• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.395-395
• /
• 2011

일반적으로 태양전지에서 anti-reflection layer는 조사되는 태양 광을 좀 더 많이 사용하기 위하여 nitride나 oxide와 같은 막을 표면에 형성한다. 본 연구는 이 anti-reflection으로 사용되는 nitride와 oxide의 각각의 두께와 굴절률 변화에 따른 특성변화를 SILVACO를 이용하여 전산모사하고 그 특성변화를 분석하였다. Anti-reflection layer가 없을 경우에는 조사된 빛에 따른 available photo current 활용이 낮았으며, 특히 그 경향은 단파장영역에서 두드러지게 나타났다. 따라서 anti-reflection layer의 최적화를 위해서 두께를 가변하여 available photo current를 분석하였으며, 각 물질의 굴절률 변화 및 이중층 구조의 anti-reflection layer를 형성하고 특성변화를 분석함으로써 최적화하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.127-127
• /
• 2009

The most important part of the fabrication solar cells is the anti-reflection coating when excludes the kinds of silicon substrates (crystalline, polycrystalline, or amorphous), patterns and materials of electrodes. Anti-reflection coatings reduce the reflection of sunlight and at last increase the intensity of radiation to inside of solar cells. So, we can obtain increase of solar cell efficiency about 10% using anti-reflection coating. There are many kinds of anti-reflection film for solar cell, such as SiN, $SiO_2$, a-Si, and so on. And, they have two functions, anti-reflection and passivation. However such materials could not perfectly prevent reflection. So, in this work, we investigated the anti-reflection coating with the columnar structure ZnO thin film. We synthesized columnar structure ZnO film on glass substrates. The ZnO films were synthesized using a RF magnetron sputtering system with a pure (99.95%) ZnO target at room temperature. The anti-reflection coating layer was sputtered by argon and oxygen gases. The angle of target and substrate measures 0, 20, 40, 60 degrees, the working pressure 10 mtorr and the 250 W of RF power during 40 minutes. The confirm the growth mechanism of ZnO on columnar structure, the anti-reflection coating layer was observed by field emission scanning electron microscopy (FE-SEM). The optical trends were observed by UV-vis and Elleso meter.

• Current Photovoltaic Research
• /
• 제10권4호
• /
• pp.95-100
• /
• 2022

Solar cell is a device that converts photon energy into electrical energy. Therefore, absorption of solar spectrum light is one of the most important characteristics to design the solar cell structures. Various methods have emerged to reduce optical losses, such as textured surfaces, back contact solar cells, anti-reflection layers. Here, the anti-reflection coating (ARC) layer is typically utilized whose refractive index value is between air (~1) and silicon (~4) such as SiN_x layer (~1.9). This research is to print a material called polydimethylsiloxane (PDMS) to form a double anti-reflection layer. Light with wavelength in the range of 0.3 to 1.2 micrometers does not share a wavelength with solar cells. It is confirmed that the refractive index of PDMS (~1.4) is an ARC layer which decreases the reflectance of light absorption region on typical p-type solar cells with SiN_x layer surface. Optimized PDMS printing with analyzing optical property for cell structure can be the effective way against outer effects by encapsulation.

• 한국전기전자재료학회논문지
• /
• 제29권12호
• /
• pp.814-818
• /
• 2016

DSSCs (dye-sensitized solar cells) based on $TiO_2/SiO_2$ multi layer AR (anti-reflection) coating on the outer glass FTO (fluorine-doped tin oxide) substrate are investigated. We have coated an AR layer on the surface of a DSSCs device by using an IAD (ion beam-assisted deposition) system and investigated the effects of the AR layer by measuring photovoltaic performance. Compared to the pure FTO substrate, the multi layer AR coating increased the total transmittance from 67.4 to 72.9% at 530 nm of wavelength. The main enhancement of solar conversion efficiency is attributed to the reduction of light reflection at the FTO substrate surface. This leads to the increase of Jsc and the efficiency improvement of DSSCs.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권4호
• /
• pp.483-491
• /
• 2017

The interdigitated germanium (Ge) meta-lsemiconductor-metal (MSM) photodetectors (PDs) with and without an $SiO_2$ anti-reflection (AR) layer was fabricated, and the effect of $SiO_2$ AR layer on their optoelectronic response properties were investigated in detail. The lowest reflectance of 15.6% at the wavelength of 1550 nm was obtained with a $SiO_2$ AR layer with a thickness of 260 nm, which was in a good agreement with theoretically calculated film thickness for minimizing the reflection of Ge surface. The Ge MSM PD with 260 nm-thick $SiO_2$ AR layer exhibited enhanced device performance with the maximum values of responsivity of 0.65 A/W, the quantum efficiency of 52.2%, and the detectivity of $2.49{\times}10^9cm\;Hz^{0.5}W^{-1}$ under the light illumination with a wavelength of 1550 nm. Moreover, time-dependent switching analysis of Ge MSM PD with 260 nm- thick $SiO_2$ AR layer showed highest on/off ratio with excellent stability and reproducibility. All this investigation implies that 260 nm-thick $SiO_2$ AR layer, which is effective in the reduction in the reflection of Ge surface, has a great potential for Ge based optoelectronic devices.

• 한국진공학회지
• /
• 제19권5호
• /
• pp.341-346
• /
• 2010

본 논문에서는 반응성 스퍼터링(Reactive Sputtering) 공정으로 $Si_xO_y$ 박막과 $Si_xN_y$ 박막을 4층 구조로 적층하고 400~700 [nm]의 가시광 영역에서 빛의 반사를 줄이기 위한 반사방지 코팅(Anti-Reflection Coating)으로의 응용 가능성을 조사하였다. 스퍼터링 타겟으로 6 [inch] 직경의 Si 단결정을 사용하였고, 반응성 스퍼터링 가스는 $Si_xO_y$ 박막 증착에서 Ar과 $O_2$를, $Si_xN_y$ 박막 증착에서는 Ar과 $N_2$를 사용하였으며, 스퍼터링 파워로는 DC pulse를 사용하였다. 1,900 [W] DC pulse power에서 Ar:$O_2$=70:13 [sccm]의 반응성 스퍼터링으로 2.3 [nm/sec]의 증착률과 1.50의 굴절률을 보이는 $Si_xO_y$ 박막을 제작하였고, Ar:$N_2$=70:15 [sccm]의 반응성 스퍼터링으로 1.8 [nm/sec]의 증착률과 1.94의 굴절률을 보이는 $Si_xN_y$ 박막을 제작하였다. 이 두 종류의 박막을 이용해서 시뮬레이션을 통해 4층 구조의 반사방지 코팅 구조를 설계한 후, 설계결과에 따라 각 박막의 두께를 순차적으로 변화시켜 증착하였다. 4층 구조 $Si_xO_y-Si_xN_y$의 반사도 측정 결과 550 [nm] 대역에서 1.7 [%]의 반사와 400 [nm]와 650 [nm] 영역에서 1 [%]의 반사를 보였으며, 가시광 영역에서 성공적인 "W" 형태의 반사방지 코팅 특성을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.424-425
• /
• 2007

Anti-Reflection and High-reflection coating on the facet of semiconductor laser diode. To prevent internal feedback from both facets for realizing super luminescent diode and reducing the reflection-induced intensity noise of laser diode. Anti-Reflection coating Film was designed by Macleod Simulator. Coating Materials were decided $Ti_3O_5$ and $SiO_2$. Thickness of Coating layer $Ti_3O_5/SiO_2$ were 105[nm], 165[nm]. In the study Anti-Reflection coating Film was design for Laser diode and deposited by Ion-Assisted Deposition system. Then manufactured thin film measured electrical properties(L-I-V, Se, Resistor) and Optical properties(wavelength FFP). Slop-efficiency and FFP characteristic is 0.302[W/A], $22.3^{\circ}$(Horizontal), $24.4^{\circ}$(Vertical).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.322-322
• /
• 2010

Recently, anti-reflective films (AR) are one of the most studied parts of a solar cell since these films improve the efficiency of photovoltaic devices. Also, anti-reflection films on the textured silicon solar cells reduce the amount of reflection of the incident light, which improves the device performance due to light trapping of incident light into the cell. Therefore, we preformed two step processes to get textured Si (100) substrate in this experiment. Pyramid size of textured silicon had approximately $2{\sim}9\;{\mu}m$. A well-textured silicon surface can lower the reflectance to 10%. For more reduced reflection, TiO2 anti-reflection films on the textured silicon were deposited at $600^{\circ}C$ using titanium tetra-isopropoxide (TTIP) as a precursor by metal-organic chemical vapor deposition (MOCVD), and the deposited TiO2 layers were then treated by annealing for 2 h in air at 600 and $1000^{\circ}C$, respectively. In this process, the treated samples by annealing showed anatase and rutile phases, respectively. The thickness of TiO2 films was about $75{\pm}5\;nm$. The reflectance at specific wavelength can be reduced to 3% in optimum layer.

• 한국세라믹학회지
• /
• 제39권3호
• /
• pp.233-239
• /
• 2002

CRT의 전면에 전자파차폐, 정전기 방지 및 저반사 효과를 위해 코팅되는 $SiO_2$/ITO (Indium Tin Oxide) 이층박막의 반사특성에 관하여 연구하였다. 실리카층 및 ITO층의 두께를 변화시키며 나타나는 반사율의 경향을 고찰하고, 이론적인 2층, 3층 저반사코팅의 디자인에 적용시켜 보았다. 입자 상으로 코팅된 ITO는 두께가 증가할수록 기공에 의해 박막의 불균일성이 증가하면서 이론적인 반사모델과의 차이가 커졌다. 실리카와 ITO의 계면에 존재하는 혼합층의 영향으로 인하여 실제측정반사율은 2층으로 디자인한 이론반사율보다 $SiO_2$/$SiO_2$+ITO/ITO의 3층으로 디자인한 반사모델에 보다 잘 적용되었다. 이론적인 저반사 디자인은 근거로 $SiO_2$/ITO 박막의 두께를 90, 65 nm로 조절한 이층막은 기준파장에서 2.5%의 반사율을 나타내었고, 가시광선 영역에서 이론반사율과 유사한 거동을 보였다.

• 전기학회논문지
• /
• 제61권5호
• /
• pp.705-710
• /
• 2012

An anti-reflection layer (AR) is used in the solar cell to improve the amount of the irradiated light, resulting in the improvement of the performance of the solar cell. In this study, the zinc oxide (ZnO) AR is applied to the dye-sensitized solar cell (DSC) by using zinc nitrate solution. The conditions such as solution concentration and sintering temperature for fabricating the ZnO AR are changed to optimize the performance of the AR. As a result, the best performance is shown when the zinc nitrate solution with 100mM concentration is used and the sintering temperature is $600^{\circ}C$. And then, the ZnO AR formed with these optimal conditions is applied to the DSC. Consequently, a DSC with a ZnO AR had an increased current density up to 13.86$mA/cm^2$ and an enhanced efficiency of 6.32%.