• 한국토양환경학회지
• /
• 제3권1호
• /
• pp.21-30
• /
• 1998

본 조사의 목적은 적적한 조사방법이 미흡한 주유소에서의 오염현황 조사방법 및 그에 따른 주변지역으로의 오염물질이전 및 환경적 영향을 평가하는 것이다. Site assessment 방법에는 몇가지의 접근방법이 있는데, 본 연구에서는 정덕영(1997)에 의해 제안된 임의선정법/특별조사법 중 임의 격자법을 사용하였다. 조사결과에 의하면, 주유소에서의 물질성상은 몇 가지의 형태로 분류할 수 있었다. 지층구조는 약 1.5M까지는 매립토 (잡석&모래)로 충진하였으며, 1.8-3.5M 까지는 부드러운 모래와 미사토(Silty Sand빈 자연적인 토양층을 나타내고 있었다. 또한 4.0M 가까이에는 풍화토(C층) 출현하였다. (그림3. 지층구조측면도 참조). 또한, 저장탱크지역의 지하수위는 약 2.0M이며 남쪽에 흐르고 있는 개천의 수위와 거의 일정하게 유지되고 있음을 알 수 있었다. 결론적으로, 본 주유소 현황조사에 의하면, 실제의 누출이 UST 및 배관에서 진행되었으며, 오염농도는 대책지역기준인 200PPM을 초과한 것이 확인되었고, 오염원은 면적기준 $45M^{2}$내지 $50M^{2}$에 깊이 약 4M정도로 확산되어 있으며 2.0M에 서 3.5M사이에 부분적으로 고농도로 축적되어 있는 것이 확인되었고 오염의 정도는 계절에 따른 지하수위의 차이에 의해 이동된 것을 본 연구를 통하여 알아낼 수 있었다.

• Safety and Health at Work
• /
• 제2권4호
• /
• pp.328-335
• /
• 2011

Objectives: Depressive disorder (DD) is a complex disease, and the assessment of work ability in patients with DD is also complicated. The checklist depression (CDp) has recently been developed to support such work ability assessments and has been recommended for implementation in insurance medicine, starting with an analysis of the organisational and social contexts. The aim of this study was to identify the potential facilitators and barriers in the use of the CDp by insurance physicians (IPs) during work ability assessments of employees on sick leave due to DD. Methods: A qualitative research was conducted based on semi-structured interviews. The participants were IPs with at least one year of work experience in performing work ability assessments. The interviews were audiotaped, transcribed and analysed qualitatively. Results: Ten IPs (7 males, 3 females; mean 53 years) were interviewed. Important facilitators, which emerged for use of the CDp, were an oral introduction for colleagues and staff, support from management, valuing the increased transparency in work ability assessments with using the CDp, having adequate time for assessments as well as modification of the appearance (colour, plasticised form) and content (clarifying aspects of the examples) of the assessment tool. The fear of the loss of autonomy, lack of added value of the CDp, high workload, inadequate instructions and lack of time were mentioned as barriers. Conclusion: Adequate introduction to the use of CDp and the fear of the loss of autonomy of IPs need special attention in planning its implementation.

• 한국의상디자인학회지
• /
• 제23권1호
• /
• pp.143-154
• /
• 2021

This study attempted to develop winter jackets and pants patterns reflecting the latest comfortable and active school uniform trends, using middle school boy avatars having various body shapes. Jacket and pants pattern-drawing methods and margins differed. Based on the results, research prototypes were prepared. Then, virtual wear prospective drawings, clothing pressure, and appearance were assessed according to body shape. Jackets were assessed using 25 factors, while pants were assessed using 19. Then, correlations between the jackets and pants were analyzed. According to the analysis, the reason why the dart & tuck position and margin were rated low was confirmed. In a virtual wear assessment on jacket patterns by body shape, a significant difference was found in all categories, except for fit and shape at the front bottom, sleeve length on the side, and the center back line. The virtual wear assessment on the pants patterns by body shape also revealed a significant difference in all categories, except for pants length. In jackets, a significant influence was observed around the shoulders and waist in Type 1 and around the belly in Type 2. On the contrary, for pants, a significant influence was found around the hip and waist in Type 1 and around back crotch in Type 2. Therefore, they should be considered when making of jackets and pants. The above results suggested that jacket and pants patterns should vary depending on body shape. It is anticipated that there should be further studies comparing brand-name school uniforms for middle school girls and school uniforms by body shape.

• 한국미생물·생명공학회지
• /
• 제50권1호
• /
• pp.51-62
• /
• 2022

Lactobacillus rhamnosus SKG34 (LrSKG34), a potential probiotic strain, was successfully isolated from Sumbawa Mare's milk. Our previous studies showed that the strain is resistant to gastrointestinal conditions, possesses antioxidant activity, and lowers blood cholesterol levels. Further clarification of the potential probiotic characteristics and safety assessment are necessary. This study aimed to evaluate the adhesion of LrSKG34 to Caco-2 cell monolayers and its effect on mucosal integrity in vitro. We also examined the LrSKG34 safety profile based on antimicrobial susceptibility testing, haemolytic activity determination, Caco-2 cell monolayer translocation evaluation, and in vivo investigation of the effect of LrSKG34 on the physiology, biochemical markers, and histopathological appearance of major organs in an animal model. LrSKG34 attached to Caco-2 cell monolayers and maintained mucosal integrity in vitro. The typical resistance of lactobacilli to ciprofloxacin, gentamicin, vancomycin, trimethoprim-sulfamethoxazole, and metronidazole was confirmed for LrSKG34. No haemolytic activity was observed on blood agar plates, and no LrSKG34 translocation was observed in Caco-2 cell monolayers. Administration of LrSKG34 to Sprague-Dawley rats did not adversely affect body weight. No abnormalities in hematological parameters, serum biochemistry levels, or histopathological structures of major organs were observed in LrSKG34-treated rats. Collectively, the results implicate LrSKG34 as a promising and potentially safe probiotic candidate for further development.

• 환경영향평가
• /
• 제31권4호
• /
• pp.265-270
• /
• 2022

여우 복원 사업이 시행됨에 따라 자연에 방사된 여우의 개체수가 증가하고 있어 앞으로는 여우 개체들이 다른 지역으로 분산되어 인간 생활 지역에서도 출몰할 것이다. 본 연구에서는 이에 따른 영향을 예측하고 대비하고자 여우의 서식지 적합성 지수(HSI)를 개발하였다. 문헌 조사를 통하여 주요 환경 변수를 추출한 뒤, GIS를 이용해 분석한 결과, 총 5가지의 적합 지수(Suitability Index, SI)를 구축하였다. 임상과 경사, 향, 수계 및 도로로부터의 거리가 주요 변수이며, 임상도에 2배의 가중치를 주어 산술 평균한 값이 HSI 결과이다. 전국자연환경조사 자료와 비교한 결과, 여우 좌표들이 평균 0.64의 HSI의 값을 가지는 것으로 나타나며, 0.53 이상일 때에 출현 확률이 높은 것으로 보인다. 본 연구 결과를 활용하여 여우의 분포를 사전에 예측하여 앞으로의 복원 계획의 기초 자료로 사용하거나 추후 환경영향평가 시 분포 파악 및 저감 방안 마련에 도움이 될 것으로 기대한다.

• Journal of Acupuncture Research
• /
• 제26권6호
• /
• pp.101-110
• /
• 2009

Objectives : We developed and proposed a guideline for safety and performance assessment of electric cupping apparatus(Class 2 medical device). Methods : We drafted the guideline for safety and performance assessment of electric cupping apparatus by referring the existing standards and guideline, based on online questionnaire for Korean medical doctors and measurement data from commercially available products. Physical dimension of cups and inner vacuum pressure were acquired for the measurement in order to achieve the purposes. Results : This guideline only can be applied to electric cupping apparatus for enhancing blood circulation by employing negative pressure generated by electricity. Seven items of appearance and label, operation test of pump, variation test of input electricity, vacuum level test, vacuum sustain test, cup-size dependent test, noise level test are suggested for evaluation subjects and methods required for electric cupping devices. Requirements for the design and development of electric cupping devices are suggested: vacuum level indicator, vacuum generation rate, pressure control, valve detachment stability, cup comparability, safety measure, surge protection, user friendliness, instruction for use (IFU). Conclusions : We proposed a guideline for safety and performance assessment of electric cupping apparatus to improve the quality of relating products and aid the commercialization of them, by aiming higher industrial competitiveness of the medical device sectors in Korea. Discussion with related institutes such as industry, academy and government is further required. Public hearings also need to be held prior to the establishment of a final guideline and standard.

• 복식
• /
• 제65권1호
• /
• pp.104-117
• /
• 2015

Recently, the fashion industry has been integrating with The IT industry in order to develop in various ways. This study looks into ways to utilize the 3D CAD system, which would reduce time and cost while producing samples, and strengthen the communication between the brand and its cooperators by deploying knit designs using Knit CAD system's 3D virtual clothing program. The research method was reference, Internet resources 3D fashion CAD system and 3D Knit CAD system. Based on the data, simulation of the complete design of 4 deployed knit designs was done by using 3D virtual clothing program of the Knit CAD system utilizing knit design elements. One of each design element among the virtual clothing designs was chosen to produce real clothing, and the experts did verification on the appearance assessment of 3D virtual clothing knit designs of the Knit CAD system. As a result, 3D virtual clothing knit design of the Knit CAD system proved itself as an efficient system in terms of time and cost.

• 한국염색가공학회지
• /
• 제17권2호
• /
• pp.19-25
• /
• 2005

A colour-difference formulae would be based on a colour appearance model, but, So far, most colour-difference formulae in common use are based on empirical fits to data. Therefore, of the many proposed, none are completely satisfactory but advances have been made in recent years. A new color-difference data set has been produced with the aims of making a comparison of the advanced CIE Lab formulae as well as confirming the effect of color-difference. 416 low lightness pairs that have only lightness-difference were produced for evaluation of CIE Lab-based formulae on lightness-difference from glossy polyester fabric. The standard color-difference pair was prepared and used. It was neutral grey sample pair that has only lightness difference. The standard pair was used to investigate lightness tolerances. And grey-scale method used to evaluate visual assessment. CIE Lab coordinates of the samples were measured using a X-Rite 8200 spectrophotometer. Visual assessments were carried out using Gretag Macbeth The Judge II Light Booth. A study of color tolerances at low lightness was carried out and get avaliable some results.

• 한국초등수학교육학회지
• /
• 제19권2호
• /
• pp.143-158
• /
• 2015

본 연구는 스토리텔링 기반 수학교과서에 대한 인식을 분석하기 위해 초등 1,2학년 교사를 대상으로 초점집단면담을 실시하였다. 참여교사들은 개정 교과서의 주요 변화로서 스토리텔링의 도입을 인식하고 있으나, 교수-학습 과정에서 학생들에게 실질적인 영향을 미치는 변화는 다른 데 있음을 강조하였다. 예를 들어, 개정 교과서의 외형의 변화, 준비물 꾸러미의 역할, 평가문항의 변화, 체험 및 탐구활동의 증가 등이 스토리텔링의 도입 못지않게 실제 수업에 많은 영향을 미치고 있음이 드러났다. 이러한 결과는 향후 교과서 개발에서 어느 부분에 초점을 두어야 하는지에 대한 시사점을 제공한다.

• 한국조리학회지
• /
• 제24권1호
• /
• pp.13-23
• /
• 2018

This study aimed to investigate the characteristics of 3 pre-treatment of mealworm(Tenebrio molitor), and offer basic research data through appropriate pre-treatment method based on the component analysis result. This study was preparing the control group sample No.0(not contain mealworm), and the other sample (Sample No.1,2,3) was using the mealworm prepared in each of the three methods. By using the sample, this study conducted an inspection for component analysis, mineral contents, pH, color value, total amount polyphenols, DPPH radical scavenging activity, reducing power, acceptance test. Each experiments are three times repeated and validated following the one-way ANOVA analysis to verify a significant difference. Acceptance test conducted by 50 consumers indicate consumption decision for sunsik. using the seven point scale, assessment for appearance, flavor, taste, texture, overall acceptance. The research findings showed that sample containing sauted mealworm(SE2) is higher preference and significant in antioxidant activity(total amount polyphenols, DPPH radical scavenging activity, reducing power). Therefore, it is better to use sauted. The result of this study suggest that sauted mealworm is good ingredient for consumer acceptability and functionality of sunsik. According to results of the study, it is suggested to make better use of food, and provide food developer with meaningful date for market targeting. In addition, this study also provides the information for improving awareness of edible insect.