• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.368-371
• /
• 1995

This paper describes dynamic analysis and attitude control of a large spacecraft with flexible appendages in gravitational field. The effect of attitude control and vibration control of flexible appendages in gravitational field has been clarified. We demonstrate some simulations in gravitational field for some cases, and suggest the effects of gravitational torque, parameters of flexible appendages, attitude control and vibration control of flexible appendages.

• 해양환경안전학회지
• /
• 제24권2호
• /
• pp.267-274
• /
• 2018

연 근해어선들은 운항 또는 조업시 안정성(복원성능 및 횡동요 저감 성능)을 향상시키기 위해 여러 가지 부가물을 설치하며, 일반적으로 Fig. 1과 같이 세 가지로 분류할 수 있다. Bare hull을 포함하여 각 부가물이 단독으로 부착된 경우 3가지, 복수의 조합으로 부착된 경우 3가지 그리고 3가지 모두 부착된 1가지에 대하여 수치 계산을 수행하였다. Table 1은 Bare hull에 대한 주요치수를 나타낸 것이고, Table 2는 3가지 부가물에 대한 주요치수를 기술하였다. 3가지 선체 부가물에 대하여 CFD에 의한 유체동역학적 성능을 평가하였다. 각각의 부가물에 대하여 단독, 2개씩 조합된 복수 그리고 3개 모두 부착된 경우에 대하여 평가를 하였다. 1번 부가물의 경우 압력저항이 마찰저항보다 차지하는 비율이 큼을 알 수 있었다. 2번과 3번 부가물의 경우 압력저항과 마찰저항이 거의 대동소이 함을 알 수 있었다. 복수조합과 3가지 모두 부착된 경우 부가물 상호간의 상관관계는 매우 작음을 알 수 있었다. 11노트에서 2번 부가물과 모든 부가물이 부착된 경우 유효마력 관점에서 약 9 % 차이를 보였다.

• 대한조선학회논문집
• /
• 제51권2호
• /
• pp.154-161
• /
• 2014

Naval ships have hull appendages which are more exposed to the outside because of its small block coefficient compared with commercial ships. These exposed hull appendages like skeg, strut and shaft line affect the maneuverability of a ship. The effect of hull appendages has considered at initial design stage to estimate more accurate maneuverability. In this paper, sensitivity analysis is used to analyze the effect on maneuverability by hull appendages. 3 DOF maneuvering equations based on Mathematical Modelling Group (MMG) model are used and propeller & rudder model are modified to reflect the characteristics of twin propeller & twin rudder. Numerical maneuvering simulations (Turning test, Zig-zag test) for benchmark naval vessel, David Taylor Model Basin (DTMB) 5415 are performed. In every simulation, it is calculated that stability indices and maneuverability characteristics (Tactical Dia., Advance, 1st Overshoot, Time of complete cycle) with respect to the parameters (area times lift coefficient slope, attachment location) of hull appendages. As a result, two regression formulas are established. One is the relation of maneuverability characteristics and stability indices and the other is the relation of stability indices and hull appendages.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제1권1호
• /
• pp.50-56
• /
• 2009

The hydrodynamic effect of appendages for high-speed passenger vessels, such as Ro-Pax, Ro-Ro and cruiser vessels, is very severe and, therefore, it is essential to carry out the design of appendages for high-speed passenger vessels from the preliminary design stage to the final detail design stage through a full survey of the reference vessels together with sufficient technical investigation. Otherwise, many problems would be caused by mismatches between the appendages and the hull form. This paper investigates the design characteristics of some appendages, such as the side thruster, the shaft-strut, and the stern wedge, based on the design experience accumulated at Samsung, on CFD, and on model test results for high-speed passenger vessels. Further to this investigation, some practical and valuable design guidelines for such appendages are suggested.

• 대한조선학회논문집
• /
• 제34권2호
• /
• pp.39-47
• /
• 1997

본 연구에서는 수치계산을 동하여 선체-부가물 주위의 난류유동을 해석하였다. 지배방정식으로는 Navier-Stokes방정식과 연속방정식을 사용하였으며, 선체 및 부가물의 3차원 형상을 정도 높게 표현하기 위하여 물체적합좌표계 (Body-Fitted Coordinate System)를 도입하였다. 지배방정식들은 유한체적법 (Finite Volume Method)을 이용하여 이산화 하였으며, 난류모형으로는 SGS (Sub-Grid Scale)모형을 사용하였다. 계산 대상 선형으로 실험 및 계산 자료가 많은 Wigley선형을 선택하고, $Rn=1.0{\times}10^6$인 경우에 대하여 계산을 수행하여 부가물이 선체 주위의 난류유동에 미치는 영향을 예측할 수 있음을 보였다.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.184-192
• /
• 2014

The resistance of a high speed monohull can be dramatically increased at the high speed range due to the severe stern trim, spray formation and hull bottom pressure irregularity etc. In order to avoid these demerits associated with this resistance increase, various appendages such as the stern wedge, vertical wedge, stern flap, spray strip etc. have been studied. Each of appendage can control the trim angle and/or improve the resistance performance. If these appendages are combined for finding the maximal resistance reduction, there are enormous combination selections. This paper presents the DOE(Design of experiment) using an orthogonal array in order to decrease the model tests finding the optimum appendage combination. And we evaluate that the method introduced in this paper makes the optimal combination of appendages efficient and time-saving by applying to high speed semi-planing monohull. Here, the maximum speed and the least fuel expense are adopted as the decision criteria.

• Coupled systems mechanics
• /
• 제8권1호
• /
• pp.19-38
• /
• 2019

The influence of torsional rigidity of hinged flexible appendage on the linear dynamics of flexible spacecrafts with liquid on board was analyzed by considering the spacecraft's main body as a rigid tank, its flexible appendages as two elastically supported elastic beams, and the onboard liquid as an ideal liquid. The meniscus of the liquid free surface due to surface tension was considered. Using the Lagrangian of the spacecraft's main body (rigid tank), onboard liquid, and two beams (flexible appendages) in addition to assuming the system moved symmetrically, the coupled system frequency equations were obtained by applying the Rayleigh-Ritz method. The influence of the torsional rigidity of the flexible appendages on the spacecraft's coupled vibration characteristics was primary focus of investigation. It was found that coupled vibration modes especially that of appendage considerably changed with torsion spring parameter ${\kappa}_t$ of the flexible appendage. In addition, variation of the main body displacement with system parameters was investigated.

• 해양환경안전학회지
• /
• 제23권3호
• /
• pp.320-329
• /
• 2017

In this research, we have calculated characteristics of wave-piercing high-speed planing hull, by using a RANS solver and overset grid method, for comparing with experimental measurements of that and simulating with several appendages, since the computed results of commercial CFD code look reasonable for the prediction of the performances of planing hulls on calm water in planing conditions. As a result, it is confirmed that the dynamic instability phenomena in pitch and heave motions (porpoising) occurred after a certain $Fn_V$, and effectively suppressed using some of appendages, especially the 0.5L spray rail is suppressed to 24-55 % in the pitch motion and 33-55 % in the heave motion. In spray phenomenon, 1L hard chine suppress spray effectively and it is effective to set the angle of appendages to be less than $0^{\circ}$ in order to suppress wave.

• 한국전산유체공학회지
• /
• 제20권4호
• /
• pp.21-27
• /
• 2015

Flow field around the KRISO 3600TEU container ship is computed using a surface generated based on interpolations of station lines, which are given in a body plan of the ship, without using any CAD program. An interpolation method is suggested based on inscribed circles to generate curves between two neighboring station lines. The interpolated surface is saved in a STL format to use the snappyHexMesh utility of the openfoam. Computed resistance of the ship is compared with experimental and other computational results and the effects of the interpolation of neighboring station lines on the computed resistance are investigated. The suggested method is applied to calculate the flow field around a submarine with appendages. The surface triangulations for the hull and the appendages are generated without consideration of each other, then those surface triangulations are simply combined to provide a grid generator with the body boundary. The junctures of the hull and the appendages are identified automatically during the grid generation procedure. Tip vortex is captured, which travels downstream from the tip of the appendages.

• Journal of Species Research
• /
• 제11권3호
• /
• pp.169-173
• /
• 2022

Three species belonging to the genus Trapania Pruvot-Fol, 1931 are redescribed from Korea in this paper: Trapania euryeia Gosliner & Fahey, 2008, T. japonica (Baba, 1935), and T. toddi Rudman, 1987. Among these species, T. japonica is newly added to Korean fauna. The genus Trapania is characterized by a pair of extra-rhinophoral appendages on each side of the head, tentacular foot corners, a pair of extra-branchial appendages present around the gill, radula formula N×1.0.1. and consists of denticulated teeth, triaulic reproductive system, and minute spines on the armed penis. Herein, synonyms of the genus Trapania are summarized through a detailed literature review and the diagnostic characters of the genus Trapania are provided. Three species of the genus Trapania from Korea are distinguished from each other based on the color of extra-rhinoporal appendages and extra-branchial appendages, ground color, and distribution range of the brown markings on the dorsal surface. A taxonomic key to the genus Trapania in Korea is provided. In addition, the morphological characteristics of three trapanian nudibranchs in Korea are described and detailed photos of living animal are provided.