong Guk Oriental Medicine
• /
• v.1
• /
• pp.1-13
• /
• 1992

Practical science means open and objective attitude as a new scholarly tone which gets out of Confucianism tradition and its closeness. It is concerned about practical aspect and its thought prevailed from the mid-16th century to the mid-19th century in feudal system. It is, also, the attitude seeking truth based on the facts, which is removed from the falsehood in politics, economics and social life. It is regarded as a social revolution which governs tile country economically and is utilized to stabilize and enrich a human living life. The new academic tradition appeared in the process of development of modernization proclaimed it to be utilized in modern-oriented independency. Modern historians have greatly studied the knowledge of early philosophy, while Korean oriental medicine has developed, basing on the cultivation of the mind, virtue, and benevolence through Han Bak-Keun(who showed much interest in realistic, economic and social system) and Jung Yak-Youg(who compiled all available data into one book). From Ko-Ryo dynasty to the mid-Yi dynasty Korean oriental medicine scholars struggled to develop oriental medicine in an attitude searching truth based on the facts. Among them Huh Jun's achievements and the content of his writings suggest any things with a view of practical science. These are neglected by most scholars so far, but I have surveyed as follows : 1) the revolution in oriental medical science system 2) the standardization of pharmacy appliance 3) the popularization of medicine supplies 4) cooperation of industry and academy in medical science field From the above I concluded as follows : practical science in Korean medical science began from Ko-Ryo dynasty and compiled in Ku Am Huh Jun in the period of King Sun-Jo of Li dynasty. With this repect, the pioneer in practical science in Korea is Ku Am Huh Jun. To search tile pioneer in practical science rightly we should study the history of Korean medical science.

• Journal of the Korean Magnetics Society
• /
• v.13 no.6
• /
• pp.251-256
• /
• 2003

We have developed the quality analysis system for magnetic field effect of cathode-ray tube that is used a monitor, TV and medical appliance. We designed and constructed the large 3-axis square coil (2 m length) system for the generation of 3-component magnetic field using power supply, magnetometer and computer below 0.2 mT range. The coil constant is 30.31 ${\mu}$T, 29.73 ${\mu}$T and 30.51 ${\mu}$T for the X, Y and Z axis square coil respectively. The magnetic field resolution was 0.01 T. The uniformity of magnetic field was measured within 1 ％ in the range of 12 cm.

• Journal of Technologic Dentistry
• /
• v.37 no.3
• /
• pp.169-178
• /
• 2015

Purpose: This study was to investigate usage satisfaction of multi type handpiece with equipped air-jet function Methods: The subjects of this study through the survey was conducted for fifty-nine dental technicians in Daegu and Gyeongsangbukdo from the May 7 to 19, after the June 23 to July 4 2014. The survey was about the function and quality through user testing environment by cutting zirconia specimens using appliance for zirconia. The collected date was analyzed by the statistical program SPSS Win Ver 19.0 for the satisfaction of handpiece and control system. To test for significance on each item, p<0.05 had been decided a standard. General characteristics and relationship between the handpiece and control system was performed correlation analysis. Results: The results of this study is as follows. 35 dental technicians had 1~2 years career in zirconia part as the highest 59.3%, 95% of subjects expected that the prospects for the zirconia material have bright prospects. The satisfaction of multi type handpiece and control system design and function showed a significant difference. Subjects satisfied with the design and function of the multi type showed negative correlation with those of Standard. The satisfaction of multi type handpiece showed 3.37 points of air jet, 3.05 points of noise level, 2.69 points of water flow rate, and 1.98 points of cruise function. Sample differences in all parameters showed a statistically higher difference. Conclusion: High-speed cutting mechanism of multi-type is recommended working with zirconia materials and the multi-type unit combined handpiece motor, air-turbine and air-gun will be expected the increase of user due to the high satisfaction of air jet.

• Convergence Security Journal
• /
• v.5 no.4
• /
• pp.27-32
• /
• 2005

Recently The social interest regarding is coming to be high about Home Network accordong to intelligence anger of diffusions and the family home appliance machineries and tools of the superhigh speed Internet In the ubiquitous computing socioty, only neither the threat of the private life which is caused by in cyber attack will be able to increase according to the computer environment dependence degree of the individual increases in the ubiquitous computing socioty, only neither the threat of the private life which is caused by in cyber attack will be able to increase according to the computer environment dependence degree of the individual increases Beacaues of Home network is starting point to go ubiquitous computing enviorment, The Increase of Cyber attack through Internet will raise its head with the obstacle to disrupt the activation of the groove network. So there is a possibility of saying that the counter-measure preparation is urgent, In the various environment like this, It means the threat which present time than is complicated will exist. So it will analyze the Home network system environment of present time and observe the Security threat and attack type in the ubiquitous computing enviorment. So it will analyze the Home network system environment of present time and observe the Security threat and attack type in the ubiquitous computing enviorment.

• The KIPS Transactions:PartB
• /
• v.14B no.3 s.113
• /
• pp.191-198
• /
• 2007

In this paper, we present a marker detection and recognition method from camera image for a disabled person to interact with a server system which can control appliance of surrounding environment. It converts the camera image to a binary image by using multi-threshold and extracts contours of objects in the binary image. After that, it approximates the contours to a list of line segments. It finds rectangular markers by using geometrical features which are extracted from the approximated line segments. It normalizes the shape of extracted markers into exact squares by using the warping technique. It extracts feature vectors from marker image by using principal component analysis and then recognizes the marker. The proposed marker recognition system is robust for light change by using multi-threshold. Also, it is robust for angular variation of camera by using warping technique and principal component analysis. Experimental results show that the proposed method achieves 100% recognition rate at maximum for 21 markers and execution speed of 12 frames/sec.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.183-190
• /
• 2004

This paper proposes a methodology to solve problems upon the circuit design applied to inductor load by applying a circuit to improve power factor with is partial switching PFC module to the power supply system for cooling/heating inverter air conditioner and by designing an input power section in compliance with IEC555-2 on the basis of better input power factor and minimized harmonic components of current. On the other hand, this paper suggested how to control the increase of output voltage along with tぉw current waves and partial switching PFC circuit as well, which can provide the output as twice as input voltage This study applied a method to control the compressors of air conditioner by means of increased the voltage applicable to compressor motor by lowering switching number conclusively, it could solve questions about efficiency, economics, electronic noise and so forth. and so that the reasonable voltage for running moor could be set up along with lower power consumption of air conditioner than estimated It was demonstrated that total sum of energy efficiency to operate system was increased to the extent of valid level. And all this merits and appropriateness was proved by computer simulation and experience.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.473-480
• /
• 2019

The smart home is a technology that can monitor and control by connecting everything to a communication network in various fields such as home appliances, energy consumers, and security devices. The Smart home is developing not only automatic control but also learning situation and user's taste and providing the result accordingly. This paper proposes a model that can provide a comfortable indoor environment control service for the user's characteristics by detecting the user's behavior as well as the automatic remote control service. The whole system consists of ESP 8266 with sensor and Wi-Fi, Firebase as a real-time database, and a smartphone application. This model is divided into functions such as learning mode when the home appliance is operated, learning control through learning results, and automatic ventilation using indoor and outdoor sensor values. The study used moving averages for temperature and humidity in the control of home appliances such as air conditioners, humidifiers and air purifiers. This system can provide higher quality service by analyzing and predicting user's characteristics through various machine learning and deep learning.