• 대한안전경영과학회지
• /
• 제18권2호
• /
• pp.119-125
• /
• 2016

The ratio which we usually use in producing products is nonconforming proportion or percent defective. As our modern society develops, we cannot but meet another proportion in legal, managerial, and medical areas where our human beings might commit various kinds of errors though they do not want them. In this paper we will generally call the ratio 'proportion.' When the size of such proportion as percent defective is observed by persons, it is not true proportion but apparent proportion because it has been observed with human or situational errors. Past studies have not systematically covered the analysis of relations between such proportions and type 1 and 2 error, but this paper analyses and derives such various relations, and it suggests the guideline as sixteen properties for utilization and sensitive analysis of the relations. Current paper's consideration of apparent proportion in addition to true proportion as our familiar concept will open and widen existing academic and application areas where people have mainly built societal, scientific and engineering rules and methods based only on true proportion.

• Journal of Pharmaceutical Investigation
• /
• 제1권1호
• /
• pp.70-77
• /
• 1971

The ointment, had discovered and used from the ancient, have not ever defined to qualitity as the hardness concerned with the absorned With the absorption of the effect of durg through the skin. Auther, for the first time, suggest the apparent logarithmic hardness against the penetration of ointment registered on the pharmacopeia of the Republic of Korea, the results are as the followings. 1. The speciality of this apparent logarithmic hardness ie in proportion for the solidity on the contrary to the penetration of oiniment, and the distribution range of it are between 1.68 to 3.53 for their ointments examined. 2. The specific gravity of the verious ointments according to the apparent logarithmic hardness may be ignore on the calculaiotn, the mean valve of the samples was 2.9303. 3. The determination of apparent logarithmic hardness(H) by the penetration method follows the under equation. $H=log_{10}({\frac{P-0.545h^3}{0.855h^2}})$ where, the h is the penetrate length described centimeter, and p is the weight of the cone.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권5호
• /
• pp.620-633
• /
• 1998

Methods developed for measuring digestibility and availability of amino acids in feedstuffs used in pig nutrition are reviewed. Digestibility is a proportion of an amino acid in a feed that is absorbed from the digestive tract and should be determined from the difference between the amount of amino acid consumed and passing the distal ileum. Techniques for ileal digesta sampling including various types of cannulas: a re-entrant, T-piece, IPV, IPVC and ileaorectal anastomosis are described and comparisons amongst these methods are presented. Other methodologies like mobile bag technique, in vitro assays and mathematical prediction method are also described. Significance and methodologies for measurement of endogenous nitrogen and amino acids losses at the distal ileum and their effect on the apparent and true nitrogen and amino acid digestibilities in feeds are discussed. Factors influencing the apparent and true amino acid digestibilities such as dry matter intake, protein, fibre and antinutritive compounds content in the diet are discussed. Amino acid bioavailability -the proportion of the total amino acid digested and absorbed in a form utilized in metabolism - measured by the growth assay may differ from its ileal digestibility. Chemical methods for determination of available lysine content in heat treated feeds are evaluated.

• Environmental Engineering Research
• /
• 제11권1호
• /
• pp.54-61
• /
• 2006

An electron probe microanalysis (EPMA) investigation can provide quantitative and qualitative insight into the nature of the surface and bulk chemistry on solidified waste forms(SWF). The proportion of Pb in grain areas is below 0.3 wt. %, and the proportion near the border of the grain slightly increases to 0.98 wt. % but in the inter-particle areas farther from the grain, the concentration of Pb markedly increases. It is apparent that very little Pb diffuses into the tricalcium silicate($C_3S$) particles and most of the Pb exists as precipitates of sulfate, hydroxide, and carbonate in the cavity areas between $C_3S$ grains. Calcite additions on Pb-doped SWF are also observed to induce deeper incorporation of lead into the cement grains with EPMA line-analysis of cross-sections of cement grains. The line-analysis reveals the presence of $0.2{\sim}5$ weight % Pb over $5\;{\mu}m$ from cement grain boundaries. In the inter-particle areas, the ratio of Ca, Si, Al and S to Pb is relatively similar even at some distance from the grain border and the Pb (wt. %) ratio is reasonably constant throughout the whole inter-particles area. It is apparent that the enhanced development of C-S-H on addition of calcite can increasingly absorbs lead species within the silica matrix.

• Journal of Pharmaceutical Investigation
• /
• 제26권4호
• /
• pp.263-271
• /
• 1996

Sulconazole nitrate(SCN), an imidazole derivative which has been effective in the treatment of dermatophytosis, tinea versicolor and candidiasis, was formulated as a gel containing drug, poloxamer 407, ethanol and propylene glycol. The resulting SCN gels were evaluated with respect to their viscosity, drug release rate, skin permeation rate. The apparent viscosity of SCN gel increased in proportion to poloxamer 407, drug and propylene glycol concentration. In case ethanol was added, the apparent viscosity decreased. The drug release rate of SCN gel increased in proportion to temperature and ethanol concentration. But the drug release rate decreased as the concentration of poloxamer 407 increased. The increase of drug concentration induced nonlinear increase of drug release rate. When propylene glycol was added at the level of 10%, the drug release rate increased but from 15% it decreased. The skin permeation rate decreased in high concentration of poloxamer 407. The skin permeation rate of SCN gel containing 15% ethanol increased about twice than that of gel without ethanol. The increase of drug concentration induced nonlinear increase of skin permeation rate. When propylene glycol was added at the level of 10%, the skin permeation rate increased but from 15% it decreased.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권3호
• /
• pp.370-378
• /
• 2017

Objective: An experiment was conducted to investigate the effects of a specific mixture of essential oils (MEO), containing thyme, clove and cinnamon EO, on rumen microbial fermentation, nutrient apparent digestibility and blood metabolites in fistulated sheep. Methods: Six sheep fitted with ruminal fistulas were used in a repeated measurement design with two 24-d periods to investigate the effect of adding MEO at 0 (control), 0.8, and 1.6 mL/d on apparent nutrient digestibility, rumen fermentation characteristics, rumen microbial population and blood chemical metabolites. Animals were fed with a 50:50 alfalfa hay:concentrate diet. Results: Ruminal pH, total volatile fatty acids (VFA) concentration, molar proportion of individual VFA, acetate: propionate ratio and methane production were not affected with MEO. Relative to the control, Small peptides plus amino acid nitrogen and large peptides nitrogen concentration in rumen fluid were not affected with MEO supplementation; while, rumen fluid ammonia nitrogen concentration at 0 and 6 h after morning feeding in sheep fed with 1.6 mL/d of MEO was lower (p<0.05) compared to the control and 0.8 mL/d of MEO. At 0 h after morning feeding, ammonia nitrogen concentration was higher (p<0.05) in sheep fed 0.8 mL/d of MEO relative to 1.6 mL/d and control diet. Ruminal protozoa and hyper ammonia producing (HAP) bacteria counts were not affected by addition of MEO in the diet. Relative to the control, no changes were observed in the red and white blood cells, hemoglobin, hematocrit, glucose, beta-hydroxybutyric acid, cholesterol, total protein, albumin, blood urea nitrogen and aspartate aminotransferase and alanine aminotransferase concentration. Apparent total tract digestibility of dry matter, crude proten, organic matter, and neutral detergent fiber were not influenced by MEO supplementation. Conclusion:The results of the present study suggested that supplementation of MEO may have limited effects on apparent nutrient digestibility, ruminal fermentation and protozoa and HAP bacteria count, blood cells and metabolites.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권11호
• /
• pp.1591-1598
• /
• 2002

The effect of different dietary structural carbohydrate (SC) to nonstructural carbohydrate (NSC) ratios on fiber degradation, digestion, flow, apparent digestibility and rumen fluid characteristics was studied with a design using 18 wethers fitted with permanent rumen and duodenum cannulae. All sheep were divided into six groups randomly, receiving six diets with varying SC to NSC ratios. All diets contained the same proportion of wheat straw and concentrate. The dietary SC to NSC ratios were adjusted by adding cornstarch to the concentrate supplements. The duodenal and fecal flows of dry matter (DM), neutral detergent fiber (NDF), acid detergent fiber (ADF), hemicellulose (HC) and cellulose (CEL) were estimated using chromium-mordanted wheat straw as a flow marker. The degradation parameters of wheat straw DM, NDF, ADF, HC and CEL were determined by incubating the ground wheat straw in nylon bags in the rumen for different periods of time. There was no effect (p>0.05) of the different dietary SC to NSC ratios on rumen pH or $NH_3$-N, but acetate, propionate and butyrate concentrations were significantly affected (p<0.05 or p<0.01) by dietary SC to NSC ratios in the rumen fluid. When the dietary SC to NSC ratio was 2.86, the highest rumen degradability of wheat straw DM, NDF, ADF and CEL was found, but the highest apparent rumen digestibilities of DM, NDF, ADF, HC and CEL occurred at a 2.64 SC to NSC ratio. However, because of compensatory digestion in the hindgut, the apparent digestibilities of DM, NDF, ADF, HC and CEL were highest when the dietary SC to NSC ratio was 2.40. In conclusion, there is a optimal range of dietary SC to NSC ratios (between 2.86 and 2.40) that is beneficial to maximize wheat straw fiber degradation and apparent digestibility.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권9호
• /
• pp.1355-1359
• /
• 2003

This study examined the replacement of the fish meal (FM) with commercial poultry by-product meal (PBM) in practical diets for rainbow trout (Onchorynchus mykiss, Walbaum). Five isocaloric and isonitrogenous diets containing levels 0 (control), 10, 20, 30 and 40% of PBM as a replacement for FM were fed to three replicate groups of rainbow trout with a initial weight $34.50{\pm}0.43g$ (mean${\pm}$SE). Protein efficiency ratio (PER) of diets containing PBM up to 20% were similar to the control while significantly lower values were obtained from the groups receiving higher levels of PBM (p<0.05). Apparent protein digestibility coefficients (ADCs) were significantly lower than that of the control group when PBM was included at level of 20% or more. Similarly, significantly lower values were observed with diets containing 30 and 40% PBM in terms of dry matter, organic matter, ether extract, ash and energy digestibility (p<0.05). Dietary treatments did not significantly affect the body composition of the fish in terms of dry matter, crude protein, ether extract and ash. In conclusion, PBM in a proportion of 20% may replace about 40 % of FM in rainbow trout diet without significant impairment grow.

• 한국농공학회지
• /
• 제41권1호
• /
• pp.97-105
• /
• 1999

Recently , polymer concrete has been widely used in the construction industry because of its quick setting, high strength, excellect adhesion, watertightness and chemical resistance compared to ordinary cement concrete. Its application is also increased. In this paper, lightweight polymer mortars using unsaturated polyester resin and lightweight aggregate are prepared with various mix proportations, and tested for slump working life, apparent specific gravity , flexural and compressive strengths. As a result, the slump and working life can be controlled and thier flexural and compressive strengths are 9.7 to 22.0 MPa , and 23.0 to 100.8 MPa respectively at apparent specific gravities of 0.86 to 1.73.

• 한국건축시공학회지
• /
• 제8권3호
• /
• pp.111-117
• /
• 2008

This study provides the setting time prediction method of super retarding concrete incorporating mineral admixtures at the same time including fly ash(FA), blast furnace slag(BS) based on maturity method. The setting time was retarded, as super retarding agent contents increase and curing temperature decreases. In addition, apparent activation energy by Arrhenius function was ranged from $24{\sim}35KJ/mol$ with slightly difference along with mixture proportion. This value is smaller than existing value $30{\sim}50KJ/mol$. It is Indicated that equivalent age using setting time can be a proper method to predict setting time and it also exhibited comparable relativity between prediction value and measurement value. Therefore, this study provided setting time prediction value with super retarding agent contents and mineral admixture combination. Setting time prediction equation provided herein is possibly valid for estimating precise setting time of the super retarding concrete at the job site.